AURA WALL MOUNT STEREO MODEL：JBL-AURA FCC ID: OKUSBF19E80 OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE.
13 ) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped. 6 ) Clean only with dry cloth Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS 2 12 AUX 1 OPERATION 14 1 INTRODUCTION 5 13 AUX 2 OPERATION 15 2 WHAT’S IN THE BOX 5 14 OPTICAL IN OPERATION 15 3 PRODUCT OVERVIEW 6 15 HDMI IN AND HDMI OUT 16 4 SPEAKER/POWER WIRE SOCKET DIAGRAM 7 16 HDMI OUT (ARC) ONLY 17 5 REMOTE CONTROL 8 17 BLUETOOTH OPERATION 18 6 MOUNTING 10 18 OPERATION 18 7 PLACEMENT 11 19 LEARN OPERATION 19 8 GENERAL OPERATION 11 20 RESTORE FACTORY SETTINGS 19 9 ADDING OPTIONAL EXTERN
1 INTRODUCTION Thank you for purchasing the JBL AURA Wall Mount Stereo which is designed to bring an extraordinary sound experience to your entertainment system. We encourage you to take a few minutes to read through this manual, which describes the product and includes step-by-step instructions for setting up and getting started. 2 WHAT’S IN THE BOX Unpack the box carefully and ensure that the following parts are included.
3 PRODUCT OVERVIEW Controls and Features 1 2 3 4 5 6 7 8 9 10 11 12 13 Reset USB 16 17 15 14 AUX 1 HDMI IN 18 Connectors 19 20 21 22 23 24 25 26 SPEAKER WIRE SOCKET ORANGE/BLACK-A LEFT- ANTENNA AUX 2 HDMI OUT (ARC) OPTICAL IN ORANGE-A LEFT+ VIOLET/BLACK-C RIGHTVIOLET-C RIGHT+ BLUE-A RIGHT+ BLUE/BLACK-A RIGHTBLACK-POWER GND EXTERNAL SUBWOOFER GREEN/BLACK-C LEFTEXT IR R L REM OUT GREEN-C LEFT + RED-POWER IN 12V+ 15A FUSE WHITE-B LEFT+ GRAY/BLACK-B RIGHTGRAY-B RIGHT +
4 SPEAKER/POWER WIRE SOCKET DIAGRAM ORANGE/BLACK-A LEFTORANGE-A LEFT+ VIOLET/BLACK-C RIGHTVIOLET-C RIGHT+ BLUE-A RIGHT+ BLUE/BLACK-A RIGHTBLACK-POWER GND GREEN/BLACK-C LEFTGREEN-C LEFT + RED-POWER IN 12V+ 15A FUSE WHITE-B LEFT+ GRAY/BLACK-B RIGHTGRAY-B RIGHT + WHITE/BLACK-B LEFT- SPEAKER (6X4-ohms) WIRING COLOR CODE GUIDE 12V DC Power Extension CAUTION! Connecting the speakers incorrectly will cause distortion and damage the power amplifier.
5 REMOTE CONTROL 14 1 1. Power Button 2. Previous Button 15 3. Play/Pause,Memory/Preset/ Preset Play Button 4. Pair Button 16 2 3 6. Zone B Button 17 18 5 9. FM Button 10. AUX 1 Button 11. USB Button 6 12. AUX 2 Button 7 19 8 9 20 BT 13. OPT Button 14. Mute Button 15. VOL+ Button 10 USB 21 AUX 1 16. Next Button 17. VOL- Button 12 13 7. Zone A Button 8. BT Button 4 11 5. Light Effect Button OPT AUX 2 22 LEARN 18. EQ Button 19. Zone C Button 20. ARC Button 21. HDMI Button 22.
REMOTE CONTROL BATTERY INSTALLATION 1.Slide and lift the battery door. + - - 2.Install 2 (two) AAA size batteries into the battery compartment as indicated by the polarity markings. + 3.Replace the battery door. Battery Precautions: Follow these precautions when using a battery in this device: 1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment.
6 MOUNTING Fig. A 1 11 4 " 1 2 16 " 3 2 8" 5 10 8 " cut out Fig. B 3 3 4" cut out 1 2 2" 1 (Allow 5 2 " for connections) Fig. C 1. Predrill 4 mounting holes as shown in Fig.A. Select fasteners (not included) suitable for the mounting materials. 2. Cut out opening size as shown in Fig. B. 3. Attach the AURA with 4 fasteners. Push the cover gently onto the AURA and press firmly as shown in Fig. C.
7 PLACEMENT When placing the media center in any type of enclosed space, be sure to allow space around it for ventilation. If placing in a tight space without ventilation, heat generated from the unit could produce a potential heat hazard. 8 GENERAL OPERATION 1. Press the Power button on the front panel or Remote Control to power on from standby mode. 2.
9 ADDING OPTIONAL EXTERNAL POWERED SUBWOOFER REAR PANEL EXTERNAL SUBWOOFER REM OUT R Red L White White (not supplied) Red L REMOTE IN R (if equipped) NOTE: Before connecting, disconnect power to AURA and the powered subwoofer. 1. Connect the audio cable as above, connect the REM OUT wire to the subwoofer REMOTE IN wire, if equipped. 2. Power on the AURA Wall Mount Stereo. 3. Play the music as usual and set the desired volume. NOTE: Subwoofer will play with ZONE "A" only.
10 FM OPERATION BEFORE OPERATION Before operation, Insert the Antenna into the ANTENNA Jack on rear panel. Cable from FM antenna (not supplied) ANTENNA SEARCHING STATION 1. Power ON the AURA Wall Mount Stereo. 2. Press the button repeatedly until FM appears on the display. Or press FM button on the Remote Control. 3. Press and hold the or button on the Remote Control or or button on the front panel to search previous or next available FM radio station automatically.
11 USB OPERATION 1. Insert the USB device to the USB port on front of the AURA Wall Mount Stereo. 2. Power ON the unit. Reset button repeatedly until "USB" appears on the display. Or press USB button on the Remote Control. 3. Press the 4. Play the audio in the external device as usual and set the desired volume. USB AUX 1 HDMI IN USB 5. During playback: ~ Press the or or next track.
13 AUX 2 OPERATION AUX 2 R Red L R L White Red White (not supplied) 1. Plug one end of the audio cable into the AUX 2 jack(L&R) on the rear of AURA Wall Mount Stereo. 2. Plug the other end of the audio cable into the LINE OUT jack(L&R) on TV, DVD Player etc. 3. Power ON the unit. 4. Press the button repeatedly until "AUX 2" appears on the display. Or press AUX 2 button on the Remote Control. 5. Play the audio in the external device as usual and set the desired volume.
15 HDMI IN AND HDMI OUT HDMI IN (not supplied) Rear Panel (not supplied) HDMI OUT (ARC) Reset Front Panel USB AUX 1 HDMI IN HDMI OUT Any HDMI device (like DVD, Gaming system, etc.) 1. Connect as illustrated above and power on the unit. 2. Press the button repeatedly until the "HDMI" appears on display. Or press HDMI button on the Remote Control. 3. Play any HDMI device. Video will appear on TV and audio through the AURA.
16 HDMI OUT (ARC) ONLY HDMI IN (not supplied) Rear Panel HDMI OUT (ARC) NOTE: Before connecting, please disconnect power. 1. Connect as illustrated above and power on the unit. 2. Press the ARC button on remote control or press the appears on display. button on unit repeatedly until " ARC " 3. Connect the video devices to the TV as usual. The audio will play through the AURA Wall Mount Stereo. NOTE: The TV must have the ARC capability, and connected to HDMI ARC jack on the capable TV.
17 BLUETOOTH OPERATION 1. Power ON the unit. 2. Press the button repeatedly until "BT" appears on display and blinks. Or press BT button on Remote Control. 3. Turn on the Bluetooth compatible device and enter pairing mode. When the Bluetooth device finds the AURA, "JBL AURA" will appear on the display of the device. 4. After successfully pairing and connecting, the "BT" on display will stop blinking. 5. During playback: ~ Press the next track.
LEARN OPERATION Control the AURA with another Remote Control (Available only for the Power, Volume Up, Volume Down and Mute functions.) 1. Power ON the unit. 2. Press and hold the LEARN button on the Remote Control for 2 seconds and release. "LEARN" appears on the display. 3. Press the button on the AURA Remote Control. "POWER" flashes on the display. Press the Power button on your other remote control and "POWER" disappears from the display. 4. Repeat Step 3 for Volume+, Vol- and functions. 5.
21 TROUBLESHOOTING 22 PRODUCT SPECIFICATIONS Never try to repair the product yourself. If you have problems using this product, check the following before you request services. General specification: System The AURA will not turn on. • Check for properly connected power. • • Power supply: 10 -14V,15A Total speaker power output (Max.@THD 10%): 120W • Output power (Max.@THD 10%):6x20W USB specification: USB rating:DC5V/1A • Supporting file format:mp3 The AURA has no response to button pressing.
