Spec Sheet
The most advanced JBL
®
residential loudspeaker systems, including Everest DD66000, K2 and Project Array,
share one key design characteristic with the massive JBL Professional systems you hear in premier movie houses
and concert venues. All employ constant-directivity compression drivers in a horn to deliver the high-impact
dynamics and dimensional realism that large audiences and critical listeners demand. Now JBL Studio 5 Series
speakers, designed by renowned JBL chief engineer Greg Timbers, continue this performance-proven tradition.
The JBL Studio 530 bookshelf loudspeaker combines a 1-inch (25mm) HF compression driver and Bi-Radial
®
horn with 5-1/4-inch (130mm) cast-frame Symmetrical Field Geometry (SFG) woofer to deliver extraordinarily
lifelike performance. Ideal for both music and movie systems, the Studio 530 system is powerful, accurate and
styled to make a dramatic design statement in any listening environment.
5-1/4" Bookshelf Loudspeaker with High-Frequency
Compression Driver in a Horn and Classic JBL
®
Bass
JBL Studio 530
TECHNICAL SPECIFICATIONS
Low-frequency transducer: 5-1/4" (130mm) PolyPlas
™
cone with SFG magnet structure,
cast frame and rubber surround, magnetically shielded
High-frequency transducer: 1" (25mm) compression driver with neodymium magnet
and one-piece Teonex
®
diaphragm on a glass-lled ABS
Bi-Radial
®
horn, magnetically shielded
Recommended amplier power: 125 watts
Frequency response: 45Hz – 40kHz (–6dB)
Nominal impedance: 6 ohms
Sensitivity (2.83V/1m): 86dB
Crossover frequencies: 1.5kHz
Enclosure type: Ported
Connector type: Dual gold-plated binding posts (bi-wire-capable)
Available nish: Black
Dimensions (H x W x D): 18-3/8" x 8-7/16" x 8-3/4" (467mm x 214mm x 222mm)
Weight: 17 lb (7.7kg)
Finish: