Quick Start Guide

In-Wall
Loudspeaker
Package Contents
In-Wall Speaker Placement
1x SCL-6 or 1x SCL-7
QUICK START GUIDE
Left, Center and Right Placement Note: Speaker should be mounted with the horizontal center axis aligned as close as possible.
Perforated projection screen
Specications SCL-6 SCL-7
Type: 2.5-way In-Ceiling loudspeaker
Low Frequency Driver: Quad 5.25" (130 mm) Black
Anodized Aluminum cone woofer
(JW130Al-4)
Dual 5.25" (130 mm) Black
Anodized Aluminum cone woofer
(JW130Al-8)
High Frequency Driver: 1" (25 mm) 2401H-2 annular
ring, Teonex
®
diaphragm
compresion driver
1" (25 mm) 2401H-2 annular
ring, Teonex
®
diaphragm
compresion driver
Recommended Amplier Power: 25 - 200 W RMS 25 - 150 W RMS
Impedance: 4 Ohm 4 Ohm
Loudspeaker Sensitivity: 91 dB/2.83 V/1 m 88 dB/2.83 V/1 m
Frequency Response: 50 Hz-30 kHz (-6 dB on-axis),
2pi anechoic
55 Hz-30 kHz (-6 dB on-axis),
2pi anechoic
Crossover Frequency: 1.8 kHz 2.0 kHz
High Frequency Coverage Angle
(-6 dB):
80° Ver X 80° Hor from 2 kHz to
17 kHz
60° Ver, 90° Hor (Left: 30°,
Right: 60°, from center line),
from 2 kHz to 15 kHz
Enclosure Type: Open back
Controls: Boundary Proximity Control
Grille Dimensions: 7.28" (185 mm) X 31.34"
(796 mm) X 0.25" (6.2 mm)
7.32" (186 mm) X 19.14"
(486 mm) X 0.25" (6.2 mm)
Product Dimensions (with grille): 7.29" (185 mm) X 31.32"
(796 mm) X 3.82" (97.1 mm)
7.32" (186 mm) X 19.15"
(486 mm) X 3.88" (99 mm)
Cut-out Diameter: 30.18" (766 mm) x 6.18"
(157 mm)
18.03" (458 mm) x 6.18"
(157 mm)
Mounting Depth: 3.82" (97 mm) 3.82" (97 mm)
Input Type Dual gold-plated spring-loaded binding posts
Product Weight: 22.2 lbs (10.07 kg) 12.6 lbs (5.72 kg)
Shipping Weight: 25.6 lbs (11.61 kg) 14.6 lbs ( 6.62 kg)
Shipping Units of Measure: Each
Warranty: 5 Years
Quick
Start
Guide
1x Quick Start Guide
1x Square Grille 1x Template 1x Scrim Cloth
L
C
R
LEFT
SIDE
RIGHT
SIDE
LEFT
SIDE
RIGHT
SIDE
L
C
R
LEFT
SIDE
RIGHT
SIDE
Center Axis
JBL SCL-6 / SCL-7
Grille
Template
EN