JBL Stage A6002/A6004/A9004/A3001 DC Owner•s Manual m.. JBL Stage A60021A6004/A9004/A3001 Bedienungsanleitung - JBL Stage A6002/A6004/A9004/A3001 pyKOBOACTBO nonb30BaTen.A ~ JBL Stage A6002/A6004/A9004/A3001 Bruksanvisning ~ JBL Stage A6002/A6004/A9004/A3001 Mode o•emploi JBL Stage A6002/A6004/A9004/A3001 Manual de Propietario JBL Stage A6002/A6004/A9004/A3001 Manual do Proprietario JBL Stage A6002/A6004/A9004/A3001 Manuale Utente a .. a..
THANK YOU FOR YOUR PURCHASE ... Your JBL product has been designed to provide you with the performance and ease of operation you would expect from JBL. • Please take time to read your owner's manual in its entirety before operating or installing your amplifier. • Keep the owner's manual for your amplifier in your glove compartment along wnh the owner's manual for your car. • Put your amplifier sales receipt with other important documents in order to expedne warranty service if needed.
+12 volt Remote Groond Precautions: t tt IMPORTANT: Disconnect the vehicle's negative(-) battery terminal before beginning the installation. • />Jways wear protective eyewear when using tools. • Choose a safe mounting location, away from moisture. Check clearances on both sides of a planned mounting surface. Be sure that screws or wires will not puncture brake lines, fuel lines, or wiring harnesses and that wire routing will not interfere with the safe vehicle operation.
@ ~WER ~ c:::=::> @ c:::=::> c:::=::> ~~.Dl@ Stage A6004 and A9004 • The Stage A6004 and A9004 feature Channel1 +/-, Channel2 +1-, Channel3 +1-, and Channel4 +1- terminals. • 4-channel operation: Connect the front left speaker to the Channel 1 + and - terminals, and the front right speaker to the Channel 2 + and terminals. Connect the rear left speaker to the Channel 3 + and - terminals, and the rear right speaker to the Chanel 4 + and • terminals.
LEVEL CHAPTER 3: OPERATIONS Setting the input levels: To match your amplifier's input sensitMty (gain) to your source unit's output level, we recommend the following procedure: A. Tum both input level controls counterclockwise to MIN {minimum). B. Play a dynamic music track through your source unit. Tum the source unit's volume control to the 3/4 position. C. Tum the front input level control dial clockwise towards MAX until you hear distortion in the music (It's no longer clear). D.
ToprosaR MapKa JBL Ha3Ha4eHIIIe rosapa ABTOM061t1flbHbl~ VbrOTOBI/ITenb XapMaH V1HTepHewHn V1HAaCTp1t13 V1HKopnope~reA, CWA, 06901 KoHHeKTit1Kyr, r.CnMopA, AmaHTit1K CTplt1T 400, olt1c 1500 fapaHTIII~Hbl~ nepiiiOA yclt1fllt1Tenb 1 rOA CrpaHa npolllcxo>tOpMa~IIIR 0 cepBIIICHbiX ~eHTpaX www.harman.
Stage Amplifiers There’s Nothing Better Than Riding With JBL JBL Stage A6002 JBL Stage A6004 JBL Stage A9004 Power you will feel at your core. JBL Stage A3001 Features JBL Stage Amps are available in a variety of configurations, delivering the right power and number of channels for full-range and subwoofer applications. For more than four decades, JBL has made the audio experience a lot more satisfying for the car audio enthusiast.
Stage Amplifiers There’s Nothing Better Than Riding With JBL JBL Stage Amplifier A3001 JBL Stage Amplifier A6002 JBL Stage Amplifier A6004 JBL Stage Amplifier A9004 Features and Benefits Value Engineered Stage amplifier provides true JBL performance at an affordable price while now lacking the features needed to properly tune and optimize performance.
Stage Amplifiers There’s Nothing Better Than Riding With JBL What’s in the Box Amplifier Spare Fuse (x2 for 1-channel and 4-channel model) Quick start guide High-level input cable (x2 for 4-channel model) 2x two-color JBL Brand Stickers Mounting hardware Mounting screws Technical Specifications: Stage A9004 Stage A6002 Operating voltage RMS power @ 4 ohms RMS power @ 2 ohms RMS bridged power @ 4 ohms Total peak power Frequency response THD + N at rated power (20Hz – 20kHz) Line-in signal-to-noise ratio (ref
