Specification Sheet

JBL SCL-8
2-Way 5.25-inch (130mm) In-Ceiling Loudspeaker
Highlights:
• 2-way in-ceiling loudspeaker system designed for off-axis
listening as height, in-ceiling LCR and surround channels
• Features 1-inch 2410H-2 compression driver tweeter
mated to a JBL patented offset High-Definition Imaging
(HDI
™
) horn assembly, angled toward listening area
• Complemented with a 5.25-inch (130mm) advanced
aluminum matrix cone, cast frame woofer with waveguide
baffle, angled to match HDI horn
• Patented Cat Claw mounting mechanism for faster
installations
• Gold plated, spring-loaded binding posts
• Comes with paintable zero-bezel, magnetically attached
round and square grilles
• Compatible with CB8 pre-construction bracket
General Specifications:
Type: 2-way in-ceiling loudspeaker
Low Frequency Driver: 5.25" (130mm) advanced Aluminum Matrix cone
cast-frame woofer (JW130Al-4)
High Frequency Driver: 1" (25mm) 2410H-2 Teonex
®
annular
ring-diaphragm compression driver
Recommended Amplifier Power: 25 – 100W RMS
Impedance: 4 Ohm
Loudspeaker Sensitivity: 85dB/2.83V/1m
Frequency Response: 55Hz – 30kHz (-6dB on-axis), 2pi anechoic
Crossover Frequency: 1.8kHz
High Frequency Coverage Angle (-6dB): 60° Vertical (Up: 30°, Down: 30°,
from 45° Vertical Center line), 120° Horizontal, from 2kHz to 10kHz
Enclosure Type: Open back
Controls: Boundary Proximity Control
Grille Dimensions: Round: 10.77" (273mm) Diameter;
Square: 10.77" (273mm) x 10.77" (273mm)
Product Dimensions (with grille): 10.77" H x 10.77" W x 4.73" D
(273mm x 273mm x 120mm)
Cut-out Diameter: 9.49" (241mm)
Accessory Rough-in Bracket: CB8
Mounting Depth: 4.54" (115mm)
Input Type: Gold-plated spring-loaded binding posts
Product Weight: 7.8 lb. (3.5kg)
Shipping Weight: 10.6 lb. (4.8kg)
Shipping Units of Measure: Each
Warranty: 5 Years