Brochure

JBL premium Transducers
2000 W highly ecient Crown Amplication
Full User Congurable DSP
Maximum SPL Output: 137dB
System Type: Self powered 15”, three-way, bass-reex
Frequency Range (-10dB): 33Hz - 21kHz
Frequency Response (- 3dB): 41Hz - 20kHz
Coverage Pattern: 60 x 40
Network Control
JBL Engineered Application Presets
LCD Screen and glow in the dark ink on back panel
M10 Suspension Points
Standard 36mm pole cup
Lightweight poplar plywood cabinets made
structurally sound with tongue and groove joints and
protected by JBL’s tour proven DuraFlex™ nish
System:
System Type: Self powered 15”, three-way, bass-reex
Maximum SPL Output: 137 dB
Frequency Range (-10 dB): 33Hz – 21kHz
Frequency Response (-3 dB): 41Hz – 20kHz
Amplier:
System Power Rating: 2000W Peak, 1500W Continuous
Input Impedance: 40k balanced, 20k unbalanced
Line Input Gain: 21 dB
Consumer Input Gain: 33 dB
Mic Input Gain: 45 dB
Maximum Input Level:
Line: 20dBu
Consumer: 8dBu
Mic: -4dBu
Connectors: Neutrik ¼ - XLR input; Neutrik XLR Output
LED Indicators: Power LED (Green) Network Link (Green) Network Data (Yellow)
Cooling: On-Demand variable speed fan
AC Power Input: 100V - 240V~ 50/60 Hz
AC Power Consumption (120V~): 2.2A (1/8th Power), 5.6A (1/3rd Power)
Speaker:
LF Driver: 2275F
MF Driver: 2107H
HF Driver: 2432H
Coverage Pattern: 60 x 40
Crossover Frequency: 330Hz & 2.4kHz
Enclosure:
Material: 18mm plywood
Monitor Angle: Ye s
Suspension/Mounting: Single 36mm pole socket, 12 x M10 Suspension points
Handles: 2
Finish: Obsidian Duraex™ nish
Grille: Powder coated, Onsidian, 14-gauge perforated steel with acoustically
transparent black cloth backing
Dimensions (L x W x H): 18.74” x 21.4” x 38.74”
(476mm x 544mm x 984mm)
Weight: 85.0 lbs (38.6 kg)
Shipping Weight: 97.0 lbs (44.0 kg)
Specications:
Applications:
e SRX835P is a powered portable PA speaker in
the SRX800 series from JBL Professional. It has been
designed to deliver class leading performance in a variety of
applications including use as a main PA, and rear and side
lls. When used in conjunction with the other SRX800 full
range systems and the SRX800 subs, SRX835P in an integral
part of a high performance, fully congurable loudspeaker
system.
e SRX835P features premium JBL Transducers. High
frequencies are handled by an annular polymer diaphragm
compression driver that features a best in class 3” voice
coil coupled to a 1.5” throat opening. Using a neodymium
magnet, the compression driver is lightweight, ecient, and
extremely powerful. is delivers very high power levels
with reduced distortion and increased phase coherence
resulting in smooth, crystal clear high frequencies. For Low
Frequencies, the SRX835P uses a 15-inch woofer with JBL’s
patented Dierential Drive Technology for reduced weight
while maximizing power amp eciency. 3” voice coils and
dual ferrite drivers deliver exceptionally low distortion and
extended low frequency response.
Finally, the SRX835’s midrange driver is derived from the
midrange transducer on the VTX 20 touring line array
system. e outside cast aluminum frame acts as the
structural support, acoustic cavity, and heat sink for the
driver, optimizing both space in the speaker cabinet and the
performance of the system at the same time.
e SRX835P features a full suite of onboard user
congurable DSP including 20 PEQ’s, 2 seconds of delay,
signal generators, input mixing, amplier monitoring, and
50 slots for recallable presets, including 6 JBL-engineered
application presets. In addition, the system is compatible
with V5 JBL Tunings, and features 96kHz FIR Filters,
and LevelMax™ Limiting providing compatibility with our
agship Vertec and VTX touring systems.
System control and networking is provided by Audio
Architect, and a standalone application for iOS and
Android. Simple wired control is provided via an Ethercon
connector on the back of the system and wireless control is
possible using a standard o the shelf wireless router.
Key Features:
15” Three-Way Bass Reflex Self Powered System
SRX835P