User Guide

ManualsBrandsJDS Uniphase ManualsOtherMTS-8000

ACTERNA TEST & MEASUREMENT SOLUTIONS

WEBSITE: www.jdsu.com/ﬁberoptictest

Transport Module

• All in one module for

Full PDH/T-Carrier & SDH/SONET test-

ing up to 10 Gb/s

Ethernet testing 10/100/1GigE/

10GigE LAN & WAN up to the IP layer

Dispersion Modules

• PMD – Polarization Mode Dispersion

• CD – Chromatic Dispersion

MTS-8000 Portable Optical Network Tester

All your optical network testing needs covered in a single platform

The power of one, performing

the work of many

A powerful unit

• Flexible scalable platform

• Industry-leading size and weight, e.g. plat-

form + transport module < 7 kg

• Interchangeable modules

• Generates test results in seconds

• Fully automatic testing

• Combination of several tests

• Remotely controlled (via Ethernet, Fiber)

Fiber Characterization Testing

• Optical Time Domain Reﬂectometer

(OTDR)

• Chromatic Dispersion (CD)

• Polarization Mode Dispersion (PMD)

• Attenuation Proﬁle (AP)

• Loss testing

CWDM/DWDM Testing

• OSA with frequency range from 1250 nm to

1650 nm

• DWDM parameters OSNR, optical channel

power, wavelength deviation

• Application for EDFA and DFB testing

• Channel isolation for BER analysis

• Single or dual port analyzer

Ampliﬁed DWDM system analysis

Pass/Fail OTDR analysis

OTDR Module

• More than 20 OTDR modules

• Combined wavelengths MM: 850/1300

SM: 1310/1383/1550/1625 nm

• Dynamic range 30 dB up to 50 dB

Summary of content (4 pages)

PAGE 1
ACTERNA TEST & MEASUREMENT SOLUTIONS MTS-8000 Portable Optical Network Tester All your optical network testing needs covered in a single platform The power of one, performing the work of many A powerful unit • Flexible scalable platform • Industry-leading size and weight, e.g.
PAGE 2
MTS-8000 Tester 2 Fiber Characterization Automatic bi-directional measurement function • • • • • Built-in Optical Talkset • Data transfer capability: ﬁle exchange or remote control • Used also for fully automatic bi-directional measurements • OTS-55 handheld for far end communication Automate the acquisition process Check ﬁber continuity File transfer through the ﬁber True splice loss with both end analysis Optical talkset option needed Data Tested fiber Remote Bi-directional OTDR analysis PC softwar
PAGE 3
MTS-8000 Tester 3 Transport Conﬁguration Secondary Port Bank • 10/100/1000 Mb/s Ethernet • 1 GigE Tx/Rx (850 nm, 1310 nm, 1550 nm) Primary Port Bank • 2.
PAGE 4
MTS-8000 Tester Connector Inspection Scope • • • • • Fiber Connector Inspection Connectors Patch panel inspection 250 or 400 magniﬁcation Uses MTS-8000 large screen (10.