Instructions / Assembly

Assembly Instructions

• This fire bowl is intended for outdoor use only.

WARNINGS:

Do not

• This fire bowl is intended to burn wood logs only. Do not burn coal, leaves, or other combustible

materials in the bowl.

use on wooden decks.

• Not for use by children. Keep children and pets away from this fire bowl.

• The fire bowl is hot. Use with caution. Do not touch the hot fire bowl with bare hands.

• Never leave the burning fire bowl unattended, and always extinguish the fire completely before leaving

the fire bowl.

• Do not use near flammable or combustible objects or materials.

• When the fire bowl is in use, the handle on the mesh screen can reach extreme temperatures that can

cause serious injury to an unprotected hand. Use a poker or an appropriate heat resistant glove or pad

when handling.

• DO NOT use this fire bowl as a cooking appliance. This fire bowl is not designed for grilling food.

• Check local fire regulations and municipal by-laws for safe use.

• Read all safety guidelines, warnings, instructions, and operating rules carefully before assembling and

using this product.

• Some parts may contain sharp edges—especially as noted in the manual. Wear protective gloves if

necessary.

PARTS LIST

HARDWARE LIST

Note: You will need a screwdriver to help with the assembly.

1/2

Qty No Parts

1 piece B Mesh Screen

1 piece C Fire Grate

1 piece D

Fire Bowl

4 pieces E Leg

1 piece F Ring

1 piece G Poker

Qty No Parts

1 Set A+AA Screen Handle with Nut

4 BB M6 * 20 Bolt

8 CC M6 * 10 Bolt

PAGE 1
Assembly Instructions WARNINGS: • This fire bowl is intended for outdoor use only. Do not use on wooden decks. • This fire bowl is intended to burn wood logs only. Do not burn coal, leaves, or other combustible materials in the bowl. • Not for use by children. Keep children and pets away from this fire bowl. • The fire bowl is hot. Use with caution. Do not touch the hot fire bowl with bare hands.
PAGE 2
Step By Step Assembly Instructions: Step1: Insert Screen Handle (A) into hole in Mesh Screen (B) and tighten it with Nut (AA) underside to secure. Step2: Attach the ring(.F) to the assembled legs(E) by M6*20 Bolt (BB).Please tighten all the bolts. Step3: Attach the four legs (E) to the fire bowl (D) by M6*10 Bolt (CC). Please DO NOT tighten the bolts at this time.