Cables C20 through C21
Cables for Gateway 20 through 21 File Name: Revision Date: Revision Level: PAGE 1 cable_c20_c21.doc March 23, 2006 1.0 FCC Notice Warning: This equipment generates, uses, and can radiate radio frequency energy; and if not installed and used in accordance with the instruction manual, may cause interference to radio communications.
Cables for Gateway 20 through 21 PAGE 2 C20 –C21 Port Cable Description Cable Order Number Table 9F to 9M DCE Cable 6foot 9F to 25M DCE Cable 6foot 9F to 9F Straight Gender Changer 25F to 25F Straight Gender Changer C/9SF-9M-DCE-6’ C/9SF-25M-DCE-6’ C/9FF-XGENDER C/25FF-XGENDER Pg. 3 Pg. 3 Pg. 4 Pg. 4 RJ-45 Straight RJ-45 Crossed N/A C/CAT5-CROSS Pg. 5 Pg. 5 RJ-11 Straight N/A Pg. 6 Serial DE-9M RS232 DTE async (Comport) LAN RJ-45 Ethernet Modem RJ-11 Dial-Tone async © JBM Electronics Co.
Cables for Gateway 20 through 21 PAGE 3 9F to 9M/F (DCE) This table lists the required RS-232 wiring required to provide a DCE interface for a Gateway Comm. Port. The pins should be connected from one connector to the other using the transpositions indicated. This cable is used for modem emulation.
Cables for Gateway 20 through 21 PAGE 4 25F to 25F Gender Changer This is used to change a 9-pin male end connector to female. Units Supported • C20 JBM Electronics Part Number: C/9FF-XGENDER 25F to 25F Gender Changer This is used to change a 25-pin male end connector to female. Units Supported • C20 JBM Electronics Part Number: C/25-XGENDER © JBM Electronics Co. 1-800-489-7781 www.jbmelectronics.
Cables for Gateway 20 through 21 PAGE 5 RJ-45 Straight This table lists the Ethernet pins used in the Ethernet Port ETH0. For a straight-wired connection the pins should be connected from one connector to the other without transpositions or other wiring changes.
Cables for Gateway 20 through 21 PAGE 6 RJ-11 Straight This table lists the required pins used in the Modem cable used to connect the Gateways to an asynchronous modem. Pins should be connected from one RJ-11 connector to the other without transpositions or other wiring changes. RJ-11 MODEM CABLE PIN DESCRIPTION 1 Unused 2 Tip 4 Ring 5 Unused Used for connecting a modem to the C21 Units Supported • C21 JBM Electronics Part Number: N/A © JBM Electronics Co. 1-800-489-7781 www.jbmelectronics.