Manual

ManualsBrandsJBL ManualsAcousticsSB210

Satellite

Outputs

Left Right

System #5 in Stereo

SPL (at 20 Feet):

94 dB Continuous (peaks of 104 dB)

From

Power

Amp

Left

Right

MODULE SETTINGS:

Stereo / Mono Selector: Stereo

4-Ohm / 8-Ohm Selector: 4-Ohms

Input

Terminals

Control SB-210 with

MTC-210-SAT Crossover Input Module

Control 25AV

(8 ohm setting)

Control 25AV

(8 ohm setting)

Control 25AV

(8 ohm setting)

Control 25AV

(8 ohm setting)

Using subwoofers and satellite loudspeakers with a pre-engineered passive crossover built into the

subwoofer can be a very eﬀective way of achieving high-ﬁdelity sound economically for applications

requiring greater bandwidth than is typically possible from full-range speakers alone.

When applied properly, small subwoofer-satellite systems – often referred to as “sub-sat” systems –

can provide high ﬁdelity sound for a wide variety of applications, such as restaurants, retail stores,

hotels, music cafes, leisure venues, sports bars & lounges, ﬁtness centers, themed applications, and

many more.

is guide provides recommended subwoofer-satellite conﬁgurations that work well together. In

addition, the Connection Information and System Design sections provide important information

for applying these subwoofer-satellite systems properly.

APPLICATION GUIDE

Subwoofer-Satellite Systems

Using Control SB-210 & SB-2 Subwoofers

System #5 in Stereo Mode Shown

Summary of content (20 pages)

PAGE 1
APPLICATION GUIDE Subwoofer-Satellite Systems Using Control SB-210 & SB-2 Subwoofers System #5 in Stereo SPL (at 20 Feet): 94 dB Continuous (peaks of 104 dB) Control 25AV Control 25AV (8 ohm setting) (8 ohm setting) Left Right Control 25AV Control 25AV (8 ohm setting) (8 ohm setting) Satellite Outputs Left From Power Amp MODULE SETTINGS: Stereo / Mono Selector: Stereo 4-Ohm / 8-Ohm Selector: 4-Ohms Input Terminals Right Control SB-210 with MTC-210-SAT Crossover Input Module System #5 in Ster
PAGE 2
PAGE 3
Table of Contents SIX SUB-SAT SYSTEMS AT A GLANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SATELLITE CONNECTION INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . 3 SYSTEM CONSIDERATIONS General Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
SUB-SAT SYSTEMS AT A GLANCE Detailed Information About Each System and Application Guidelines are on the Following Pages. System Number (Max Cont. @ 20 ft) Modes Ω Per Amp Channel Stereo Only 4Ω Mono 8Ω SPL Products Applications Surface-Mount (On-Wall) Satellite Speakers System 1 4 x Control 23 1 x SB-2 Light volume ambient music in medium size spaces where four speakers are needed.
PAGE 5
Important Satellite Connection Information For Mono (& 70V Mono) Systems For Mono systems, always connect half the satellite speakers to one of the satellite speaker output terminals and the other half to the other satellite speaker output terminals. Do NOT connect to only one of the sets of satellite output terminals.
PAGE 6
Sub-Sat System Design The exact configuration of a subwoofer/satellite loudspeaker system depends on a number of factors, such as: • How large the room is and how many satellite speakers it will take to cover the room? • Whether the distance between the satellite speakers allows a single subwoofer to cover the entire space? • Whether the program material is light background music or dominant driving music? • Where the subwoofer will be located in relation to room boundaries (wall, ceiling, corners)? The sys
PAGE 7
Sub-Sat Design Considerations Sound Level Capability 4 Ohm / 8 Ohm Setting For each system in this guide, the Max SPL figure is listed, describing the continuous sound level that the system can maintain on a full-range basis with either speech or music program content, with 10 dB headroom for clear transient peaks.
PAGE 8
Adjusting Volume of 70V/100V System Adjust the tap setting to change the amount of power that gets to the entire sub/sat system. Multiple Systems Multiple sub-sat systems can be utilized on a single 70V/100V distributed speaker line. Each can cover a different area with full-range sound. Systems can be mixed on a 70V/100V line as long as all the systems utilized the MTC-210T-SAT module. See Figure 2.
PAGE 9
Systems with SURFACE-MOUNT (on-wall) Satellite Speakers System #1: CCS6000 System 4 pcs Control 23 with Control SB-2 Application Application Note: Light volume ambient music in medium size spaces where four speakers are needed. This combination produces a great full-range sound with flat frequency response, usable from 38 Hz to 22 kHz. Max Continuous Average SPL (at 20 feet) Do NOT use a different quantity or model of satellite speaker.
PAGE 10
System #2 2 pcs Control 25AV & Control SB-210 Application: Light to medium volume ambient music in small to medium sized spaces where two satellite speakers are enough to cover the area. This system produces excellent high fidelity sound quality with very strong bass.
PAGE 11
System #2 in Stereo SPL (at 20 Feet): 91 dB Continuous (peaks of 101 dB) Control 25AV Left (8 ohm setting) Control 25AV Right (8 ohm setting) Satellite Outputs Left From Power Amp MODULE SETTINGS: Stereo / Mono Selector: Stereo 4-Ohm / 8-Ohm Selector: 8-Ohms Input Terminals Right Control SB-210 with MTC-210-SAT Crossover Input Module Stereo System Connection Note Ensure that the polarity hookup of the left and right inputs is correct.
PAGE 12
System #3 2 pcs Control 28 & Control SB-210 Application: Medium volume ambient music in small spaces where two satellite speakers are enough to cover the area. Max Continuous Average SPL (at 20 feet): 95 dB (with peaks of 105 dB) Max Output Balance -- The subwoofer has higher maximum output capability than the satellite speakers, so this system has the capability of being utilized for applications where the bass will be EQ’d substantially higher than the mids and highs.
PAGE 13
System #3 in Stereo SPL (at 20 Feet): 95 dB Continuous (peaks of 105 dB) Right Left Control 28 Control 28 Satellite Outputs Left From Power Amp SUBWOOFER: Control SB-210 & MTC-210-SAT Crossover Input Module Input Terminals MODULE SETTINGS: Stereo / Mono Selector: Stereo 4-Ohm / 8-Ohm Selector: 8-Ohms Right Control SB-210 with MTC-210-SAT Crossover Input Module Stereo System Connection Note Ensure that the polarity hookup of the left and right inputs is correct.
PAGE 14
System #4 2 pcs Control 29AV & Control SB-210 Connection Application High volume, high-fidelity music reproduction in small spaces where two satellite speakers are enough to cover the area. Mono Operation – Connect input to the LEFT input terminal. Put Stereo/Mono header into MONO position. Connect 1 pc of Control 28 to each satellite output (LEFT and RIGHT). Do NOT connect both satellite speakers to a single satellite output.
PAGE 15
System #4 in Stereo SPL (at 20 Feet): 96 dB Continuous (peaks of 106 dB) Left Control 29AV-1 Right Control 29AV-1 Satellite Outputs (8 Ohm Setting) (8 Ohm Setting) Left From Power Amp MODULE SETTINGS: Stereo / Mono Selector: Stereo 4-Ohm / 8-Ohm Selector: 8-Ohms Input Terminals Right Control SB-210 with MTC-210-SAT Crossover Input Module Stereo System Connection Note Ensure that the polarity hookup of the left and right inputs is correct.
PAGE 16
System #5 4 pcs Control 25AV & Control SB-210 Connection Application Medium volume, high-fidelity music reproduction where 4 satellite speakers are needed to cover the area. Mono Operation – Connect input to the LEFT input terminal. Put Stereo/Mono header into MONO position. Connect 2 pcs of Control 25AV to each satellite output (LEFT and RIGHT). Do NOT connect all 4 satellite speakers to a single satellite output.
PAGE 17
System #5 in Stereo SPL (at 20 Feet): 94 dB Continuous (peaks of 104 dB) Control 25AV Control 25AV (8 ohm setting) (8 ohm setting) Left Right Control 25AV Control 25AV (8 ohm setting) (8 ohm setting) Satellite Outputs Left From Power Amp MODULE SETTINGS: Stereo / Mono Selector: Stereo 4-Ohm / 8-Ohm Selector: 4-Ohms Input Terminals Right Control SB-210 with MTC-210-SAT Crossover Input Module Stereo System Connection Note Ensure that the polarity hookup of the left and right inputs is correct.
PAGE 18
Systems with IN-CEILING Satellite Speakers In-ceiling loudspeakers can benefit from the addition of a subwoofer. Often that takes the form factor of an in-ceiling subwoofer like Control 19CS or Control 312CS, but it may be desirable to use a subwoofer with a full passive crossover. For more information about model selection, see the “Subwoofer Model Selection” and “Designing for Other JBL Subwoofer Models” sections, above.
PAGE 19
System #6 in Stereo SPL (at 10 Feet): 96 dB Continuous (peaks of 106 dB) Control 24C Control 24C Control 24C Right Left Control 29AV-1 Control 29AV-1 Satellite Outputs (8 Ohm Setting) Control 24C (8 Ohm Setting) Left From Power Amp MODULE SETTINGS: Stereo / Mono Selector: Stereo 4-Ohm / 8-Ohm Selector: 8-Ohms Input Terminals Right Control SB-210 with MTC-210-SAT Crossover Input Module Stereo System Connection Note Ensure that the polarity hookup of the left and right inputs is correct.
PAGE 20
JBL Professional 8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A.