User Manual

4
LIST OF PACKAGED CONTENTS
PRODUCT FEATURES
FEATURES
2. One receiver
1. One transmitter
3. One power adapter
(output : 9V 200mA)
Transmitter
1. Channel selection button
1. Right audio input (white)
2. Left audio input (red)
3. Earphone output
4 Channel selection button
. Power input (9V 200mA)
.
5
Receiver
1
WIRELESS
AUDIO SENDER
RECEIVER
USB STEREO AUDIO SENDER
1. Super high frequency for wireless stereo digital audio sender.
2. Transmitter is USB connector, it can be plugged into an USB port of MP3
player using Windows 2000 or above system.
3. High frequency can prevent interference and provides best audio quality.
4. Receiver converts the received digital signal into analog and outputs the
signal to speakers or broadcast speakers.
5. Can be installed easily.
music
analog
USB STEREO AUDIO SENDER
2. Transmitter is USB connector, it can be plugged into an USB port
of MP3 music player using Windows 2000 and above systems.
3. There is no sound from horn or earphone of receiver, try to check
if the LED on USB connector is flashing, if not, please re-plug
USB connector to play songs.
4. The AC adapter, which comes with this system, should not be
plugged into the same outlet with other appliances to reduce
interference probability.
Federal Communication Commission
Interference Statement
1
WIRELESS
AUDIO SENDER
RECEIVER
4
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth fo
r an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter
IMPORTANT NOTE:
1
2
3
5