User`s guide
12
Headset
The included headset can be utilized when
a hands-free operation is preferred. Plug
the headset into the receptacle located at
the base of the unit next to the modular
plug receptacle. The headset can be used
for either ear by rotating the microphone
position 90 degrees.
NOTE: When the headset is plugged in, the
internal handset is disconnected.
Belt Clip Attachment
To install the Belt Clip Attachment, remove
the strain relief attahment screw and position
the Belt Clip as shown. Attach the clip using
the provided 3/8" flat head screw. Take
care not to over torque the screw to cause
damage to the body.
Strain Relief
Grommet
Belt clip