TABLE OF CONTENTS SECTION PAGE .............................................................3 1 1 INTRODUCTION 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4 INSTRUMENT PANEL AND CONTROLS 5 STARTING AND OPERATING 6 WHAT TO DO IN EMERGENCIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .383 6 7 MAINTAINING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS m Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 m Warnings And Cautions . . . . . . . . . . . . . . . . . . . 7 m Rollover Warning . . . . . . . . . . . . . . . . . . . . . . . . 4 m Vehicle Identification Number . . . . . . . . . . . . . . . 7 m How To Use This Manual . . . . . . . . . . . . . . . . . . 5 m Vehicle Modifications / Alterations . . . . . . . . . . .
INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer oriented documents. You are urged to read these publications carefully. Following the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
INTRODUCTION 5 belts could cut the highway death toll by 10,000 or more each year, and could reduce disabling injuries by 2 million annually. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Always buckle up. HOW TO USE THIS MANUAL Consult the table of contents to determine which section contains the information you desire. The detailed index, at the rear of this manual, contains a complete listing of all subjects.
INTRODUCTION
INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures, which could result in an accident or bodily injury. It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The vehicle identification number (VIN) is found on the left front corner of the instrument panel.
INTRODUCTION VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS m A Word About Your Keys . . . . . . . . . . . . . . . . . .12 ▫ To Release The Steering Wheel Lock . . . . . . . . .18 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . .12 m Security Alarm System — If Equipped . . . . . . . . .18 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .14 ▫ Rearming Of The System . . . . . . . . . . . . . . . . .19 m Sentry Key . . . . . . . . . . . . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Unlatch The Liftgate Flip-Up Window . . . . .24 ▫ Power Windows . . . . . . . . . . . . . . . . . . . . . . .36 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . .24 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . .39 ▫ Programming Additional Transmitters . . . . . . . .25 m Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 ▫ Battery Replacement . . . . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag . . . . . . . . . . . .52 ▫ Child Restraint . . . . . . . . . . . . . . . . . . . . . . . .69 m Engine Break-In Recommendations . . . . . . . . . . .79 m Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 ▫ Transporting Passengers . . . . . . . . . . . . . . . . .79 11 ▫ Lock Your Vehicle . . . . . . . . . . . . . . . . . . . . . .80 ▫ Exhaust Gas . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS You can insert the double-sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer. Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal Automatic Transmission Place the selector lever in “P” (Park).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: • For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), features such as the power window switches, radio, power sunroof or Sky Slidert (if equipped), and power outlets will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle. CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition, and lock all doors when leaving the vehicle unattended.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 the vehicle. The system will shut the engine off in two (2) seconds if someone uses an invalid key to start the engine. longer than 10 seconds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible. NOTE: A key, which has not been programmed, is also considered an invalid key even if it is cut to fit the ignition switch lock cylinder for that vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Replacement Keys NOTE: Only keys that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a Sentry Key is programmed to a vehicle, it cannot be programmed to any other vehicle. NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to the dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE addition, the Vehicle Security Alarm Indicator Light will begin to flash. Turn the ignition switch to the “LOCK” position and remove the second key. 4. Insert a blank Sentry Key into the ignition switch. Turn the ignition switch to the “ON” position within 60 seconds. After 10 seconds, a single chime will sound. In addition, the Vehicle Security Alarm Indicator Light will stop flashing.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE STEERING WHEEL LOCK — IF EQUIPPED Your vehicle may be equipped with a passive steering wheel lock (manual transmission only). This lock prevents steering the vehicle without the ignition key. If the steering wheel is moved a half turn in either direction and the key is not in the ignition, the steering wheel will lock.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Rearming of the System: If something triggers the alarm, and no action is taken to disarm it, the system will turn off the horn after 3 minutes, turn off all of the visual signals after 15 minutes, and then the system will rearm itself. To Arm the System: 1. Remove the key from the ignition switch and exit the vehicle. 2. Lock the doors and liftgate by pressing the power door lock switch or the Lock button on the Remote Keyless Entry (RKE) transmitter.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Security Alarm System is designed to protect your vehicle; however, you can create conditions where the system will give you a false alarm. If the previously described arming sequence has occurred, the system will arm regardless of whether you are inside or outside the vehicle. If you remain inside the vehicle and open a door, the alarm will sound. If this occurs, disarm the system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Inserting the key into the ignition switch disables all buttons on the transmitter. 21 Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either the driver’s door or all doors and the liftgate on the first press of the Unlock button on the transmitter.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Test the feature from outside the vehicle by pressing the Lock and Unlock buttons on the transmitter. 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the Lock button on the transmitter while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the Unlock button to deactivate the Security Alarm.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the following steps: 1. Press the Lock button on a programmed (i.e. functional) transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press the Panic button while still holding the Lock button. 2. Release both buttons at the same time. 3. Test the feature from outside the vehicle by pressing the Lock button on the transmitter. 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Release both buttons at the same time. 3. Test the feature from outside the vehicle by pressing the Lock and Unlock buttons on the transmitter. 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the Lock button on the transmitter while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 headlights and turn signal lights will flash, the horn will pulse on and off, and the illuminated entry system will turn on. Programming Additional Transmitters Refer to SENTRY KEY “Customer Key Programming.” in this section. The panic alarm will stay on for 3 minutes unless you turn it off by pressing the Panic button a second time or if the vehicle speed is 5 mph (8 km/h) or greater.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. With the transmitter buttons facing down, use a flat blade tool to pry the two halves of the transmitter case apart. Make sure not to damage the seal during removal. 3. Remove and replace the batteries. Avoid touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 4. To assemble the transmitter case, snap the two halves together. 5.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2 If your Keyless Entry Transmitter fails to operate from a normal distance, check for these two conditions. 1. Weak batteries in transmitter. The expected life of the batteries is from one to two years. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Use Remote Start All of the following conditions must be met before the engine will remote start: • Gear selector lever in “P” (Park). • Doors closed. • Hood closed. • Liftgate closed. • Hazard switch off. • Brake switch inactive (brake pedal not pressed). • Ignition key removed from ignition switch. • Battery at an acceptable charge level. • RKE Panic button not pressed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Exit Remote Start Mode & Drive the Vehicle Before the end of the 15-minute cycle, press and release the Unlock button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if equipped). Then, insert the key into the ignition switch and turn the switch to the ON position. 29 DOOR LOCKS Manual Door Locks To lock each door, push the door lock plunger on each door trim panel downward.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the door lock plunger is down when you shut the door, the door will lock. Therefore, make sure the keys are not inside the vehicle before closing the door. NOTE: The manual door locks will not lock or unlock the liftgate. WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors and liftgate. 31 locks will not operate. This prevents you from accidentally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if the key is in the ignition switch and a door is open, as a reminder to remove the key.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Door Locks Programming The Automatic Door Locks feature can be enabled or disabled as follows: • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to “Personal Settings (Customer Programmable Features)” under “Electronic Vehicle Information Center (EVIC)” in Section 4 of this manual for details. • For vehicles not equipped with the EVIC, performing the following procedure: 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. The doors were not previously unlocked. 6. The vehicle speed is 0 mph (0 km/h). Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to “Personal Settings (Customer Programmable Features)” under “Electronic Vehicle Information Center (EVIC)” in Section 4 of this manual for details. 33 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Insert the tip of the ignition key into the child lock control and rotate it to the lock position. NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window, and open the door with the outside door handle. 2 To Disengage the Child Protection Door Lock 1. Open the rear door. 2. Insert the tip of the ignition key into the child lock control and rotate it to the unlock position. Inserting Ignition Key 3. Repeat Steps 1 and 2 on the opposite rear door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Windows The window controls on the driver’s door trim panel control all the door windows. There are single window controls on each passenger door trim panel, which operate the passenger door windows. The window controls will operate when the ignition switch is in the ON or ACC position. WARNING! Never leave children in a vehicle, with the keys in the ignition switch.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To open the window part way, press the window switch to the first detent and release it when you want the window to stop. To stop the window from going all the way down during the auto-down operation, pull up on the switch briefly. For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition switch is turned to the LOCK position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time is programmable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open. Window Lockout Switch Reset It may be necessary at some point in time to reactivate the auto-up feature. To do so, perform the following procedure: 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE To open the liftgate, pull up (squeeze) on the handle and lift. NOTE: Use the power door lock switch on either front door trim panel or the Remote Keyless Entry (RKE) transmitter to lock and unlock the liftgate. The manual door locks on the doors and the driver’s door lock cylinder will not lock and unlock the liftgate. WARNING! Driving with the liftgate open can allow poisonous exhaust gases into your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems. These include the front and rear seat belts for the driver and all passengers, front airbags for both the driver and front passenger, and side curtain airbags for the driver and passengers seated next to a window. If you will be carrying children too small for adult-size belts, your seat belts also can be used to hold infant and child restraint systems.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE inside of the vehicle. Everyone in a motor vehicle should be belted at all times to reduce or prevent injuries. Lap/Shoulder Belts All seating positions in your vehicle have combination lap/shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or collisions. This feature allows the shoulder part of the belt to move freely with you under normal conditions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. 5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retractor will withdraw any slack in the belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! Adjustable Upper Shoulder Belt Anchorage In the front seating positions, the shoulder belt can be adjusted upward or downward to position the belt away from your neck.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you will prefer a higher position. When you release the anchorage, try to move it up and down to make sure that it is locked in position. Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System (BeltAlert) If the driver’s or front passenger’s seat belt has not been buckled within 60 seconds of starting the vehicle, and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced Warning System (BeltAlert) will alert the driver or front passenger to buckle their seat belt. The driver should also instruct all other occupants to buckle their seat belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 3. Within 60 seconds of turning the ignition switch to the ON position, unbuckle and then re-buckle the driver’s seat belt at least three times within 10 seconds, ending with the seat belt buckled. Automatic Locking Mode — If Equipped In this mode, the shoulder belt is automatically prelocked. However, the belt will still retract to remove any slack in the shoulder belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How to Disengage The Automatic Locking Mode Disconnect the combination lap/shoulder belt from the buckle and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode. Energy Management Feature This vehicle has a safety belt system with an energy management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Keep the belt low so that it does not come across the abdomen. That way the strong bones of the hips will take the force if there is a collision. Seat Belt Extender If a seat belt is too short, even when fully extended, and when the adjustable upper shoulder belt anchorage (if so equipped) is in its lowest position, your authorized dealer can provide you with a seat belt extender. This extender should be used only if the existing belt is not long enough.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s airbag is mounted in the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove compartment. The words SRS AIRBAG are embossed on the airbag covers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 The front airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity and occupant size. The front passenger airbag is also certified to the Federal regulations that define Occupant Classification (refer to information on Occupant Classification System in this section).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Do not put anything on or around the front and side curtain airbag covers or attempt to manually open them. You may damage the airbags and you could be injured because the airbags are no longer functional. These protective covers for the airbag cushions are designed to open only when the airbags are inflating. • Do not stack luggage or other cargo up high enough to block the location of the side curtain airbag.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE classified in a category other than that of an adult (refer to information on Occupant Classification System in this section). This could be a child, teenager, or even a small size adult. Here are some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years old and under should always ride buckled up in the rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Do not lean against the door or window, airbags will inflate forcefully into the space between you and the door. 5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under “If You Need Assistance” in Section 9 of this manual. WARNING! • Relying on the airbags alone could lead to more severe injuries in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) 57 • Front Passenger Seat Track Position Sensors • Occupant Classification System (OCS) — Front Passenger Seat Only • Airbag Warning Light − Occupant Classification Module (OCM) • Driver Airbag − Passenger Airbag Disable (PAD) Indicator Light • Front Passenger Airbag − Weight Sensors • Side Curtain Airbags above Side Windows How The Airbag System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The ORC also monitors the readiness of the electronic parts of the system whenever the ignition switch is in the START or ON position. These include all of the items listed above except the Passenger Airbag Disable (PAD) Indicator Light, the instrument panel, and the steering wheel and column. If the key is in the LOCK position, in the ACC position, or not in the ignition, the airbags are not on and they will not inflate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 NOTE: Children 12 years and under should always ride buckled up in a rear seat in an appropriate child restraint. • The Passenger Airbag Disable (PAD) Indicator Light (an amber light located in the center of the instrument panel) tells the driver and front passenger when the front passenger airbag is turned off.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE is turned off and it will not inflate. If the “PAD Indicator Light” is not illuminated, DO NOT assume the airbag is turned off and move the child restraint to the rear seat. A deploying passenger airbag can cause death or serious injury to a child in a rear facing infant seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE will cause the system to turn the airbag on. In this case, the OCS has classified the occupant of the seat as an adult. An adult occupant needs to sit in a normal position (with their feet on or near the floor) in order to be properly classified. Reclining the seat back too far may change how an occupant is classified by the OCS.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE lodged under the seat and interferes with operation of the weight sensors, a fault will occur which turns on both the “PAD Indicator Light” and the “Airbag Warning Light.” Once the lodged object is removed, the fault will be automatically cleared after a short period of time. driver’s front airbag gas is vented through the vent holes in the sides of the airbag. The passenger’s front airbag gas is vented through the vent holes in the sides of the airbag.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Side Impact SRS Side Curtain Airbags are designed to activate only in certain side collisions and rollover events. When the ORC detects a collision requiring the side curtain airbag to inflate, it signals the inflators on the crash side of the vehicle or both sides of the vehicle for a rollover event. A quantity of nontoxic gas is generated to inflate the side curtain airbag.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Unapproved modifications or service procedures to the front passenger seat assembly or its related components may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an accident. A modified vehicle may not comply with required Federal Motor Vehicle Safety Standards (FMVSS).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • As the airbags deflate, you may see some smoke-like particles. The particles are a normal by-product of the process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation continues, see your doctor.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Turns on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • Unlocks the doors automatically. NOTE: The interior lights can only be deactivated if the key is removed from the ignition switch or the vehicle is driven. Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Perchlorate Material – special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Airbag Warning Light You will want to have the airbag system ready to inflate for your protection in an impact. The airbag system is designed to be maintenance free.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In conjunction with other data gathered during a complete accident investigation, the electronic data may be used by DaimlerChrysler Corporation and others to learn more about the possible causes of crashes and associated injuries in order to assess and improve vehicle performance.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Data Parameters that May Be Recorded: • Transmission gear selection • Diagnostic trouble code(s) and warning light status for electronically controlled safety systems, including the airbag system • Cruise control status • Airbag disable light status (if equipped) • 9Time9 of airbag deployment (in terms of ignition cycles and vehicle mileage) • Airbag deployment level (if applicable) • Impact acceleration and angle • Seat belt status • Brake status (service an
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, an unrestrained child, even a tiny baby, can become a missile inside the vehicle. The force required to hold even an infant on your lap can become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper restraint for the child’s size.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE “LATCH — Child Seat Anchorage System (Lower Anchors and Tether for CHildren)” in this section. • Rearward-facing child seats must NEVER be used in the front seat of a vehicle with the front passenger airbag unless the airbag is turned off. An airbag deployment could cause severe injury or death to infants in this position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Check belt fit periodically. A child’s squirming or slouching can move the belt out of position. WARNING! • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some tips on getting the most out of your child restraint: • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. The manufacturer also recommends that you try a child restraint in the vehicle seats where you will use it before you buy it. • The restraint must be appropriate for your child’s weight and height. Check the label on the restraint for weight and height limits.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE connection to the top tether anchorages have been available for some time. For some older child restraints, many child restraint manufacturers offer add-on tether strap kits or retrofit kits. You are urged to take advantage of all the available attachments provided with your child restraint in any vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The rear seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seat back, and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces. 75 In addition, there are tether strap anchorages behind each rear seating position located on the back of the seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE means of adjusting the tension in the strap. Forwardfacing toddler restraints and some rear-facing infant restraints will also be equipped with a tether strap, a hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap. You will first loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE belt. However, any seat belt system may loosen with time, so check the belt occasionally, and pull it tight if necessary. If the seat belt has an automatic locking retractor, pull the belt from the retractor until there is enough to allow you to pass through the child restraint and slide the latch plate into the buckle. Then, pull the belt until it is all extracted from the retractor.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To attach a child restraint tether strap: Route the tether strap over the seat back and attach the hook to the tether anchor located on the back of the seat. For the outboard seating positions, route the tether underneath the headrest and attach the hook to the tether anchor located on the back of the seat. WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine in your new vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While cruising, brief full-throttle acceleration, within the limits of local traffic laws, contributes to a good break-in. Wide-open throttle acceleration in low gear can be detrimental and should be avoided.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a seat belt properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as required. WARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO) follow the safety tips below.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Periodic Safety Checks You Should Make Outside The Vehicle Tires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS m Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . .88 ▫ Automatic Dimming Mirror — If Equipped . . . .88 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . .89 ▫ Exterior Mirrors Folding Feature — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .90 ▫ Power Remote Control Mirrors . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE m Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 m To Open And Close The Hood . . . . . . . . . . . . . 131 ▫ Manual Front Seat Adjustments . . . . . . . . . . . 118 m Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 ▫ Power Seat — If Equipped . . . . . . . . . . . . . . . 121 ▫ Exterior & Interior Lighting Control . . . . . . . . 133 ▫ Head Restraints . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 ▫ Flash To Pass . . . . . . . . . . . . . . . . . . . . . . . . 137 ▫ To Activate . . . . . . . . . . . . . . . . . . . . . . . . . . 147 ▫ Interior Lights . . . . . . . . . . . . . . . . . . . . . . . 138 ▫ To Set At A Desired Speed . . . . . . . . . . . . . . . 148 m Windshield Wipers And Washers . . . . . . . . . . . . 140 ▫ To Deactivate . . . . . . . . . . . . . . . . . . . . . . . . 148 ▫ Intermittent Wiper System . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Using HomeLinkt . . . . . . . . . . . . . . . . . . . . . 159 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 163 ▫ Reprogramming a Single HomeLinkt Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 ▫ Sunroof Maintenance . . . . . . . . . . . . . . . . . . . 164 ▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 ▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . . 160 ▫ General Information . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 m Power Inverter — If Equipped . . . . . . . . . . . . . 170 ▫ Cargo Load Floor . . . . . . . . . . . . . . . . . . . . . 174 m Cup Holders . . . . . . . . . . . . . . . . . . . . . . . . . . 172 m Rear Window Features . . . . . . . . . . . . . . . . . . . 180 m Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 ▫ Rear Window Wiper/Washer — If Equipped . . 180 ▫ Front Storage Compartment . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rear window. A two-point pivot system allows for horizontal and vertical mirror adjustment. Manual Rearview Mirror Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle). The mirror should be adjusted while set in the day position (toward windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror. NOTE: The passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next to your vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Exterior Mirrors Folding Feature — If Equipped Some models have exterior mirrors that are hinged. The hinge allows the mirror to pivot forward and rearward to resist damage. The hinge has three detent positions, forward, rearward, and normal. Power Remote Control Mirrors The power mirror switch is located on driver’s door trim panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Models with Express Window Feature Press and release the mirror select button marked L or R and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing. The selection will time out after 30 seconds of inactivity to guard against accidentally moving a mirror position following an adjustment. Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is on each sun visor.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sun Visor “Slide-Out” Feature — If Equipped The sun visor “slide-on rod” feature allows for additional flexibility in positioning the visor to block out the sun. 1. Fold down sun visor. 2. Unclip visor from center clip. 3. Pull the sun visor toward inside rearview mirror to extend. HANDS–FREE COMMUNICATION (UConnectT) — IF EQUIPPED NOTE: The sales code RER radio contains an integrated Hands-Free Communication (UConnectt) system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE UConnectt allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s microphone for private conversation. The UConnectt phone book enables you to store up to 32 names and four numbers per name. Each language has a separate 32-name phone book accessible only in that language. This system is driven through your Bluetooth™ Hands-Free profile cellular phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE you may not be able to use any UConnectt features. Refer to your cellular service provider or the phone manufacturer for details. • Prior to giving a voice command, one must wait for the beep, which follows the 9Ready9 prompt or another prompt. The UConnectt system is fully integrated with the vehicle’s audio system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Command Tree Refer to “Voice Tree” at the end of this section. Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say 9Help9 following the beep. The UConnectt system will play all the options at any prompt if you ask for help. To activate the UConnectt system from idle, simply press the “Phone” button and follow audible prompts for directions.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can enter any four-digit pin number. You will not need to remember this pin number after the initial pairing process. • For identification purposes, you will be prompted to give the UConnectt system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • You will then be asked to give your cellular phone a priority level between 1 and 7, 1 being the highest priority.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 • The UConnectt system will confirm the phone number and then dial. The number will appear in the display of certain radios. • The UConnectt system will confirm the name and then dial the corresponding phone number, which may appear in the display of certain radios. Call by Saying a Name Add Names to Your UConnectt Phonebook • Press the “Phone” button to begin. NOTE: Adding names to phone book is recommended when vehicle is not in motion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, recite the phone number for the phone book entry that you are adding. After you are finished adding an entry into the phone book, you will be given the opportunity to add more phone numbers to the current entry or to return to the main menu. The UConnectt system will allow you to enter up to 32 names in the phone book with each name having up to four associated phone numbers and designations.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Edit Entries in the UConnectt Phonebook NOTE: Editing names in the phone book is recommended when vehicle is not in motion. • Press the “Phone” button to begin. • After the 9Ready9 prompt and the following beep, say 9Phonebook Edit.9 • You will then be asked for the name of the phone book entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or pager) that you wish to edit.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE from the list, press the 9Voice Recognition9 button while the UConnectt system is playing the desired entry and say 9Delete.9 • After you enter the name, the UConnectt system will ask you which designation you wish to delete, home, work, mobile, pager, or all. Say the designation you wish to delete. • After confirmation, the phone book entries will be deleted. • Note that only the phone book in the current language is deleted.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • The UConnectt system will then prompt you as to the number designation you wish to call. call, press and hold the ’Phone’ button until you hear a single beep indicating that the incoming call was rejected. • The selected number will be dialed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE entry you wish to call. The first call will be on hold while the second call is in progress. To go back to the first call, refer to 9Toggling Between Calls.9 To combine two calls, refer to 9Conference Call.9 Place/Retrieve a Call from Hold To put a call on hold, press the 8Phone’ button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the “Phone” button until you hear a single beep.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE hold may not become active automatically. This is cell phone dependent. To bring the call back from hold, press and hold the “Phone” button until you hear a single beep. Redial • Press the “Phone” button to begin. • After the 9Ready9 prompt and the following beep, say 9Redial.9 103 switched to off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE UConnectT System Features Language Selection To change the language that the UConnectt system is using, • Press the “Phone” button to begin. • After the 9Ready9 prompt and the following beep, say the name of the language you wish to switch to (English, Espanol, or Francais, if so equipped). • Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 The UConnectt system does slightly lower your chances of successfully making a phone call as to that for the cell phone directly. Please refer to the 24-Hour “Towing Assistance” coverage details in the Warranty information booklet and on the 24–Hour Towing Assistance Card.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE service or automated customer service. Some services require immediate response selection, in some instances, that may be too quick for use of UConnectt system. When calling a number with your UConnectt system that normally requires you to enter in a touch-tone sequence on your cellular phone keypad, you can push the “Voice Recognition” button and say the sequence you wish to enter followed by the word 9Send.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 a{,9 you could press the “Voice Recognition” button and say 9Pair a Phone9 to select that option without having to listen to the rest of the voice prompt. status when you are attempting to make a phone call using UConnectt. The status is given for roaming, network signal strength, phone battery strength, etc. Turning Confirmation Prompts On/Off Turning confirmation prompts off will stop the system from confirming your choices (e.g.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio. Mute/Un-Mute (Mute Off) When you mute the UConnectt system, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the UConnectt system: • Press the “Voice Recognition” button. • Following the beep, say 9Mute.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE List Paired Cellular Phone Names • Press the “Phone” button to begin. • After the “Ready” prompt and the following beep, say “Setup Phone Pairing.” • When prompted, say 9List Phones.9 • The UConnectt system will play the phone names of all paired cellular phones in order from the highest to the lowest priority. To “select” or “delete” a paired phone being announced, press the “Voice Recognition” button and say “Select” or “Delete.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You can also press the “Voice Recognition” button anytime while the list is being played, and then choose the phone you wish to delete. Things You Should Know About Your UConnectT System UConnectt Tutorial To hear a brief tutorial of the system features, press the “Phone” button and say “UConnectt Tutorial.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Always wait for the beep before speaking. • Speak normally, without pausing, just as you would speak to a person sitting approximately eight (8) feet away from you. • Make sure that no one other than you is speaking during a voice recognition period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the UConnectt system. • In a convertible vehicle, system performance may be compromised with the convertible top down. • Echo at far end can sometime be reduced by lowering the in-vehicle audio volume.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Primary Alternate(s) call cancel confirmation prompts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call UConnectt Tutorial try again voice training work yes 117 3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked. Recliner Adjustment The recliner control is on the outboard side of the seat. To recline the seat, lean forward slightly and lift the lever. Then lean back to the position desired and release the lever.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 forward, rearward, or to tilt the seat. For vehicles equipped with a power passenger seat, use this switch to move the seat forward and rearward. 3 Fold Flat Passenger Seat Power Seat — If Equipped The power seat switch is on the outboard side of the seat near the floor.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Do not place any article under any seat as it may cause damage to the seat controls. WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked. Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 The controls for each heater are located near the bottom center of the instrument panel. After turning on the ignition, you can choose from High, Low, or Off heat settings. Amber indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for high, one for low, and none for off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to select high-level heating. Press the switch a second time to select low-level heating. Press the switch a third time to shut off the heating elements. When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated. The heat output then drops to the normal high-temperature level.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Prior to folding the rear seat, it may be necessary to position the front seat to its mid-track position. Also, be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily. To Lower the Rear Seat 1. Locate the release strap on the lower outboard side of each rear seatback. 2. Pull the release strap (toward the front of the vehicle).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. If desired, push down on the seatback to lock it in the folded position. To Raise the Rear Seat NOTE: If interference from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position. 1. If locked in the folded position, pull the release strap (toward the front of the vehicle). 2. Raise the seatback and lock it into place.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED This feature allows the driver to store up to two different memory profiles, for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat and side mirrors, and a set of desired radio station presets. The memory switch is located on the instrument panel to the left of the steering column. The switch contains an (S) button to activate the memory save function.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • For vehicles equipped with an automatic transmission, memory profiles can be set without the vehicle in “P” (Park), but the vehicle must be in “P” (Park) to recall a memory profile. • For vehicles equipped with a manual transmission, the vehicle speed must be at 0 mph (0 km/h) to recall a memory profile. • The Recall Memory with Remote Key Unlock feature can be turned on and off through the EVIC, if equipped.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 NOTE: Your transmitters can be unlinked to the memory setting by pressing the Set (S) button followed by the Unlock button on the transmitter in Step 4 above. To recall the memory settings for driver one, press memory button number 1 or the Unlock button on the RKE transmitter linked to memory position 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The distance the driver seat moves depends on where you have the driver seat positioned when you remove the key from the ignition switch. • When you remove the key from the ignition switch, the driver seat will move about 2.4 inches (60 mm) rearward if the driver seat position is greater than or equal to 3.5 inches (90 mm) forward of the rear stop.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. First, pull the hood release lever located under the left side of the instrument panel. 131 Next, locate the safety latch lever between the grille and hood opening (left of center when facing hood). Push the safety latch lever to the right and then raise the hood.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the underside of the hood. To prevent possible damage: • Before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. • Do not slam the hood to close it. Use a firm downward push at the center front edge of the hood to ensure that both latches engage.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 LIGHTS Exterior & Interior Lighting Control The Multi-Function Control Lever on the left side of the steering column controls the operation of the headlights, parking lights, turn signal lights, instrument panel lights, instrument panel light dimming, interior lights, and fog lights (if equipped). 3 Headlights & Parking Lights Turn the end of the Multi-Function Control Lever to the first detent for parking light operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped This system automatically turns the headlights ON or OFF according to ambient light levels. To turn the system ON, turn the end of the Multi-Function Control Lever to the (A) AUTO position (third detent). When the system is ON, the Headlight Time Delay feature is also ON. This means the headlights will stay ON for up to 90 seconds after you turn the ignition switch to the LOCK position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE interval begins when you turn off the headlights. Only the headlights will illuminate during this time. If you turn the headlights, or parking lights, or ignition switch on again, the system will cancel the delay. If you turn the headlights off before the ignition, they will turn off in the normal manner. The Headlight delay time is programmable on vehicles equipped with the Electronic Vehicle Information Center (EVIC).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fog Lights — If Equipped To activate the front fog lights, turn on the parking lights or the low beam headlights and pull out on the end of the Multi-Function Control Lever. Turn Signals Move the Multi-Function Lever upward or downward and the corresponding turn signal indicator on the instrument panel will flash to show proper operation of the front and rear turn signal lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 You can signal a lane change by moving the lever upward or downward partially without moving beyond the detent. If either turn signal indicator has a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, see your authorized dealer for service. 3 Highbeam/Lowbeam Select Switch Push the Multi-Function Control Lever away from you to switch the headlights to HIGH beam.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If the Multi-Function Control Lever is held in the Flash to Pass position for more than 15 seconds, the high beams will shut off. If this occurs, wait 30 seconds before activating the Flash to Pass function again. Interior Lights Map/Reading Lights These lights are mounted between the sun visors on the overhead console and above the rear doors by the grab handles. Each light is turned ON by pressing the lens.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Parade Mode (Daytime Brightness Feature) Rotate the Dimmer Control to the first detent to brighten the odometer and radio display when the parking lights or headlights are on during daylight conditions. Interior Light ON Rotate the Dimmer Control completely upward to the second detent to turn on the interior lights. The interior lights will remain on when the dimmer control is in this position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The Windshield Wiper / Washer Control Lever is located on the right side of the steering column. Rotate the end of the lever to the first detent past the intermittent settings for Low-speed wiper operation, or to the second detent past the intermittent settings for High-speed wiper operation. NOTE: The wipers will automatically return to the “Park” position if you turn off the ignition switch while they are operating.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than OFF. • In cold weather, always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Sudden loss of visibility through the windshield could lead to an accident. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with defroster before and during windshield washer use. Mist Feature Push downward on the Windshield Wiper / Washer Control Lever to activate a single wipe cycle to clear the windshield of road mist or spray from a passing vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Headlights with Wipers (Available with Auto Headlights Only) When this feature is active, the headlights will turn ON approximately 10 seconds after the wipers are turned on if the Multi-Function Control Lever (on the left side of the steering column) is placed in the (A) AUTO position. In addition, the headlights will turn OFF when the wipers are turned off if they were turned on by this feature.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • The rain-sensing feature will not operate when the wiper speed is in the LOW or HIGH position. • The rain-sensing feature may not function properly when ice or dried salt water is present on the windshield. • Use of Rain-Xt or products containing wax or silicone may reduce rain sensor performance. • The Rain Sense feature can be turned on and off through the Electronic Vehicle Information Center (EVIC) — if equipped.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE remote start mode is exited. Refer to “Remote Start System” in Section 2 of this manual for information on remote start operation. Windshield Washers To use the washer, pull the Windshield Wiper / Washer Control lever toward you and hold it for as long as washer spray is desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT STEERING COLUMN This feature allows you to tilt the steering column upward or downward. The tilt control handle is located below the steering wheel at the end of the steering column. To unlock the steering column, push the control handle downward. To tilt the steering column, move the steering wheel upward or downward as desired. To lock the steering column in position, pull the control handle upward until fully engaged.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h). Electronic Speed Control Operation The speed control lever is located on the right side of the steering wheel. 147 To Activate: Push and release the (“ON/OFF”) button located on the end of the speed control lever. The CRUISE indicator in the instrument cluster will illuminate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you are not using it. To Set At A Desired Speed: When the vehicle reaches the speed desired, press down on the lever and release (“SET DECEL”). Release the accelerator and the vehicle will operate at the selected speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Resume Speed: If you deactivated the speed control without erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h) you can resume the previous set speed. To do so, push the lever up and release (RESUME ACCEL), and then remove your foot from the accelerator pedal. To Vary The Speed Setting: When the speed control is set, you can increase speed by pushing up and holding the lever (“RESUME ACCEL”).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Vehicles equipped with a manual transmission may need to be shifted into a lower gear to climb hills without speed loss. WARNING! Speed Control can be dangerous where the system can’t maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control. An accident could be the result. Don’t use Speed Control in heavy traffic or on roads that are winding, icy, snow-covered, or slippery.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you move the shift lever to “R” (Reverse) position and the Rear Park Assist System is turned off, a single chime will sound once per ignition cycle and the instrument cluster will display “PARK ASSIST DISABLED.” • The Rear Park Assist System, when on, will MUTE the radio when it is sounding a tone. • If a Rear Park Assist System malfunction occurs, a single chime will sound once per ignition cycle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. You are responsible for safety and must continue to pay attention to your surroundings. Failure to do so can result in serious injury or death.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 3 Rear Park Assist Switch Rear Park Assist Indicator System Operation The system uses four sensors located in the rear bumper fascia to scan for obstacles up to 79 inches (200 cm) away from the rear bumper fascia. The warning display located above the rear window provides both visible and audible warnings to indicate the range of the object.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the ignition is turned to the ON position, and the system is enabled, the warning display will turn ON all of its LEDs for approximately one second. Then, the system dimly illuminates the two outer most yellow LEDs when it is detecting no obstacles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLinkt replaces up to three remote controls (hand held transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems. The HomeLinkt unit operates off your vehicle’s battery. NOTE: HomeLinkt is disabled when the Vehicle Security Alarm is active. 155 WARNING! Your motorized door or gate will open and close while you are training the Universal Transceiver.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run your vehicle in the garage while training the transceiver. Exhaust gas can cause serious injury or death. Programming HomeLinkT Before You Begin If you have not trained any of the HomeLinkt buttons, erase all channels before you begin training. Your vehicle should be parked outside of the garage when programming. 1. Turn the ignition switch to the ON/RUN position. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Some gate operators and garage door openers may require you to replace Step #3 with procedures noted in the “Gate Operator/Canadian Programming” section. • After training a HomeLinkt channel, if the garage door does not operate with HomeLinkt and the garage door opener was manufactured after 1995, the garage door opener may have rolling code. If so, proceed to the heading “Programming A Rolling Code System.” 157 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open & close the door). 6. Firmly press and release the “learn” or “training” button. The name and color of the button may vary by manufacturer. NOTE: There are 30 seconds in which to initiate the next step after the “Learn” button has been pressed. 7.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gate Operator/Canadian Programming Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLinkt to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to “time-out” in the same manner.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reprogramming a Single HomeLinkT Button To re-program a channel that has been previously trained, follow these steps: 1. Turn the ignition switch to the ON/RUN position. 2. Press and hold the desired HomeLinkt button until the indicator light begins to flash after 20 seconds. Do not release the button. 3. Without releasing the button, proceed with PROGRAMMING HOMELINKt Step #2 and follow all remaining steps.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with FCC rules part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. 1. This device may not cause harmful interference 3 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In an accident, there is a greater risk of being thrown from a vehicle with an open sunroof. You could also be seriously injured or killed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 sunroof will automatically retract. Remove the obstruction if this occurs. Next, press the switch forward and release to Express Close. Sunshade Operation The sunshade can be opened manually. However, the sunshade will open automatically as the sunroof opens. Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold. This allows the sunroof to move towards the closed position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. SKY SLIDERT FULL LENGTH OPEN ROOF The Sky Slidert is a full-length, soft-top, power-roof that opens front to rear or rear to front. Ignition Off Operation For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power sunroof switch will remain active for 45 seconds after the ignition switch is turned to the LOCK position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 CAUTION! WARNING! • Never attempt to open or close the Sky Slidert when it is frozen. Wait until the Sky Slidert is thawed before operating. • In an accident, there is a greater risk of being thrown from a vehicle with the Sky Slidert open. Always fasten your seat belt properly and make sure all passengers are properly secured too.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Top Control The Power Top switch is located between the sun visors on the overhead console. Opening the Sky SliderT Using Automatic Mode Press the switch rearward and release it within 1⁄2 second and the Sky Slidert will open from the front and move automatically toward the rear of the vehicle. Press the switch forward and release it within 1⁄2 second and the Sky Slidert will open from the rear and move automatically toward the front of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 NOTE: The Sky Slidert will not open from the front and the rear at the same time. The Sky Slidert must close fully before opening it from the opposite end. NOTE: The Sky Slidert will not open from the front and the rear at the same time. The Sky Slidert must close fully before opening it from the opposite end. Using Operator Mode Press the switch rearward and hold it and the Sky Slidert will open from the front and move toward the rear of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To resume the operation from a partially closed position, press and hold the switch once again. Manually The Sky Slidert drive motors are mounted to the roof above the cargo lamp. In the event that your vehicle losses battery power, you can close the Sky Slidert by turning the drive gears in the appropriate motor with a 6 mm Allen wrench. To do so, you must first remove the cargo lamp from the headliner.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 windows open, then open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the Sky Slidert open, adjust the Sky Slidert opening to minimize the buffeting or open any window. Sky SliderT Maintenance Refer to “Sky Slidert Top Care” under “Maintaining Your Vehicle” in Section 7 of this manual. ELECTRICAL POWER OUTLET Your vehicle is equipped with a fused 12-volt power outlet.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e. cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE A control switch for the outlet is located in the lower switch bank below the climate controls. 171 available at the outlet. Press and release the switch again to turn off the power outlet. The status indicator will also turn off. NOTE: Due to built-in overload protection, the power outlet will shut down if the 115 Volt AC (150 Watt maximum) power rating is exceeded. WARNING! To Avoid Serious Injury or Death: • Do not use a 3-Prong Adaptor.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUP HOLDERS Front and rear cup holders are located in the center console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Front Storage Compartment The front storage compartment (located on the left side of the instrument panel) can hold cell phones, PDA’s, and other small items. Console Storage Compartment To open, press the latch and lift the cover.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The center console has a removable storage tray, which can hold cell phones, PDA’s, and other small items. CARGO AREA FEATURES Cargo Load Floor The cargo load floor system has a load capacity of 400 lbs (181 kg). The load floor has a built-in storage bin that can hold a variety of items. The underside of the storage bin cover also contains a plastic lined tray. The cover can be installed with either side facing up for added utility.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 NOTE: You can install the cover with either side facing upward. 5. With the cover seated in the floor, pull upward on loops and twist them 1⁄4 turn so that they are no longer parallel to the slots in the cover. 6. Flip the loops down. WARNING! 2. Pull the loops upward and twist them 1⁄4 turn so that they are parallel to the slots in the storage bin cover. 3. Lift the cover upward over the loops. 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Tie-Down Hooks & Loops The tie-downs located on cargo area floor should be used to secure loads safely when the vehicle is moving. NOTE: The spring-loaded latches that retain the storage bin cover to the cargo load floor should not be used as cargo tie-downs. Cargo tie-down loops are located on the trim panels.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 WARNING! • Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. • Cargo tie-downs are not safe anchors for a child seat tether strap. In a sudden stop or collision, a tie-down could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. • Place as much cargo as possible in front of the rear axle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Retractable Cargo Area Cover — If Equipped NOTE: The purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. The removable retractable cargo area cover mounts in the cargo area behind the top of the rear seats. The cover, when extended, covers the cargo area to keep items out of sight. Notches in the trim panels near the liftgate opening secure the extended cover in place.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Next, grab the cover handle and pull the cover toward you. As the cover nears the liftgate opening, guide the rear attachment posts (on both ends of the cover) into the notches in the trim panels. Then, lower the cover to position the posts into the bottom of the notches and release the handle. 179 WARNING! In an accident, a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Wiper/Washer — If Equipped The Rear Window Wiper / Washer Control is located on the right side of the steering column. The rotary ring switch on the lever controls rear wiper and washer operation. Rotate the switch upward to the first detent to activate the rear wiper. Rotate the switch upward to the second detent to activate the rear washer. The washer will continue to operate until you release the switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Turn the rear wiper off when driving through an automatic car wash. Damage to the rear wiper may result if the rear wiper control is left in the ON position. • In cold weather, always turn off the rear wiper switch and allow the rear wiper to return to the park position before turning off the engine. If the rear wiper switch is left on and the rear wiper freezes to the window, damage to the rear wiper motor may occur when the vehicle is restarted.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water. • Do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window. • Keep all objects a safe distance from the window.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 CAUTION! WARNING! To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity. Always distribute heavy loads as evenly as possible and secure the load appropriately. Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack Cautions when carrying cargo on your roof rack.
INSTRUMENT PANEL AND CONTROLS CONTENTS m Instrument Panel Features . . . . . . . . . . . . . . . . . 188 ▫ Telephone (UConnect™) — If Equipped . . . . . 214 m Instrument Cluster . . . . . . . . . . . . . . . . . . . . . . 189 ▫ Personal Settings (Customer Programmable Features) . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 m Instrument Cluster Descriptions . . . . . . . . . . . . 190 m Electronic Vehicle Information Center (EVIC) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . .
INSTRUMENT PANEL AND CONTROLS m Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 ▫ Operating Instructions - Radio Mode . . . . . . . 223 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play, DVD-Video) . . . . 231 ▫ Notes On Playing MP3/WMA Files . . . . . . . . 233 ▫ List Button (Disc Mode For MP3/WMA Play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTRUMENT PANEL AND CONTROLS 187 ▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) . . . . . . . . . . . . . . . . . . . . 254 ▫ Left-Hand Switch Functions For Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 259 ▫ Selecting Satellite Mode . . . . . . . . . . . . . . . . . 255 ▫ Left-Hand Switch Functions For Media (i.e. CD) Operation . . . . . . . . . . . . . . . . . . . . 259 ▫ Satellite Antenna . . . . . . . . . . . . . . . . . . . . . .
INSTRUMENT PANEL AND CONTROLS INSTRUMENT PANEL FEATURES 1 2 3 4 — Air Outlet — Instrument Cluster — Storage Tray — Center Air Outlet 5 6 7 8 — — — — Radio Glove Box Climate Control Power Outlet 9 — Lower Switch Bank 10 — Storage Bin* * If Equipped
INSTRUMENT PANEL AND CONTROLS 189 INSTRUMENT CLUSTER 4
INSTRUMENT PANEL AND CONTROLS INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The fuel gauge shows level of fuel in tank when ignition switch is in the ON position. (See page 359 for more information.) 2. Fuel Cap Indicator This symbol indicates the side of the vehicle where the fuel cap is located. 3. Low Fuel Warning Light This indicator lights when the fuel level drops to approximately 1/8 tank. (See page 359 for more information.) 4.
INSTRUMENT PANEL AND CONTROLS significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
INSTRUMENT PANEL AND CONTROLS CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
INSTRUMENT PANEL AND CONTROLS 6. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD that monitors emissions, engine, and automatic transmission control systems. The light will turn on when the key is in the ON position before engine start. If the light does not turn on when turning the key from LOCK or ACC to ON, have the condition checked promptly. Certain conditions such as a loose or missing gas cap, poor fuel quality, etc. may turn on the light after engine start.
INSTRUMENT PANEL AND CONTROLS 8. Front Fog Light Indicator Light — If Equipped This light shows when the fog lights are ON. (See page 133 for more information.) 9. Speedometer Shows the vehicle speed. 10. Turn Signal Indicator Light The left or right arrow will flash in unison with the corresponding front and rear turn signal lights when the turn signal switch is operated. (See page 133 for more information.) NOTE: A chime will sound if the vehicle is driven more than 1 mile (1.
INSTRUMENT PANEL AND CONTROLS 13. Oil Pressure Warning Light This light shows low engine oil pressure. The light will turn on and remain on when the ignition switch is turned from the LOCK or ACC position to the ON position. The light will turn off after the engine is started. If the light does not turn on during starting, have the system checked by an authorized dealer. If the light turns on and remains on while driving, safely bring the vehicle to a stop and shut off the engine.
INSTRUMENT PANEL AND CONTROLS 16. 4 LOW Mode Indicator Light — If Equipped This light alerts the driver that the vehicle is in the 4WD LOW mode. In this mode, the front driveshaft and rear driveshaft are mechanically locked together forcing the front and rear wheels to rotate at the same speed. (See page 292 for more information.) 17. Hill Descent Control Indicator Light — If Equipped The symbol indicates the status of the Hill Decent Control (HDC) feature. The lamp will be on solid when HDC is armed.
INSTRUMENT PANEL AND CONTROLS cluster comes on when the ignition switch is turned to the “ON” position. It should go out with the engine running. If the “ESP/BAS Warning Lamp” comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system, or both.
INSTRUMENT PANEL AND CONTROLS NOTE: As the coolant temperature gauge approaches 9H,9 this indicator will illuminate and a single chime will sound. Further overheating will cause the temperature gauge to pass 9H.9 In this case, the indicator will flash continuously and a continuous chime will sound, until the engine is allowed to cool. CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle.
INSTRUMENT PANEL AND CONTROLS the air conditioner is on, turn it off. Also, shift the transmission into “N” (Neutral) and idle the vehicle. If the needle remains on the “H” mark, turn the engine off immediately and call for service. (See page 384 for more information.) NOTE: The gauge pointer will remain near its last reading when the engine is turned off. It will return to a true reading when the engine is restarted.
INSTRUMENT PANEL AND CONTROLS once again to display the outside temperature and compass heading in the screen below the speedometer. Refer to “Vacuum Fluorescent Display” for details Resetting the Trip Odometer Display the trip mileage that you want to reset, “Trip A” or “Trip B.” Then push and hold the button (approximately 2 seconds) until the display resets to 0. The odometer must be in Trip Mode to reset the trip odometer. 26.
INSTRUMENT PANEL AND CONTROLS NOTE: If the instrument cluster is equipped with the optional Electronic Vehicle Information Center (EVIC), then most warnings will display in the EVIC. (See page 206 for more information.) Fuel Cap Fault Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, the words “gASCAP” will display in the odometer.
INSTRUMENT PANEL AND CONTROLS 2. Fully depress the accelerator pedal slowly three times within 10 seconds. up.” This light will remain on as long as the seat belt remains unbuckled. (See page 48 for more information.) 3. Turn the ignition switch to the LOCK position. 31. Brake System Warning Light This light monitors various brake functions, including brake fluid level and parking brake application.
INSTRUMENT PANEL AND CONTROLS NOTE: The light may flash momentarily during sharp cornering maneuvers, which can change fluid level conditions. The vehicle should have service performed, and the brake fluid level checked. If brake failure is indicated, immediate repair is necessary. WARNING! Driving a vehicle with the brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have an accident. Have the vehicle checked immediately.
INSTRUMENT PANEL AND CONTROLS 32. Vehicle Security Alarm Indicator Light — If Equipped This light will flash rapidly for approximately 16 seconds when the vehicle security system is arming and then flash slowly when the system is armed. The light will also turn on for about three seconds when the ignition is first turned ON. (See page 18 for more information.) 33. Airbag Warning Light This light turns on and remains on for 6 to 8 seconds as a bulb check when the ignition switch is first turned ON.
INSTRUMENT PANEL AND CONTROLS 205 NOTE: Magnetic materials should be kept away from the top of the right rear quarter window. This is where the compass sensor is located. NOTE: The vehicle speed must be at 0 mph (0 km/h) (manual transmission) or the gear selector lever in “P” (Park) (auto transmission) to enter the variance setting mode. To set the variance, first, turn the ignition switch to the ON position.
INSTRUMENT PANEL AND CONTROLS NOTE: The factory default zone is 8. During programming, the zone value will wrap around from zone 15 to zone 1. Calibrating the Compass (Mid Line Cluster Only) If the compass appears erratic, inaccurate, or abnormal, you may wish to calibrate it. However, prior to calibrating the compass, make sure the proper Compass Variance value is selected.
INSTRUMENT PANEL AND CONTROLS • Compass display • Outside temperature display • Trip computer functions • UConnect™ hands-free communication system displays (If Equipped) Press the SCROLL button to scroll through Trip Functions, Navigation (if equipped), System Status Messages, and Personal Settings (CusSCROLL tomer Programmable Features). Button Press and release the COMPASS/ TEMPERATURE button to display one of eight compass readings and the outside temperature.
INSTRUMENT PANEL AND CONTROLS Electronic Vehicle Information Center (EVIC) Displays When the appropriate conditions exist, the Electronic Vehicle Information Center (EVIC) displays the following messages: • Turn Signal On (with a continuous warning chime) • Left Front Turn Signal Light Out (with a single chime) • Memory System Disabled – Vehicle Not in Park (with a single chime) — automatic transmission • Memory System Disabled – Vehicle in Motion (with a single chime) — manual transmission • Memory
INSTRUMENT PANEL AND CONTROLS • Door(s) Ajar (with a single chime if vehicle is in motion) • Liftgate Ajar (with a single chime) • Left Front Low Pressure (with a single chime). Refer to “Tire Pressure Monitoring System” in Section 5 of this manual. • Left Rear Low Pressure (with a single chime). Refer to “Tire Pressure Monitoring System” in Section 5 of this manual. • Right Front Low Pressure (with a single chime). Refer to “Tire Pressure Monitoring System” in Section 5 of this manual.
INSTRUMENT PANEL AND CONTROLS Unless reset, this message will continue to display each time you turn the ignition switch to the ON position. To turn off the message temporarily, press and release the Menu button. To reset the oil change indicator system (after performing the scheduled maintenance) perform the following procedure: Trip Functions Press and release the MENU button until one of the following Trip Functions displays in the EVIC: 1.
INSTRUMENT PANEL AND CONTROLS 211 history information will be erased, and the averaging will continue from the last fuel average reading before the reset. a significant amount of fuel to the vehicle will turn off the 9LOW FUEL9 text and a new DTE value will display. • Distance To Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank.
INSTRUMENT PANEL AND CONTROLS seconds of resetting the currently displayed function (>Reset ALL will display during this 3 second window). Compass Display The compass readings indicate the direction the vehicle is facing. Press and release the compass button to display one of eight compass readings and the outside temperature. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to set the compass manually.
INSTRUMENT PANEL AND CONTROLS Compass Variance Compass Variance is the difference between magnetic North and Geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings. If this occurs, the compass variance must be set using the following procedure: NOTE: Magnetic materials should be kept away from the top of the right rear quarter window. This is where the compass sensor is located.
INSTRUMENT PANEL AND CONTROLS 1. Turn the ignition switch ON. 2. Press and hold the compass button for approximately 2 seconds. 3. Press the SCROLL button until “Compass Variance” message and the last variance zone number displays in the EVIC. 4. Press and release FUNCTION SELECT button until the proper variance zone is selected according to the map. 5. Press and release the compass button to exit.
INSTRUMENT PANEL AND CONTROLS The EVIC displays this symbol to indicate an incoming call. Incoming Call The EVIC displays this symbol to indicate that you have voice mail. Voice Mail The EVIC displays this symbol to indicate that the UConnect™ phone is currently in analog mode. Analog The EVIC displays this symbol to indicate that the UConnect™ phone is currently roaming. Roaming 215 The EVIC displays this symbol to indicate a text message.
INSTRUMENT PANEL AND CONTROLS The EVIC displays this symbol to indicate that a phone connection has been made. Press and release the MENU button until Personal Settings displays in the EVIC. Use the SCROLL button to display one of the following choices: Call in Progress The EVIC displays this symbol to indicate that the Connect™ phone is currently not available.
INSTRUMENT PANEL AND CONTROLS details. For vehicles equipped with sales code RER radio, refer to your “Navigation User’s Manual” for UConnect™ system operating instructions. Lock Doors Automatically at 15 mph (24 km/h) When ON is selected, all doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h). To make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears.
INSTRUMENT PANEL AND CONTROLS FUNCTION SELECT button until “ON” or “OFF” appears. Refer to “Driver Memory Seat” in Section 3 of this manual for more information. Sound Horn with Remote Key Lock When ON is selected, a short horn sound will occur when the remote keyless entry “Lock” button is pressed. This feature may be selected with or without the flash lights on lock/unlock feature. To make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears.
INSTRUMENT PANEL AND CONTROLS 219 selected. To make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears. when exiting the vehicle. To make your selection, press and release the FUNCTION SELECT button until “0,” “30,” “60,” or “90” appears. Headlights On with Wipers (Available with Auto Headlights Only) When ON is selected, and the headlight switch is in the AUTO position, the headlights will turn on approximately 10 seconds after the wipers are turned on.
INSTRUMENT PANEL AND CONTROLS your selection, press and release the FUNCTION SELECT button until “Off,” “45 sec.,” “5 min.,” or “10 min.” appears. Illumination Approach When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the remote keyless entry transmitter. To make your selection, press and hold the RESET button until “OFF,” “30 sec,” “60 sec,” or “90 sec” appears.
INSTRUMENT PANEL AND CONTROLS RADIO GENERAL INFORMATION Radio Broadcast Signals Your new radio will provide excellent reception under most operating conditions. Like any system, however, car radios have performance limitations, due to mobile operation and natural phenomena, which might lead you to believe your sound system is malfunctioning.
INSTRUMENT PANEL AND CONTROLS 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: For vehicles equipped with the EVIC, the radio and steering wheel radio controls (if equipped) will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
INSTRUMENT PANEL AND CONTROLS Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the volume control to the right increases the volume and to the left decreases it.
INSTRUMENT PANEL AND CONTROLS Phone Button (UConnect™ Hands Free Phone) — If Equipped Press this button to operate the Hand Free Phone (UConnect™) feature (if equipped). Refer to “Hands-Free Communication (UConnect™)” in Section 3 for more information. If your vehicle is not equipped with or this feature is not available on your vehicle, a “UConnect™ System Not Available” message will display on the radio screen. TIME Button Press the TIME button and the time of day will display.
INSTRUMENT PANEL AND CONTROLS RW/FF (Radio Mode) Pressing the rewind or fast forward button causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM, FM or Satellite (if equipped) frequencies. TUNE Control (Radio Mode) Turn the right side rotary control clockwise to increase or counter-clockwise to decrease the frequency. Setting the Tone, Balance, and Fade Press the rotary TUNE control knob and BASS will display.
INSTRUMENT PANEL AND CONTROLS program format type to be selected. Many radio stations do not currently broadcast Music Type information.
INSTRUMENT PANEL AND CONTROLS By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station.
INSTRUMENT PANEL AND CONTROLS • Angle – Repeatedly Pressing SELECT will change the viewing angle if supported by the DVD disc (If Equipped). NOTE: The available selections for each of the above entries varies depending upon the disc. NOTE: These selections can only be made while playing a DVD. • VES Power - Allows you to turn VES ON and OFF (If Equipped). • VES Lock - Locks out rear VES remote controls (If Equipped).
INSTRUMENT PANEL AND CONTROLS 229 Audio Language — If Equipped Audio DRC — If Equipped Selecting this item will allow the user to choose a default audio language (effective only if language supported by disc). If customer wishes to select a language not listed, then scroll down and select 9other.9 Enter the country code using the TUNE control knob to scroll up and down to select the # and then push to select.
INSTRUMENT PANEL AND CONTROLS NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the customer-preferred settings. AM and FM Buttons (Radio Mode) Press the buttons to select AM or FM Modes.
INSTRUMENT PANEL AND CONTROLS Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play, DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These region codes must match in order for the disc to play. If the region code for the DVD disc does not match the region code for the radio DVD player, it will not play the disc. Customers may take their vehicle to an authorized dealer to change the region code of the player a maximum of 5 times.
INSTRUMENT PANEL AND CONTROLS Eject Button — Ejecting Compact Disc(s) Press the eject button and the push-button with the corresponding number (1-6) where the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show 9EJECTING DISC9 when the disc is being ejected and prompt the user to remove the disc. Press and hold the eject button for 5 seconds and all CDs will be ejected from the radio. The disc can be ejected with the radio and ignition OFF.
INSTRUMENT PANEL AND CONTROLS Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however, acceptable MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the following restrictions. Supported Media (Disc Types) The MP3/WMA file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3,WMA, DVD Video, DVD-R, DVD-RW, DVD+R, DVD+RW, and CDDA+MP3.
INSTRUMENT PANEL AND CONTROLS If a disc contains multi formats, such as CD audio and mp3/wma tracks, the radio will only play the mp3/wma tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.MP3/WMA extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3/WMA and will not play the file.
INSTRUMENT PANEL AND CONTROLS Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files.
INSTRUMENT PANEL AND CONTROLS Press and hold the INFO button again for 3 seconds to return to 9elapsed time9 display. SCAN Button (Auxiliary Mode) No function. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3/WMA player, cassette player, or microphone and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. EJECT Button (Auxiliary Mode) No function.
INSTRUMENT PANEL AND CONTROLS Operating Instructions - Hands Free Phone (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section. Operating Instructions - Video Entertainment System (VESt) (If Equipped) Refer to separate “Video Entertainment System (VESt) Guide.” Dolby Manufactured under license from Dolby Laboratories.
INSTRUMENT PANEL AND CONTROLS player, USB port, 20 gigabyte Hard Drive (HDD), and the UConnectt hands-free Bluetooth cellular system. NOTE: If your vehicle is not equipped with UConnectt, the unit will respond with a “Feature Not Available” message when selecting controls related to this feature. A 6.5-inch touch screen allows easy menu selection, while the Advanced Voice Dialog System recognizes more than 1,000 words for audio, navigation, entertainment, and hands-free mobile phone use.
INSTRUMENT PANEL AND CONTROLS camera, and on some models a dual display screen operation. Refer to your “Navigation User’s Manual” for detailed operating instructions. Operating Instructions — Satellite Radio Refer to your “Navigation User’s Manual” for detailed operating instructions. Operating Instructions — Hands-Free Communication (UConnect™) (If Equipped) Refer to your “Navigation User’s Manual” for detailed operating instructions.
INSTRUMENT PANEL AND CONTROLS Changing Daylight Savings Time When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. If the words “Time: User Clock” are displayed at the top of the screen, proceed to Step 4. Otherwise, proceed to Step 3. 1. Turn on the system. 3.
INSTRUMENT PANEL AND CONTROLS 241 6. To save the new time setting, touch the screen where the word “Save” is displayed. SALES CODE RES — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) Show Time if Radio is Off When selected, this feature will display the time of day on the touch screen when the system is turned off. Proceed as follows to change the current setting: NOTE: The radio sales code is located on the lower right side of your radio faceplate. 4 1. Turn on the system. 2.
INSTRUMENT PANEL AND CONTROLS Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
INSTRUMENT PANEL AND CONTROLS If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped With UConnect” message will display on the radio screen. Phone Button (UConnect™ Hands Free Phone) — If Equipped Press this button to operate the Hand Free Phone (UConnect™) feature (if equipped). Refer to “Hands-Free Communication (UConnect™)” in Section 3 for more information.
INSTRUMENT PANEL AND CONTROLS Step 2. For vehicles not equipped with satellite radio, press the SETUP button and then follow the above procedure, starting at Step 2. INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text message broadcast from an FM station (FM mode only). RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows.
INSTRUMENT PANEL AND CONTROLS Press the rotary TUNE control knob a fifth time and FADE will display. Turn the TUNE control knob to the left or right to adjust the sound level between the front and rear speakers. Press the rotary TUNE control knob again to exit setting tone, balance, and fade. MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for 5 seconds.
INSTRUMENT PANEL AND CONTROLS Program Type Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather 16 Digit-Character Display R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R&B Sports Talk Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode.
INSTRUMENT PANEL AND CONTROLS SET Button — To Set the Push-Button Memory When you are receiving a station that you wish to commit to push-button memory, press the SET button. The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this station and press and release that button. If a button is not selected within 5 seconds after pressing the SET button, the station will continue to play but will not be stored into push-button memory.
INSTRUMENT PANEL AND CONTROLS Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display. If a CD does not go into the slot more than an inch, a disc may already be loaded and must be ejected before a new disc can be loaded.
INSTRUMENT PANEL AND CONTROLS 249 If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display. A disc can be ejected with the radio and ignition OFF. RW/FF Press the RW button to stop the CD at the beginning of the current CD track/title.
INSTRUMENT PANEL AND CONTROLS Press the right SEEK button to move to the next randomly selected track. files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. Press the RND button a second time to stop Random Play. The radio uses the following limits for file systems: Notes On Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 file recording media and formats are limited.
INSTRUMENT PANEL AND CONTROLS • Level 2: 31 (including a separator 9.9 and a 3-character extension) Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files). Discs created with an option such as 9keep disc open after writing9 are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times.
INSTRUMENT PANEL AND CONTROLS Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
INSTRUMENT PANEL AND CONTROLS Press and hold the INFO button again for 3 seconds to return to 9elapsed time9 display. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pushing the AUX button will change the mode to auxiliary device if the AUX jack is connected.
INSTRUMENT PANEL AND CONTROLS SATELLITE RADIO (RSC) — IF EQUIPPED (RER/REQ/REN RADIOS ONLY) Satellite radio uses direct satellite to receiver broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius™ Satellite Radio. This service offers up to 100 channels of music, sports, news, entertainment, and programming for children, directly from its satellites and broadcasting studios.
INSTRUMENT PANEL AND CONTROLS selected. Press the TUNE control knob and the Sirius ID number will display. The Sirius ID number display will time out in 2 minutes. Press any button on the radio to exit this screen. Selecting Satellite Mode Press the SAT button until 9SAT9 appears in the display. A CD may remain in the radio while in the Satellite radio mode.
INSTRUMENT PANEL AND CONTROLS SEEK Buttons Press and release the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to search for the next channel, pausing for 8 seconds before continuing to the next.
INSTRUMENT PANEL AND CONTROLS By pressing the SEEK button when the Music Type function is active, the radio will be tuned to the next channel with the same selected Music Type name. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset channel. SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the SELECT button to display the Sirius ID number.
INSTRUMENT PANEL AND CONTROLS Operating Instructions - Hands Free Phone (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual. Operating Instructions - Video Entertainment System (VES™) (If Equipped) Refer to separate “Video Entertainment System (VES™) Guide.” REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel.
INSTRUMENT PANEL AND CONTROLS Left-Hand Switch Functions for Radio Operation • Press the top of the switch to SEEK the next listenable station up from the current setting. • Press the bottom of the switch to SEEK the next listenable station down from the current setting. • Press the button in the center of the switch to tune to the next preset that you have programmed. Left-Hand Switch Functions for Media (i.e. CD) Operation • Press the top of the switch once to listen to the next track.
INSTRUMENT PANEL AND CONTROLS 5. Store the disc in its case after playing. Manual Air Conditioning and Heating System 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatures may become too high. CLIMATE CONTROLS The Air Conditioning and Heating System is designed to make you comfortable in all types of weather. The Manual Temperature Controls consist of a series of outer rotary dials and inner push buttons.
INSTRUMENT PANEL AND CONTROLS Blower Control Use this control to regulate the amount of air forced through the ventilation system in any mode. The blower speed increases as you move the control to the right from the “O” (Off) position. There are four blower speeds. Temperature Control Use this control to regulate the temperature of the air inside the passenger compartment. The blue area of the scale indicates cooler temperatures while the red area indicates warmer temperatures.
INSTRUMENT PANEL AND CONTROLS • Panel Air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. • Floor NOTE: The center instrument panel outlets can be aimed so that they are directed toward the rear seat passengers for maximum airflow to the rear. • Mix • Bi-Level Air is directed through the panel and floor outlets. NOTE: For all settings except full cold or full hot, there is a difference in temperature between the upper and lower outlets.
INSTRUMENT PANEL AND CONTROLS NOTE: The air conditioning compressor operates in Mix and Defrost, or a blend of these modes, even if the Air Conditioning Snowflake button is not pressed. This dehumidifies the air to help dry the windshield. To improve fuel economy, use these modes only when necessary. • Recirculation Control Use this button to block the flow of outside air from coming into the passenger compartment. A light will illuminate when the system is in recirculation mode.
INSTRUMENT PANEL AND CONTROLS • MAX A/C For maximum cooling use the A/C and recirculation buttons at the same time. Automatic Temperature Control (ATC) — If Equipped • Economy Mode If economy mode is desired, press the A/C button to turn off the indicator light and the A/C compressor. Then, move the temperature control to the desired temperature.
INSTRUMENT PANEL AND CONTROLS cabin infrared sensor mounted between the sun-visors and from various sensors located throughout the vehicle. The controls on the climate control provide the system with operator input. Other sensors take account of vehicle speed, A/C pressure, outside temperature, and engine cooling temperature. Using all of these inputs, the system automatically adjusts airflow temperature, airflow distribution, airflow volume, and the amount of outside air recirculation.
INSTRUMENT PANEL AND CONTROLS NOTE: • The temperature setting can be adjusted at any time without affecting automatic operation. • Pressing the Air Conditioning Control button while in AUTO mode will cause the LED in the control button to flash three times and then turn off. This indicates that the system is in AUTO mode and requesting the air conditioning is not necessary.
INSTRUMENT PANEL AND CONTROLS 267 4
INSTRUMENT PANEL AND CONTROLS The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control knob (on the right) to one of the following positions. • Panel Air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. NOTE: The center instrument panel outlets can be aimed so that they are directed toward the rear seat passengers for maximum airflow to the rear.
INSTRUMENT PANEL AND CONTROLS 269 • Air Conditioner Control Press this button to turn on the air conditioning during manual operation only. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the Mode control dial. Press this button a second time to turn off the air conditioning. An LED in the button illuminates when manual compressor operation is selected.
INSTRUMENT PANEL AND CONTROLS • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation Button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation Button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into recirculation mode at this time.
INSTRUMENT PANEL AND CONTROLS Window Fogging Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather. NOTE: Recirculate without A/C should not be used for long periods as fogging may occur.
INSTRUMENT PANEL AND CONTROLS Control Setting Suggestions for Various Weather Conditions
STARTING AND OPERATING CONTENTS m Starting Procedures . . . . . . . . . . . . . . . . . . . . . 277 m Automatic Transmission . . . . . . . . . . . . . . . . . . 281 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 277 ▫ Shift Lock Manual Override — If Equipped . . . 281 ▫ Manual Transmission — If Equipped . . . . . . . 277 ▫ Brake/Transmission Interlock System . . . . . . . 283 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . . 277 ▫ 4–Speed Automatic Transmission . . . . . . . . .
STARTING AND OPERATING ▫ MP1522 Command-Tract Transfer Case — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 292 ▫ MP3022 Selec-Trac IIt Transfer Case — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 298 m On-Road Driving Tips . . . . . . . . . . . . . . . . . . . 303 m Off-Road Driving Tips . . . . . . . . . . . . . . . . . . . 304 ▫ When To Use 4WD Low Range . . . . . . . . . . . 304 ▫ Driving Through Water . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 275 ▫ Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . 329 m Tire Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 ▫ Tire Identification Number (TIN) . . . . . . . . . . 332 m Tire Rotation Recommendations . . . . . . . . . . . . 345 ▫ Tire Loading And Tire Pressure . . . . . . . . . . . 333 m Tire Pressure Monitor System (TPMS) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 346 m Tires — General Information . . . . . . . . . .
STARTING AND OPERATING ▫ Carbon Monoxide Warnings . . . . . . . . . . . . . . 358 m Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 359 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . . . 359 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . . 361 m Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . . . 361 ▫ Certification Label . . . . . . . . . . . . . . . . . . . . . 361 m Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. WARNING! Do not leave children or animals inside parked vehicles in hot weather. Interior heat build up may cause serious injury or death. Automatic Transmission Start the engine with the selector lever in the “N” (Neutral) or “P” (Park) position. Apply the brake before shifting to any driving range.
STARTING AND OPERATING For vehicles equipped with Tip Start, turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 seconds. If this occurs, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the normal starting procedure.
STARTING AND OPERATING 279 Without Tip Start If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” procedures, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded. seconds with the accelerator pedal pushed all the way to the floor. Release the accelerator pedal and the key once the engine is running smoothly.
STARTING AND OPERATING CAUTION! To prevent damage to the starter, wait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up. ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather. Connect the cord to a standard 110-115 volt AC electrical outlet with a grounded three-wire extension cord. WARNING! WARNING! Remember to disconnect the cord before driving.
STARTING AND OPERATING AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into “P” (Park) only after the vehicle has come to a complete stop. • Shift into or out of “R” (Reverse) only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from “R” (Reverse), “P” (Park), or “N” (Neutral) into any forward gear when the engine is above idle speed.
STARTING AND OPERATING 1. Firmly set the parking brake. 2. Using a flat blade screwdriver, carefully remove the shift lock manual override cover, which is located on the PRNDL bezel. 3. Depress and maintain firm pressure on the brake pedal. 4. Using the screwdriver, reach into the manual override opening. Press and hold the shift lock lever down. 5. Move the shift lever into the “N” (Neutral) position. 6. The vehicle may then be started in “N” (Neutral).
STARTING AND OPERATING 283 Brake/Transmission Interlock System This system prevents you from moving the gear shift out of “P” (Park) and into any gear unless the brake pedal is pressed. Always depress the brake pedal first, before moving the gear selector out of “P” (Park). 4–Speed Automatic Transmission Shifting from “D” (Drive) to “P” (Park) or “R” (Reverse) (or from “P” or “R” to “D”) should be done only after the accelerator pedal is released and the vehicle is stopped.
STARTING AND OPERATING “P” (Park) This gear position supplements the parking brake by locking the transmission. The engine can be started in this range. Never use “P” (Park) while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. Always apply parking brake first, and then place the selector in “P” (Park) position. WARNING! Never use “P” (Park) position as a substitute for the parking brake.
STARTING AND OPERATING 285 “N” (Neutral) Shift into “N” (Neutral) when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range. Set the parking brake if you must leave the vehicle. “1” (First) For hard pulling at low speeds in mud, sand, snow, or on steep grades. Begins and stays in low gear with no upshift. Provides engine compression braking at low speeds.
STARTING AND OPERATING NOTE: • If the vehicle is started in extremely cold temperatures, the transmission may not shift into Overdrive. It will however, automatically select the most desirable gear for operation at this temperature. Normal operation will resume when the transmission fluid temperature has risen to a suitable level. • If the transmission temperature gets extremely hot, the transmission will automatically select the most desirable gear for operation at this temperature.
STARTING AND OPERATING 287 Torque Converter Clutch A feature designed to improve fuel economy has been added to the automatic transmission of this vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly different feeling or response during normal operation in high gear. When the vehicle speed drops or during acceleration, the clutch automatically and smoothly disengages.
STARTING AND OPERATING A Reset feature allows the vehicle to be driven to a dealer for service without damaging the transmission. To reset the transmission, perform the following procedure: 1. Stop the vehicle. 2. Move the selector lever to the “P” (Park) position. 3. Turn off the engine; be sure to turn the key to the LOCK position. 4. Wait approximately 10 seconds, and then restart the engine. 5. Move the selector lever to the desired gear range.
STARTING AND OPERATING 289 6-Speed Manual Transmission WARNING! You or others could be injured if you leave the vehicle unattended without having the parking brake fully applied. The parking brake should always be applied when the driver is not in the vehicle, especially on an incline. 5 Follow the shift pattern on the gearshift knob. NOTE: The backup lights will come on when your vehicle is in “R” (Reverse) gear and the ignition is in the ON position.
STARTING AND OPERATING WARNING! When parking your vehicle, always leave a manual transmission in first gear and apply the parking brake fully to guard against vehicle movement and possible injury or damage. Never use any gear as a substitute for the parking brake. CAUTION! To drive as safely as possible and to prolong the life of your manual transmission, follow these tips: • Before shifting from a forward gear into reverse, or from reverse to a forward gear, stop vehicle completely.
STARTING AND OPERATING • When “rocking” a stuck vehicle by shifting between a forward gear and reverse, do not spin wheels faster than 15 mph (24 km/h), or drivetrain damage may result. Recommended Manual Transmission Shifting Speeds The manufacturer recommends that you use the shift speeds listed in the chart below. Manual Transmission Shift Speeds in MPH (KM/H) EnSpeeds 1 to 2 2 to 3 3 to 4 4 to 5 5 to 6 gine 3.7L Accel.
STARTING AND OPERATING CAUTION! Failure to follow the recommended downshifting speeds may cause the engine to over speed and/or damage the clutch disc even if the clutch pedal is depressed. FOUR-WHEEL DRIVE OPERATION MP1522 Command-TracT Transfer Case — If Equipped Operating Information & Precautions The Command-Tract transfer case provides four positions: • 2 (rear) wheel drive high range. • 4-wheel drive high range. • Neutral. • 4-wheel drive low range.
STARTING AND OPERATING 293 CAUTION! WARNING! • Do not attempt to make a shift while only the front wheels or rear wheels are spinning. The MP1522 Command-Tract transfer case is not equipped with a synchronizer and therefore the speed of the front driveshaft and rear driveshaft must be equal for the shift to take place. Shifting while only the front wheels or rear wheels are spinning can cause damage to the transfer case.
STARTING AND OPERATING Shift Positions The electronic transfer case switch is located on the center console next to the gear selector lever. 4WD Control Switch 2WD Rear Wheel Drive High Range - Normal street and highway driving. Dry hard surfaced roads. 4WD Lock 4-Wheel-Drive High Range - Locks the front driveshaft and rear driveshaft together and forces the front and rear wheels to rotate at the same speed. Additional traction for loose or slippery road surfaces only.
STARTING AND OPERATING 295 N Neutral - Disengages both the front driveshaft and rear driveshaft from the powertrain. To be used for flat towing behind another vehicle. Refer to “Recreational Towing” in this section for more information. NOTE: The “SERV 4WD” warning light monitors the electric shift 4WD system. If this light remains on after engine start up, or it illuminates during driving, it means that the 4WD system is not functioning properly and that service is required.
STARTING AND OPERATING 2WD to 4WD Lock Move the 4WD Control Switch to the desired position. Shifts between 2WD and 4WD LOCK can be done with the vehicle stopped or in motion. With the vehicle in motion, the transfer case will engage / disengage faster if you momentarily release the accelerator pedal after moving the 4WD Control Switch. If the vehicle is stopped, the ignition switch must be in the ON position with the engine either OFF or RUNNING.
STARTING AND OPERATING Preferred Procedure 1. With the engine RUNNING, slow the vehicle speed to 2-3 mph (3-5 km/h). 2. Shift the transmission into “N” (Neutral) (automatic transmission), or depress the clutch pedal (manual transmission). 3. While still rolling, move the 4WD Control Switch to the desired position. 4. After the desired position indicator light is ON (not flashing), shift the transmission into gear (automatic transmission), or release the clutch pedal (manual transmission).
STARTING AND OPERATING original position, make certain all shift requirements have been met, wait five (5) seconds, and try the shift again. • The ignition switch must be in the ON position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON position, then the shift will not take place and no position indicator lights will be on or flashing.
STARTING AND OPERATING 299 CAUTION! WARNING! • The 4WD Low position is intended for loose or slippery road surfaces only. Driving in this position on dry hard surfaced roads may cause increased tire wear and damage to the driveline components. • You or others could be injured if you leave the vehicle unattended with the transfer case in the Neutral (N) position without first fully engaging the parking brake.
STARTING AND OPERATING Shift Positions The electronic transfer case switch is located on the center console next to the gear selector lever. 4WD Control Switch 2WD Rear Wheel Drive High Range - Normal street and highway driving. Dry hard surfaced roads. 4WD Auto 4-Wheel-Drive Auto High Range – This active ondemand position makes available optimum traction for a wide range of conditions, while maximizing driver convenience.
STARTING AND OPERATING Interlocking Ignition System” under “Manual Transmission” or to “Starting Procedures” in this section for details. N Neutral - Disengages both the front driveshaft and rear driveshaft from the powertrain. To be used for flat towing behind another vehicle. Refer to “Recreational Towing” in this section for more information. Transfer Case Position Indicator Lights The 4WD indicator lights are located in the instrument cluster.
STARTING AND OPERATING position, make certain all shift requirements have been met, wait five (5) seconds, and try the shift again. 2WD to 4WD Auto Move the 4WD Control Switch to the desired position. Shifts between 2WD and 4WD Auto can be done with the vehicle stopped or in motion. If the vehicle is stopped, the ignition switch must be in the ON position with the engine either OFF or RUNNING. This shift cannot be completed if the ignition switch is in the ACC position. Preferred Procedure 1.
STARTING AND OPERATING 2. With the ignition switch in the ON position and the engine OFF or RUNNING, shift the transmission into “N” (Neutral) (automatic transmission), or depress the clutch pedal (manual transmission). 3. Move the 4WD Control Switch to the desired position. 4. After the desired position indicator light is ON (not flashing), shift the transmission into gear (automatic transmission), or release the clutch pedal (manual transmission).
STARTING AND OPERATING conventional 2-wheel drive vehicles any more than lowslung sports cars are designed to perform satisfactorily in off-road conditions. If at all possible, avoid sharp turns or abrupt maneuvers. As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control or vehicle rollover.
STARTING AND OPERATING caution and maintain a steady controlled speed less than 5 mph (8 km/h) in deep water to minimize wave effects. Flowing Water If the water is swift flowing and rising (as in storm run-off) avoid crossing until the water level recedes and/or the flow rate is reduced. If you must cross flowing-water, avoid depths in excess of 9 inches. The flowing water can erode the streambed causing your vehicle to sink into deeper water.
STARTING AND OPERATING Hill Climbing NOTE: Before attempting to climb a hill, determine the conditions at the crest and/or on the other side. Before climbing a steep hill, shift the transmission to a lower gear and shift the transfer case to 4WD Low. Use first gear and 4WD Low for very steep hills. If you stall or begin to lose headway while climbing a steep hill, allow your vehicle to come to a stop and immediately apply the brakes. Restart the engine and shift to R (Reverse).
STARTING AND OPERATING Traction Downhill Shift the transmission into a low gear and the transfer case to 4WD Low range. Let the vehicle go slowly down the hill with all four wheels turning against engine compression drag. This will permit you to control the vehicle speed and direction. When descending mountains or hills, repeated braking can cause brake fade with loss of braking control. Avoid repeated heavy braking by downshifting the transmission whenever possible.
STARTING AND OPERATING WARNING! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. You might not have full braking power when you need it to prevent an accident. If you have been operating your vehicle in dirty conditions, get your brakes checked and cleaned as necessary. • If you experience unusual vibration after driving in mud, slush, or similar conditions, check the wheels for impacted material.
STARTING AND OPERATING 309 Be sure the parking brake is firmly set when parked, and the gear selector lever is in the “P” (Park) position (automatic transmission) or “R” (Reverse) or 1st gear (manual transmission). When parking on a hill, you should apply the parking brake before placing the gear selector lever in “P” (Park); otherwise, the load on the transmission locking mechanism may make it difficult to move the selector out of “P” (Park).
STARTING AND OPERATING WARNING! • Always apply the parking brake fully when leaving your vehicle or it may roll and cause damage or injury. Also, be certain to leave an automatic transmission in “P” (Park) or a manual transmission in “R” (Reverse) or 1st gear. Failure to do so may allow the vehicle to roll and cause damage or injury. • Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be injured. Don’t leave the keys in the ignition.
STARTING AND OPERATING 311 WARNING! WARNING! Significant over or under inflation of tires or mixing sizes of tires or wheels on the vehicle can lead to loss of braking effectiveness. Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an accident. Pumping makes the stopping distance longer. Just press firmly on your brake pedal when you need to slow down or stop. The Anti-Lock Brake System conducts a low-speed selftest at about 12 mph (20 km/h).
STARTING AND OPERATING WARNING! CAUTION! • The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. The Anti-Lock Brake System is subject to possible detrimental effects of electronic interference caused by improperly installed after-market radios or telephones.
STARTING AND OPERATING • Do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and result in unpredictable braking action, longer stopping distances, or brake damage. • When descending mountains or hills, repeated braking can cause brake fade with loss of braking control. Avoid repeated heavy braking by downshifting the transmission or locking out overdrive whenever possible.
STARTING AND OPERATING NOTE: Increased noise levels at the end of the steering wheel travel are considered normal and do not indicate that there is a problem with the power steering system. Upon initial start-up in cold weather, the power steering pump may make noise for a short amount of time. This is due to the cold, thick fluid in the steering system. This noise should be considered normal, and it does not in any way damage the steering system.
STARTING AND OPERATING Two additional electronic brake control system options are HDC (Hill Descent Control) and TSC (Trailer Sway Control). Your vehicle may be equipped with one or both of these options. ABS (Anti-Lock Brake System) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressure to prevent wheel lock-up to help avoid skidding on slippery surfaces during braking.
STARTING AND OPERATING TCS (Traction Control System) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. A feature of the TCS system functions similar to a limited slip differential and controls the wheel spin across a driven axle.
STARTING AND OPERATING WARNING! BAS (Brake Assist System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
STARTING AND OPERATING WARNING! Many factors, such as vehicle loading, road conditions, and driving conditions, influence the chance that wheel lift or rollover may occur. ERM (Electronic Roll Mitigation) cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles. Only a safe, attentive, and skillful driver can prevent accidents.
STARTING AND OPERATING WARNING! • TSC (Trailer Sway Control) cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the tongue weight recommendations. Refer to ”Vehicle Loading” and “Trailer Towing” in this section for more information before towing a trailer with your vehicle. • If TSC activates while towing a trailer, stop the vehicle at the nearest safe location and adjust the trailer load to eliminate the trailer sway.
STARTING AND OPERATING • For vehicles equipped with an automatic transmission, the HSA will work in reverse gear and all forward gears. The system will not activate if the transmission is in “P” (Park). • For vehicles equipped with a manual transmission, the HSA will work in reverse gear, neutral, and all forward gears. WARNING! There may be situations where the HSA (Hill Start Assist) will not activate and slight rolling may occur, such as on minor hills (i.e.
STARTING AND OPERATING WARNING! • If you use a trailer brake controller with your trailer, the trailer brakes may be activated and deactivated with the brake switch. If so, there may not be enough brake pressure to hold both the vehicle and the trailer on a hill when the brake pedal is released. In order to avoid rolling down an incline while resuming acceleration, manually activate the trailer brake or apply more vehicle brake pressure prior to releasing the brake pedal. • HSA is not a parking brake.
STARTING AND OPERATING 3. Apply the parking brake. 4. Start the engine. 5. Release the clutch pedal (manual transmission). 6. Rotate the steering wheel 1⁄2 turn to the left. 7. Press the “ESP OFF” button located in the lower switch bank below the climate control four times within twenty seconds. The “ESP/TCS Indicator” light should turn on and turn off two times. 8. Rotate the steering wheel back to center and then an additional 1⁄2 turn to the right. 9.
STARTING AND OPERATING HDC control speed. Conversely, if more speed is desired during HDC control, the accelerator pedal will increase vehicle speed in the usual manner. When either the brake or the accelerator is released, HDC will control the vehicle at the original set speed. 323 The “Hill Descent” button is located in the lower switch bank below the climate control. NOTE: HDC is available on vehicles equipped with the MP1522 transfer case. • The transfer case must be in 4WD low range to enable HDC.
STARTING AND OPERATING Press the “Hill Descent” button. The “Hill Descent Control Indicator” light in the instrument cluster will turn on solid. NOTE: If the transfer case is not in 4WD low range, the “Hill Descent Control Indicator” light will flash for 5 seconds and HDC will not be enabled. Disabling HDC 1. Press the “Hill Descent” button or shift the transfer case out of 4WD low range. The “Hill Descent Control Indicator” light in the instrument cluster will turn off.
STARTING AND OPERATING accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. WARNING! ESP (Electronic Stability Program) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESP cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
STARTING AND OPERATING Partial Off — 2WD Vehicles & 4WD Vehicles in 2WD & 4WD High Range The “Partial Off” mode is intended for driving in deep snow, sand, or gravel. This mode raises the threshold for TCS and ESP activation, which allows for more wheel spin than what ESP normally allows. The “ESP OFF” button is located in the lower switch bank below the climate Control. To enter the “Partial Off” mode, momentarily depress the “ESP OFF” button and the 9ESP/TCS Indicator” light will illuminate.
STARTING AND OPERATING mode is overcome, turn ESP back on by momentarily depressing the “ESP OFF” button. This may be done while the vehicle is in motion. Full Off — 4WD Vehicles in 4WD High & 4WD Low Range The “Full Off” mode is intended for off-highway and off-road use when ESP stability features could inhibit vehicle maneuverability due to trail conditions. The “ESP OFF” button is located in the lower switch bank below the climate Control.
STARTING AND OPERATING WARNING! With the ESP switched off, the enhanced vehicle stability offered by ESP is unavailable. In an emergency evasive maneuver, the ESP system will not engage to assist in maintaining stability. “Full Off” mode is only intended for off-highway or off-road use. ESP/BAS Warning Light & ESP/TCS Indicator Light The malfunction indicator for the ESP is combined with the BAS indicator.
STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings 329 • European Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter 9P9 is absent from this tire size designation. Example: 215/65R15 96H • LT (Light Truck)-Metric tire sizing is based on U.S. design standards.
STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards (....blank....( = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm) 65 = Aspect Ratio in Percent (%) —Ratio of section height to section width of tire. 10.
STARTING AND OPERATING 331 EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be achieved under specified operating conditions (i.e. tire pressure, vehicle loading, road conditions, and posted speed limits).
STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side then you will find it on the inboard side of the tire.
STARTING AND OPERATING Tire Loading and Tire Pressure 333 Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar.
STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the “Tire and Loading Information” placard and in the “Vehicle Loading” section of this manual.
STARTING AND OPERATING 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
STARTING AND OPERATING
STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle. Three primary areas are affected by improper tire pressure: 337 1.
STARTING AND OPERATING 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under inflation also increases tire rolling resistance and results in higher fuel consumption. Tire Inflation Pressures The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar. 3.
STARTING AND OPERATING check tire pressure. Do not make a visual judgement when determining proper inflation. Radial tires may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.
STARTING AND OPERATING Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle operation.
STARTING AND OPERATING 341 WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck, and do not let anyone near a spinning wheel no matter what the speed. Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced.
STARTING AND OPERATING Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline. • Driving style Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure.
STARTING AND OPERATING 343 WARNING! CAUTION! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death.
STARTING AND OPERATING Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-ofbalance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear. TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “Class S” specifications. Chains must be the proper size for the vehicle, as recommended by the chain manufacturer. In addition, only install tire chains on P235/65R17 or smaller tires.
STARTING AND OPERATING These cautions apply to all chain traction devices, including link and cable (radial) chains. TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate at different loads and perform different steering, handling, and braking functions. For these reasons, they wear at unequal rates, and develop irregular wear patterns. These effects can be reduced by timely rotation of tires.
STARTING AND OPERATING TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED • The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. • The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure.
STARTING AND OPERATING once the system receives the updated tire pressures. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. − For example, your vehicle may have a recommended cold (parked for more than 3 hours) placard pressure of 33 psi (227 kPa).
STARTING AND OPERATING NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure. • Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.
STARTING AND OPERATING The matching full size spare wheel and tire assembly (if equipped) has a tire pressure monitoring sensor. The matching full size spare can be used in place of any of the four road tires. The TPMS will only monitor the pressure in the full size spare when it is used in place of a road tire. Otherwise, a spare with a pressure below the lowpressure limit will not cause the Tire Pressure Monitoring Telltale Light to illuminate or the chime to sound.
STARTING AND OPERATING 3. Lots of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. NOTE: Vehicles with Full Size Spare 1. The matching full size spare wheel and tire assembly has a tire pressure monitoring sensor that can be monitored by the TPMS. 2.
STARTING AND OPERATING the low-pressure warning limit in any of the four active road tires. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Premium System — If Equipped The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the Receiver Module.
STARTING AND OPERATING will sound when tire pressure is low in one or more of the four active road tires. In addition, the Electronic Vehicle Information Center (EVIC) will display a graphic showing the pressure values of each tire with the low tire pressure values flashing. Should this occur, you should stop as soon as possible, and inflate the tires with low pressure (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard pressure value.
STARTING AND OPERATING 353 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists.
STARTING AND OPERATING upon the next ignition key cycle, a chime will sound and the TPM Telltale Light will turn ON. In addition, the EVIC will display a Low Pressure message and a graphic showing the low tire pressure value flashing. 3. After driving the vehicle for up to 10 minutes above 15 mph (25 km/h) the TPM Telltale Light will turn OFF, as long as no tire pressure is below the low-pressure warning limit in any of the four active road tires. 4.
STARTING AND OPERATING 5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically. In addition, the TPM Telltale Light will turn OFF and the graphic in the EVIC will display a new pressure value instead of dashes (- -), as long as no tire pressure is below the low-pressure warning limit in any of the four active road tires.
STARTING AND OPERATING high speeds can cause damage and immediate service is required. Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experience these symptoms, try another brand of gasoline before considering service for the vehicle.
STARTING AND OPERATING Problems that result from using methanol/gasoline or E85 Ethanol blends are not the responsibility of the manufacturer. While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT.
STARTING AND OPERATING • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance, and damage the emission control system. • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. Contact your dealer for service assistance.
STARTING AND OPERATING 359 • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. • Keep the trunk closed when driving your vehicle to prevent carbon monoxide and other poisonous exhaust gases from entering the vehicle.
STARTING AND OPERATING CAUTION! WARNING! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • A poorly fitting gas cap could let impurities into the fuel system. • Never add fuel to the vehicle when the engine is running. • A poorly fitting gas cap may cause the Malfunction Indicator Light to turn on.
STARTING AND OPERATING NOTE: • Tighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is tightened properly. The Malfunction Indicator Light in the instrument cluster may turn on if the gas cap is not secured properly. Make sure that the gas cap is tightened each time the vehicle is refueled. • When the fuel nozzle “clicks” or shuts off, the fuel tank is full.
STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) The GVWR is the total permissible weight of your vehicle including driver, passengers, vehicle, options, trailer tongue weight, and cargo. The label also specifies maximum capacities of front and rear axle systems (GAWR). Total load must be limited, so GVWR, and front and rear GAWR are not exceeded.
STARTING AND OPERATING Curb Weight The curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle. The front and rear curb weight values are determined by weighing your vehicle on a commercial scale before any occupants or cargo are added.
STARTING AND OPERATING TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer, carefully review this information to tow your load as efficiently and safely as possible. To maintain warranty coverage, follow the requirements and recommendations in this manual concerning vehicles used for trailer towing.
STARTING AND OPERATING Gross Combination Weight Rating (GCWR) The Gross Combination Weight Rating (GCWR) is the total permissible weight of your vehicle and trailer when weighed in combination. (Note that GCWR ratings include a 150 lbs (68 kg) allowance for the presence of a driver). Gross Axle Weight Rating (GAWR) The Gross Axle Weight Rating (GAWR) is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly.
STARTING AND OPERATING Weight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kinds of hitches are the most popular on the market today and they’re commonly used to tow small- and medium-sized trailers. Weight-Distributing Hitch A weight-distributing system works by applying leverage through spring (load) bars.
STARTING AND OPERATING 367 5 Weight Distributing Hitch System Improper Adjustment of Weight Distributing System
STARTING AND OPERATING Trailer Hitch Classification Your vehicle is capable of towing trailers up to 2,000 lbs (907 kg) without added equipment or alterations to the standard equipment. Your vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional Trailer Tow Prep Package. See your dealer for package content.
STARTING AND OPERATING 369 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission 3.7L/6-Speed Manual 3.7L/6-Speed Manual 3.7L/Automatic 3.7L/Automatic 3.7L/Automatic w/ Cooler 3.7L/Automatic w/Cooler Max. GTW Tongue Wt. (Gross Trailer Wt.) (See Note) 4x2 40 Sq. Ft. (3.72 3,500 lbs (1 587 kg) 350 lbs (159 kg) square meters) 4x4 8,750 lbs (3 969 kg) 40 Sq. Ft. (3.
STARTING AND OPERATING When Towing Trailers with Gross Trailer Weight (GTW) between 3,500 Lbs (1 588 kg) and 5,000 Lbs (2 268 kg) The following chart provides maximum trailer weight ratings towable for the following engine/transmission combinations, ONLY if using a weight distributing hitch. Engine/ Transmission 3.7L/ Automatic w/ Cooler 3.7L/ Automatic w/Cooler Model 4x2 GCWR (Gross Combined Wt. Rating) 9,850 lbs (4 468 kg) 4x4 10,100 lbs (4 581 kg) Frontal Area 64 Sq. Ft. (5.
STARTING AND OPERATING 371 Trailer and Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer accidents.
STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the “Tire and Loading Information” placard for the maximum combined weight of occupants and cargo for your vehicle.
STARTING AND OPERATING • When hauling cargo, or towing a trailer, do not overload your vehicle or trailer. Overloading can cause a loss of control, poor performance, or damage to brakes, axle, engine, transmission, steering, suspension, chassis structure, or tires. • Safety chains must always be used between your vehicle and trailer. Always connect the chains to the frame or hook retainers of the vehicle hitch. Cross the chains under the trailer tongue and allow enough slack for turning corners.
STARTING AND OPERATING − Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “Tires–General Information” in this section for information on tire pressures and for proper tire inflation procedures. − Also, check the trailer tires for proper tire inflation pressures before trailer usage. − Check for signs of tire wear or visible tire damage before towing a trailer.
STARTING AND OPERATING CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes, and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. WARNING! Do not connect trailer brakes to your vehicle’s hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have an accident.
STARTING AND OPERATING The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations.
STARTING AND OPERATING Towing Tips Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage. Towing Tips — Automatic Transmission The “D” range can be selected when towing. However, if frequent shifting occurs while in this range, you will want to activate the TOW/HAUL feature.
STARTING AND OPERATING − Use speed control in flat terrain and with light loads to maximize fuel efficiency. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing Tips — Cooling System To reduce potential for engine and transmission overheating, take the following actions: Towing – 2WD Models Recreational towing is not allowed. − City Driving When stopped for short periods of time, put transmission in neutral and increase engine idle speed. − Highway Driving Reduce speed.
STARTING AND OPERATING 379 CAUTION! WARNING! • The Automatic Transmission must be in “P” (Park) position for recreational towing. The Manual Transmission (if equipped) must be in gear (for example, 4th gear) for recreational towing. Failure to follow these procedures can cause severe transmission and/or transfer case damage. • Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing.
STARTING AND OPERATING 3. Turn the ignition switch to the ON position. 11. Shut OFF the engine. 4. Depress the brake pedal. 12. Turn the ignition switch to the unlocked OFF position. 5. Shift the transmission to “N” (Neutral) (automatic transmission), or depress the clutch pedal (manual transmission). 6. Use the point of a ballpoint pen or similar object to depress the recessed transfer case Neutral (N) button for 4 seconds.
STARTING AND OPERATING 381 • The ignition switch must be in the ON position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON position, the shift will not take place and no position indicator lights will be on or flashing. Shifting Out of Neutral (N) Perform the following procedure to prepare your vehicle for normal usage: • Flashing Neutral (N) position indicator light indicates that shift requirements have not been met. 2.
STARTING AND OPERATING indicator light turns off (approximately 1 second). After the Neutral (N) button is released, the transfer case will shift to the position identified by the selector switch. 8. Start the engine. 9. Shift the transmission into “D” (Drive) (automatic transmission) or into 1st gear and momentarily release the clutch (manual transmission) to verify that the transfer case has engaged. 10. Set the parking brake. 11.
WHAT TO DO IN EMERGENCIES CONTENTS m If Your Engine Overheats . . . . . . . . . . . . . . . . . 384 ▫ Preparations For Jacking . . . . . . . . . . . . . . . . 387 m Jacking And Tire Changing . . . . . . . . . . . . . . . . 385 ▫ Jacking Instructions . . . . . . . . . . . . . . . . . . . . 388 ▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . . . 385 m Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . 390 ▫ Spare Tire Stowage . . . . . . . . . . . . . . . . . . . .
WHAT TO DO IN EMERGENCIES IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce the potential for overheating by taking the appropriate action. • On the highways — Slow down. • In city traffic — While stopped, put transmission in N (Neutral), but do not increase engine idle speed. NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off.
WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. 385 Jack Location The scissor-type jack and tire changing tools are located in the cargo compartment behind a trim cover on the left rear trim panel.
WHAT TO DO IN EMERGENCIES Spare Tire Stowage The spare tire is stowed underneath the rear of the vehicle and is held in place by a cable winch mechanism. Spare Tire Removal Fit the jack handle extension over the drive nut. Use the Lug Wrench to rotate the nut counter clockwise until the spare is on the ground with enough slack in the cable to allow you to pull the tire out from under the vehicle.
WHAT TO DO IN EMERGENCIES CAUTION! The winch mechanism is designed for use with the jack extension tube only. Use of an air wrench or other power tools is not recommended and they can damage the winch. When the spare is clear, tilt the retainer at the end of the cable, and pull it through the center of the wheel. Preparations For Jacking • Park the vehicle on a firm level surface as far from the edge of the roadway as possible. Avoid icy or slippery areas.
WHAT TO DO IN EMERGENCIES Jacking Instructions 1. Remove spare tire. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 3. Remove jack and tools from mounting bracket. Assemble the tools by connecting the driver to the extension, and then to the lug wrench. 4. Locate the jack as shown. For the front tires, place it in the notch on the body weld seam behind wheel to be changed.
WHAT TO DO IN EMERGENCIES 389 WARNING! Raising the vehicle higher than necessary can make the vehicle less stable and cause an accident. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the lug nuts and wheel. Rear Jacking Location 5. Raise the vehicle by turning the jack screw to the right. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire.
WHAT TO DO IN EMERGENCIES nuts until each nut has been tightened twice. Correct wheel nut tightness is 130 N·m (95 ft. lbs). If in doubt about the correct tightness, have them checked with a torque wrench by your authorized dealer or at a service station. 10. Lower the jack to it’s fully closed position. WARNING! A loose tire or jack, thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. 11.
WHAT TO DO IN EMERGENCIES 391 1. Wear eye protection and remove all metal jewelry such as watchbands or bracelets that might make an unintended electrical contact. 3. Set the parking brake, place the automatic transmission in PARK (or NEUTRAL for manual transmission), and turn the ignition OFF for both vehicles. 2. When boosting from a battery in another vehicle, park that vehicle within booster cable reach, but without allowing the vehicles to touch. 4.
WHAT TO DO IN EMERGENCIES • You should not try to start your vehicle by pushing or towing. 7. If the vehicle is equipped with Sentry Key Immobilizer, turn the ignition switch to the ON position for 3 seconds before moving the ignition switch to the START position. • Do not connect the cable to the negative post of the discharge battery. The resulting electrical spark could cause the battery to explode. 8.
WHAT TO DO IN EMERGENCIES WARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 393 TOWING A DISABLED VEHICLE Proper towing or lifting equipment is required to prevent damage to your vehicle. Use of safety chains is recommended. Attach towing device to main structural members of the vehicle — not to bumpers or associated brackets.
WHAT TO DO IN EMERGENCIES TOWING METHOD NOTE: The transmission & transfer case must be in “N” Neutral under any towing configuration.
MAINTAINING YOUR VEHICLE CONTENTS m 3.7L Engine Compartment . . . . . . . . . . . . . . . . 398 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . . 405 m Onboard Diagnostic System — OBD II . . . . . . . . 399 ▫ Drive Belts — Check Condition And Tension . . 406 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . . 400 ▫ Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . 406 m Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE ▫ A/C Air Filter — If Equipped . . . . . . . . . . . . 412 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 425 ▫ Power Steering — Fluid Check . . . . . . . . . . . . 412 ▫ Manual Transmission — If Equipped . . . . . . . 426 ▫ Driveline And Steering Component Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . 413 ▫ Transfer Case . . . . . . . . . . . . . . . . . . . . . . . . 426 ▫ Body Lubrication . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE m Replacement Light Bulbs . . . . . . . . . . . . . . . . . 443 m Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . 443 ▫ Headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . 443 ▫ Front Turn Signal And Front Side Marker Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444 ▫ Front Fog Light . . . . . . . . . . . . . . . . . . . . . . 445 397 ▫ Rear Tail/Stop, Turn Signal, And Back-Up Lights . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 3.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
MAINTAINING YOUR VEHICLE Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap in loose, improperly installed, or damaged, a “gASCAP” message will display in the instrument cluster. Tighten the gas cap until a “clicking” sound is heard. This is an indication that the gas cap is properly tightened. Press the trip odometer reset button to turn off the message. If the problem persists, the message will appear the next time the vehicle is started.
MAINTAINING YOUR VEHICLE 2. Turn the ignition to the ON position, but do not crank or start the engine. 3. If you crank or start the engine, you will have to start this test over. 4. As soon as you turn your key to the ON position, you will see your MIL symbol come on as part of a normal bulb check. 5. Approximately 15 seconds later, one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition key or start the engine.
MAINTAINING YOUR VEHICLE REPLACEMENT PARTS Use of genuine Mopart parts for normal/scheduled maintenance and repairs is highly recommended to insure the designed performance. Damage or failures caused by the use of non-Mopart parts for maintenance and repairs will not be covered by the manufacturer’s warranty. DEALER SERVICE Your dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner.
MAINTAINING YOUR VEHICLE 403 These items should be inspected if a malfunction is observed or suspected. Engine Oil Checking Oil Level To assure proper engine lubrication, the engine oil must be maintained at the correct level. The best time to check the engine oil level is about 5 minutes after a fully warmed up engine is shut off or before starting the engine after it has sat overnight. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level readings.
MAINTAINING YOUR VEHICLE Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” in Section 8 of this manual for information on this system. NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or 6 months, whichever occurs first.
MAINTAINING YOUR VEHICLE Lubricants, which do not have both, the engine oil certification mark and the correct SAE viscosity grade number should not be used. Synthetic Engine Oils You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed.
MAINTAINING YOUR VEHICLE Drive Belts — Check Condition and Tension Belt tension is controlled by means of an automatic tensioner. Therefore, no belt tension adjustments are required. However, belt and belt tensioner condition should be inspected periodically and replaced if required. Improper belt tension can cause belt slippage and failure. Low generator belt tension can cause battery failure.
MAINTAINING YOUR VEHICLE WARNING! The air induction system (air cleaner, hoses, etc) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc) removed. Failure to do so can result in serious personal injury.
MAINTAINING YOUR VEHICLE CAUTION! WARNING! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involving engine misfire or other apparent loss of performance, have your vehicle serviced promptly. Continued operation of your vehicle with a severe malfunction could cause the converter to overheat, resulting in possible damage to the converter and the vehicle.
MAINTAINING YOUR VEHICLE To minimize the possibility of catalytic converter damage: • Do not shut off the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any ignition coil connectors disconnected for prolonged periods. • Do not idle the engine for prolonged periods during very rough idle or malfunctioning operating conditions.
MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post.
MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. 411 WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system.
MAINTAINING YOUR VEHICLE Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by dealers or other service facilities using recovery and recycling equipment. NOTE: Use only manufacturer approved A/C System Sealers, Stop Leak Products, Seal Conditioners, Compressor Oil, and Refrigerants.
MAINTAINING YOUR VEHICLE If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type. NOTE: Upon initial start-up in cold weather, the power steering pump may make noise for a short period of time. This is due to the cold, thick fluid in the steering system. This noise should be considered normal, and does not in any way damage the steering system.
MAINTAINING YOUR VEHICLE Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Make sure that they are not frozen to the glass before turning them on to avoid damaging the blade. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc.
MAINTAINING YOUR VEHICLE WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • You or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, don’t open the hood until the radiator has had time to cool.
MAINTAINING YOUR VEHICLE properly, the coolant will begin to drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. 417 CAUTION! Cooling System — Drain, Flush, and Refill The system should be drained, flushed, and refilled at the intervals shown in the “Maintenance Schedule” in Section 8 of this manual. • Mixing of coolants other than specified HOAT engine coolants, may result in engine damage and may decrease corrosion protection.
MAINTAINING YOUR VEHICLE Adding Coolant Your vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Years or 100,000 miles (160 000 km) before replacement. To prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. Please review these recommendations for using Hybrid Organic Additive Technology (HOAT) coolant.
MAINTAINING YOUR VEHICLE The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
MAINTAINING YOUR VEHICLE service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points To Remember NOTE: When the vehicle is stopped after a few miles (kilometers) of operation, you may observe vapor coming from the front of the engine compartment.
MAINTAINING YOUR VEHICLE • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for summer or winter operation. If replacement is ever necessary, install ONLY the correct type thermostat. Other designs may result in unsatisfactory cooling performance, poor gas mileage, and increased emissions.
MAINTAINING YOUR VEHICLE Brake System In order to assure brake system performance, all brake system components should be inspected periodically. Suggested service intervals can be found in the “Maintenance Schedule” in Section 8 of this manual. brittle rubber, cracking, tears, cuts, abrasions, and excessive swelling suggest deterioration of the rubber. Particular attention should be made to examining those hose surfaces nearest to high heat sources, such as the exhaust manifold.
MAINTAINING YOUR VEHICLE • Inspect the brake hoses whenever the brake system is serviced and at every engine oil change. Inspect hydraulic brake hoses for surface cracking, scuffing, or worn spots. If there is any evidence of cracking, scuffing, or worn spots, the hose should be replaced immediately! Eventual deterioration of the hose can take place resulting in a possibility of a burst failure. 423 Check the fluid level in the master cylinder when performing underhood services.
MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. Do not allow petroleum-base fluid to contaminate the brake fluid. Seal damage may result. • Use of a brake fluid that has a lower initial boiling point than the recommended product or a brake fluid that is unidentified as to FMVSS specification may result in sudden brake failure during hard prolonged braking.
MAINTAINING YOUR VEHICLE Automatic Transmission Fluid Level Check Your vehicle is equipped with a capped dipstick tube that is sealed and it should not be tampered with. Your authorized dealer has the proper tools to ensure that the fluid level is set properly. CAUTION! Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder.
MAINTAINING YOUR VEHICLE Manual Transmission — If Equipped Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more than 3/16” (4.76 mm) below the bottom of the hole. Add fluid, if necessary, to maintain the proper level. Lubricant Selection Use only manufacturer’s recommended manual transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
MAINTAINING YOUR VEHICLE 427 CAUTION! Do not over-tighten the plugs. You could damage them and cause a leak. Lubricant Selection Use only manufacturer’s recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type. Adding Fluid Fluid should be added only at filler hole until fluid begins to run out of the hole. Draining Fluid First remove fill plug (2), then drain plug (3). Recommended tightening torque for drain and fill plugs is 15–25 ft.lbs.
MAINTAINING YOUR VEHICLE NOTE: Be sure to follow the “police, taxi, fleet, off-road, or frequent trailer towing” maintenance interval if applicable. Front/Rear Axle Fluid Fluid Level Check The lubricant level should be at bottom edge of the oil fill hole. Adding Fluid Add lubricant only at the fill hole and only to the level specified above. Lubricant Selection Use only manufacturer’s recommended lubricant. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
MAINTAINING YOUR VEHICLE hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and underbody protection. 429 • Bird droppings. Washing The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. • Wash your vehicle regularly. Always wash your vehicle in the shade using Mopart Car Wash or a mild car wash soap, and rinse the panels completely with clear water.
MAINTAINING YOUR VEHICLE CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month.
MAINTAINING YOUR VEHICLE 431 Wheel and Wheel Trim Care All wheels and wheel trim, especially aluminum and chrome plated wheels should be cleaned regularly with a mild soap and water to prevent corrosion. To remove heavy soil and/or excessive brake dust, use Mopart Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner. Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Only Mopart or equivalent is recommended. Do not use oven cleaner.
MAINTAINING YOUR VEHICLE use polishes, oils, cleaning fluids, solvents, detergents, or ammonia-based cleaners to clean leather upholstery. Application of a leather conditioner is not required to maintain the original condition. WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm.
MAINTAINING YOUR VEHICLE 433 To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution followed by rinsing. Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic.
MAINTAINING YOUR VEHICLE Replace the belts if they appear frayed or worn or if the buckles do not work properly. SKY SLIDERT TOP CARE Immediate removal of any contaminant is recommended. Regular washing of the top will enhance its life and appearance, and make successive cleaning easier. Do not subject the top to excessive heat. Frequently vacuum the top and storage compartment. Washing Hand washing or an automatic car wash with a soft cloth system is preferred.
MAINTAINING YOUR VEHICLE • Allow the top to dry before opening. Vacuuming the top with a wet/dry shop vacuum will decrease the top’s drying time, ensure removal of all dirt, and delete streaks in the material. • Multiple cleanings may be necessary to remove stubborn stains. If stains persist, contact your local dealership for further suggestions. CAUTION! Never use an abrasive type cleaner or bleaches. Cleaners should not contain silicones, organic solvents, petroleum distillates, or plasticizers.
MAINTAINING YOUR VEHICLE CAUTION! Avoid getting Scotchguardt on the surrounding weather strips, moldings, paint, or glass. Damage to these items might occur. Weather Strip Care Lubricate the weather strips periodically with Mopar Weather Strip Lubricant (part number 4773427), to keep them soft and pliable. FUSES (INTEGRATED POWER MODULE) The Totally Integrated Power Module (TIPM) is located in the engine compartment near the battery. This center contains cartridge fuses, mini fuses and relays.
MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse J3 40 Amp Green J4 25 Amp White J5 25 Amp White J6 40 Amp Green J7 J8 J9 J10 Mini Fuse Description — Rear Door Modules — Driver Door Node — Passenger Door Node — Anti-Lock Brake System (ABS) Pump/ESP - if equipped Anti-Lock Brake System (ABS) Valve/ESP - if equipped Power Seats - if equipped PZEV/Flex Fuel - if equipped — 30 Amp Pink — 40 Amp Green 40 Amp Green — — — — Cavity Cartridge Mini Fuse Fuse J11 — — J13 60 Amp — Yellow J14 40 Amp — Gre
MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Fuse Fuse J21 20 Amp — Blue J22 25 Amp — White M1 — 15 Amp Blue M2 — M3 M4 — — M5 — 20 Amp Yellow — 10 Amp Red 25 Amp Natural Description Front Washer/Rear Washer - if equipped Sunroof Module - if equipped Stop Light Switch Feed — Center High Mounted Stop Light (CHMSL) Trailer Lighting - if equipped — Trailer Tow - if equipped Power Inverter – if equipped Cavity Cartridge Mini Fuse Fuse M6 — 20 Amp Yellow M7 — M8 — M9 M10 — — 20 Amp Yellow
MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Fuse Fuse M11 — 10 Amp Red M12 — M13 — M14 — 30 Amp Green 20 Amp Yellow — Description Automatic Temperature Control (ATC) if equipped Radio/Amplifier - if equipped Cabin Compartment Node (CCN)/Wireless Control Module (WCM)/MultiFunction Control Switch — Cavity Cartridge Mini Fuse Fuse M15 — 20 Amp Yellow M16 — 10 Amp Red 439 Description Multi-Function Control Switch/Cabin Compartment Node (CCN)/Steering Column Control Module (SCM)/Rear View Mirro
MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Fuse Fuse M17 — 15 Amp Blue M18 M19 — — 15 Amp Blue 25 Amp Natural Description Exterior Lighting — Left Front Park & Side Marker, Left Tail & Running, License Lights Exterior Lighting — Right Front Park & Side Marker, Right Tail & Running Lights Auto Shut Down (ASD) #1 & #2 Cavity Cartridge Mini Fuse Fuse M20 — 15 Amp Blue M21 — M22 — M23 — M25 — 20 Amp Yellow 10 Amp Red 10 Amp Red 20 Amp Yellow Description Interior Lighting/ Steering Wh
MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Fuse Fuse M26 — 10 Amp Red M27 — 10 Amp Red M28 — M29 — 10 Amp Red 10 Amp Red 15 Amp Blue M30 M31 — — 20 Amp Yellow Description Power Mirror Switch/ Driver Window Switch Ignition Switch/ Wireless Control Module (WCM)/ Steering Column Lock - if equipped Powertrain Control Module (PCM) Occupant Classification Module (OCM) Rear Wiper Module if equipped/ Diagnostic Link Back-Up Lights Cavity Cartridge Mini Fuse Fuse M32 — 10 Amp Red M33 — 10 Amp Red
MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Fuse Fuse M37 — 10 Amp Red M38 — 25 Amp Natural Description CAUTION! Anti-Lock Brake System (ABS)/Electronic Stability Program (ESP) Module/Stop Light Switch Door & Liftgate Lock/Unlock Motors • When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical system failure.
MAINTAINING YOUR VEHICLE REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb No. Cargo Light . . . . . . . . . . . . . . . . . . . . . . . . WL212–2 Overhead Console Light. . . . . . . . . . . . . . PLW214–2A Reading Light . . . . . . . . . . . . . . . . . . . . . . . WL212–2 LIGHT BULBS — Exterior Bulb No. Headlight . . . . . . . . . . . . . . . . . . . . . . . . . . 9008 H13 Front Park/Turn Signal Light . . . . . . . . . . . . . 3757AK Front Side Marker Light. . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 6. Install the bulb and connector assembly into the headlight housing and rotate the lock ring clockwise to lock it in place. 7. Close the hood. Front Turn Signal and Front Side Marker Lights 1.
MAINTAINING YOUR VEHICLE 445 5. Install the bulb and socket assembly into the into the fog light housing, and rotate the connector clockwise to lock it in place. Front Fog Light 1. Open the hood. 2. Reach behind the headlight housing to access the bulb. 3. Rotate the bulb’s socket counterclockwise, and remove the bulb and socket assembly from the fog light housing. 4. Pull the bulb out of the socket and insert the replacement bulb. CAUTION! Do not touch the new bulb with your fingers.
MAINTAINING YOUR VEHICLE 5. Remove the two screws that fasten the back plate to the taillight housing. 8. Install the back plate and screws into the taillight housing. 6. Separate the back plate from the taillight housing. 9. Connect the electrical connector. 7. Pull the appropriate bulb(s) out of the back plate and insert the replacement bulb(s). 10. Install the taillight housing and screws. 11. Close the liftgate.
MAINTAINING YOUR VEHICLE 447 FLUID CAPACITIES Fuel (approximate) 3.7 Liter Engine Engine Oil-With Filter SAE 5W-20, API Certified Cooling System * Mopart Antifreeze/Coolant 5 Year/100,000 Mile Formula or equivalent. * Includes heater and coolant recovery bottle filled to MAX level. U.S. Metric 19.5 Gallons 73.8 Liters 5 Qts 4.
MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Spark Plugs Oil Filter Fuel Selection Fluids, Lubricants, and Genuine Parts Mopart Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Use API Certified SAE 5W-20 Engine Oil meeting the requirements of DaimlerChrysler Material Standard MS-6395. Refer to the engine oil fill cap for correct SAE grade. ZFR6F-11 (Gap.043 in [1.
MAINTAINING YOUR VEHICLE 449 Chassis Component Automatic Transmission Manual Transmission Transfer Case Front Axle Rear Axle Brake Master Cylinder/Manual Transmission Clutch System Power Steering Reservoir Fluids, Lubricants, and Genuine Parts Mopart ATF+4, Automatic Transmission Fluid. Mopart Manual Transmission Lubricant or equivalent (meeting the requirements of DaimlerChrysler Material Standard MS-9224) Mopart ATF+4, Automatic Transmission Fluid.
MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance . . . . . . . . 452 m Maintenance Schedule . . . . . . . . . . . . . . . . . . . 452 ▫ Required Maintenance Intervals . . . . . . . . . . .
M A I N T E N A N C E 452 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been 6 months since your last oil change even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10,000 km) or 6 months, whichever comes first.
M A I N T E N A N C E S C H E D U L E S 8 454 MAINTENANCE SCHEDULES Once a Month At Each Oil Change • Check tire pressure and look for unusual wear or damage. • Change the engine oil filter. • Inspect the battery and clean and tighten the terminals as required. • Check the fluid levels of coolant reservoir, brake master cylinder, and power steering, and add as needed. • Check all lights and other electrical items for correct operation. • Inspect the brake hoses and lines.
MAINTENANCE SCHEDULES 455 M Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Change the engine oil and engine oil filter. Rotate the tires. If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. Inspect the brake linings, and replace if necessary. Replace the air conditioning air filter (if equipped). Inspect the front & rear axle lubricant.
M 456 MAINTENANCE SCHEDULES A I N T E N Maintenance Items A N Inspect the front suspension, tie rod ends and boot C seals, and replace if necessary. E Replace the engine air cleaner filter.
MAINTENANCE SCHEDULES 457 M Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Change the transfer case fluid if using your vehicle for any of the following: police, taxi, fleet, off-road, or frequent trailer towing. Inspect and replace the PCV valve if necessary. Flush and replace the engine coolant. Change the automatic transmission fluid & filter. Replace the accessory drive belt(s).
M 458 MAINTENANCE SCHEDULES A I N WARNING! T E You can be badly injured working on or around a N motor vehicle. Do only that service work for which A N you have the knowledge and the right equipment. If C you have any doubt about your ability to perform a E S C H E D U L E S 8 service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS m Suggestions For Obtaining Service For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460 ▫ Prepare For The Appointment . . . . . . . . . . . . 460 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 460 m Reporting Safety Defects . . . . . . . . . . . . . . . . . . 463 ▫ In Canada . . . . . . . . . . . . . . . . . . . . . . . . . . 464 m Publication Order Forms . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty, discuss additional charges with the service manager. Keep a maintenance log of your vehicle’s service history. This can often provide a clue to the current problem.
IF YOU NEED CONSUMER ASSISTANCE technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely manner. This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its Customer Center. Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the United States can communicate with the manufacturer by dialing 1–800–380–CHRY.
IF YOU NEED CONSUMER ASSISTANCE WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. WARRANTY INFORMATION (U.S.
IF YOU NEED CONSUMER ASSISTANCE To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), or go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov. PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below.
IF YOU NEED CONSUMER ASSISTANCE • Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computercontrolled vehicle systems and features. They show exactly how to find and correct problems the first time, using step-by-step troubleshooting and driveability procedures, proven diagnostic tests and a complete list of all tools and equipment. • Owner’s Manuals.
IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories established by the National highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car. All Passenger Car Tires Must Conform to Federal Safety Requirements in Addition to These Grades.
IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . 308 ABS (Anti-Lock Brake System) . . . . . . . . . 195,310,315 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 418 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 359 Adding Rear Washer Fluid . . . . . . . . . . . . . . . . . 181 Adding Washer Fluid . . . . . . . . . . . . . . . . . . 145,181 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Auto Unlock, Doors . . . . . . . . . . . . . . . . . . . . . . . 32 Automatic Dimming Mirror . . . . . . . . . . . . . . . . . 88 Automatic Door Locks . . . . . . . . . . . . . . . . . . . 31,32 Automatic Headlights . . . . . . . . . . . . . . . . . . . . 134 Automatic Oil Change Indicator . . . . . . . . . . 201,209 Automatic Temperature Control (ATC) . . . . . . . . . 264 Automatic Transaxle Special Additives . . . . . . . . . . . . . . . . . . . . . . 425 Automatic Transmission . . . . . . . . . .
INDEX Brake, Parking . . . . . . . . . . . . . . . . . . . . . . . . . . 308 Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . . . 310,315 Fluid Check . . . . . . . . . . . . . . . . . . . . . . . 423,449 Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 Master Cylinder . . . . . . . . . . . . . . . . . . . . . . . 423 Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308 Warning Light . . . .
INDEX Chart, Tire Sizing . . . . . . . . . . . . . . . . . . . . . . . . 330 Check Engine Light (Malfunction Indicator Light) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Checking Your Vehicle For Safety . . . . . . . . . . . . . 79 Checks, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Child Restraint . . . . . . . . . . . . . . . . . . . . 69,70,74,76 Child Restraint Tether Anchors . . . . . . . . . . . . . 73,74 Child Safety Locks . . . . . . . . . . . . . . . . .
INDEX Temperature Gauge . . . . . . . . . . Corrosion Protection . . . . . . . . . . Crankcase Emission Control System Cruise Light . . . . . . . . . . . . . . . . Cup Holder . . . . . . . . . . . . . . . . . Customer Assistance . . . . . . . . . . ... ... .. ... ... ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 428 409 202 172 460 Data Recorder, Event . . . . . . . . . . . . . . . . . . . . . .
INDEX Electrical Power Outlets . . . . . . . . . . . . . . . . . . . 169 Electronic Brake Control System . . . . . . . . . . . . . 314 Anti-Lock Brake System . . . . . . . . . . . . . . . . . 315 Brake Assist System . . . . . . . . . . . . . . . . . . . . 316 Electronic Roll Mitigation . . . . . . . . . . . . . . . . 317 Electronic Stability Program . . . . . . . . . . . . . . . 324 Traction Control System . . . . . . . . . . . . . . . . . 316 Electronic Roll Mitigation (ERM) . . . . . . . . . . . . .
INDEX Overheating . . . . . . . . . . . . . . . . . . . . . . . . . . 384 Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 Temperature Gauge . . . . . . . . . . . . . . . . . . . . . 198 Engine Oil Viscosity . . . . . . . . . . . . . . . . . . . . . . 404 Engine Oil Viscosity Chart . . . . . . . . . . . . . . . . . 404 Enhanced Accident Response Feature . . . . . . . . . . 65 Entry System, Illuminated . . . . . . . . . . . . . . . . . . 20 Ethanol . . . . . . . . . . . . . . . .
INDEX Power Steering . . . . . . . . . . . . . . . . . . . . . . . . 412 Fluids, Lubricants and Genuine Parts . . . . . . . . . . 448 Fog Light Service . . . . . . . . . . . . . . . . . . . . . . . . 445 Fog Lights . . . . . . . . . . . . . . . . . . . . 133,136,194,445 Folding Rear Seat . . . . . . . . . . . . . . . . . . . . . . . . 124 Four Wheel Drive Shifting . . . . . . . . . . . . . . . . . . . . . 292,294,298,300 Systems . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Gauges Coolant Temperature . . . . . . . . . . . . . . . . . . . . 198 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . 194 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . 195 Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . 283,291 General Information . . . . . . . . . . . . . . . 17,26,118,355 General Maintenance . .
INDEX High Beam/Low Beam Select (Dimmer) Switch . . 137 Hill Descent Control . . . . . . . . . . . . . . . . . . . . . 322 Hill Descent Control Indicator . . . . . . . . . . . . 196,322 Hill Start Assist . . . . . . . . . . . . . . . . . . . . . . . . . 319 Hitches Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . 368 Holder, Coin . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 Holder, Cup . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . . 390 Key, Programming . . . . . Key, Replacement . . . . . Key, Sentry (Immobilizer) Key-In Reminder . . . . . . Keyless Entry System . . . Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Fog . . . . . . . . . . . . . . . . . . . . . . . . . . 136,194,445 Four-Wheel Drive Indicator . . . . 196,197,200,295,301 Headlight Switch . . . . . . . . . . . . . . . . . . . . . . 133 Headlights . . . . . . . . . . . . . . . . . . . . . . . . 133,443 Headlights On Reminder . . . . . . . . . . . . . . . . . 135 Headlights On With Wipers . . . . . . . . . . . . 134,143 High Beam . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Loading Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 361 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Auto Unlock . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Automatic Door . . . . . . . . . . . . . . . . . . . . . . . . 31 Child Protection . . . . . . . . . . . . . . . . . . . . . . . . 33 Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Electric Remote . . . . . . . . . . . . . . . . . . . . . . . . 90 Exterior Folding . . . . . . . . . . . . . . . . . . . . . . . . 90 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Outside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Rearview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Vanity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Modifications/Alterations, Vehicle . . . . . . . . . . . . .
INDEX Oil Filter, Change . . . . . . . . . . . . . . . . . . . . . . . . 405 Onboard Diagnostic System . . . . . . . . . . . . . . 399,400 Opener, Garage Door (HomeLinkt) . . . . . . . . . . . 155 Operating Precautions . . . . . . . . . . . . . . . . . . . . 399 Outside Rearview Mirrors . . . . . . . . . . . . . . . . . . 89 Overdrive . . . . . . . . . . . . . . . . . . . . . . . . . . 202,285 Overheating, Engine . . . . . . . . . . . . . . . . . . . 198,384 Owner’s Manual (Operator Manual) . . . . .
INDEX Power Steering Fluid . . . . . . . . . . . . . . . . . . 412,449 Pregnant Women and Seat Belts . . . . . . . . . . . . . . 50 Preparation for Jacking . . . . . . . . . . . . . . . . . . . . 387 Pretensioners Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Programmable Electronic Features . . . . . . . . . . . . 216 Programming Transmitters (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Radial Ply Tires . . . . . . . . . . . . . . .
INDEX Remote Keyless Entry (RKE) . . . . . . . . . . . . . . . . . 20 Remote Sound System (Radio) Controls . . . . . . . . 258 Remote Starting System . . . . . . . . . . . . . . . . . . . . 27 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . . . . 443 Replacement Keys . . . . . . . . . . . . . . . . . . . . . . . . 16 Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . 402 Replacement Tires . . . . . . . . . . . . . . . . . . . . . . . 342 Reporting Safety Defects . . . . . . . .
INDEX Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 Shoulder Belt Anchorage . . . . . . . . . . . . . . . . . . 46 Untwisting Procedure . . . . . . . . . . . . . . . . . . . . 47 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432 Easy Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 Head Restraints . . . . . .
INDEX Side View Mirror Adjustment . . . . . . . . . . . . . . . . 89 Side Window Demisters (Defrosters) . . . . . . . . . . 271 Signals, Turn . . . . . . . . . . . . . . . . . 82,136,194,444,445 Sky Slider Power Roof . . . . . . . . . . . . . . . . . 164,434 Snow Chains (Tire Chains) . . . . . . . . . . . . . . . . . 344 Sound Systems (Radio) . . . . . . . . . . . . . . . . . . . . 237 Spare Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 Spark Plugs . . . . . . . . . . . . . . . .
INDEX Sway Control, Trailer . . . . . . . . . . . . . . . . . . . . . 318 Synthetic Engine Oil . . . . . . . . . . . . . . . . . . . . . . 405 System, Navigation . . . . . . . . . . . . . . . . . . . . . . 237 System, Remote Starting . . . . . . . . . . . . . . . . . . . . 27 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 Temperature Control, Automatic (ATC) . . . . . . . . 264 Temperature Gauge, Engine Coolant . . . . . . . . . . 198 Tether Anchor, Child Restraint . . . . . . . . .
INDEX Tread Wear Indicators . . . . . . . . . . . . . . . . . . . 341 To Open Hood . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Tongue Weight/Trailer Weight . . . . . . . . . . . . . . 371 Torque Converter Clutch . . . . . . . . . . . . . . . . . . 287 Tow/Haul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 Tow/Haul Indicator Light . . . . . . . . . . . . . . . 196,286 Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286,364 Behind a Motor Home . . . . . . . . .
INDEX Transmitter Programming (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Transmitter, Remote Keyless Entry (RKE) . . . . . . . . 20 Tread Wear Indicators . . . . . . . . . . . . . . . . . . . . 341 Trip Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 200 Trip Odometer Reset Button . . . . . . . . . . . . . . . . 199 Turn Signals . . . . . . . . . . . . . . . . 133,136,194,444,445 UConnect™ (Hands-Free Phone) . . . . . . . . . . .
INDEX Wheel Alignment and Balance . . . . . . . . . . . . . . . 343 Wheel and Wheel Trim . . . . . . . . . . . . . . . . . . . . 431 Wheel and Wheel Trim Care . . . . . . . . . . . . . . . . 431 Wheel Mounting . . . . . . . . . . . . . . . . . . . . . . . . 389 Wind Buffeting . . . . . . . . . . . . . . . . . . . . . 39,163,168 Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . 271 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Power . . . . . . . . . . . . . . . .
INTRODUCTION INTRODUCTION ROLLOVER WARNING HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS / ALTERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key RemovalKey-In-Ignition ReminderSENTRY KEY Replacement KeysCustomer Key ProgrammingGeneral InformationSTEERING WHEEL LOCK - IF EQUIPPED To Manually Lock the Steering WheelTo Release the Steering Wheel LockSECURITY ALARM SYSTEM - IF EQUIPPED Rearming of the SystemTo Arm the Syste