User Manual

c. Lay the soft top back into the vehicle with the

curved portion of the bows facing upward.

d. Tap the knuckleson the side with a rubber mallet

to reattach them to the pivot bracket.

e. Screw the pivot screws back into place. Secure

them until they are snug being careful not to cross-

thread the screws.

CAUTION!

Do not overtighten the screws. You can strip the

screws if they are overtightened.

5. Unsnap and remove the black boot cover. This cover

should be discarded. It was intended as a protective

cover for shipping only.

NOTE:

Avisual instruction sheet is enclosed in the dual

top wrap.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 69