2008 Wrangler 2008 OWNER’ S MANUAL 81-326-0855 First Edition Printed in U.S.A.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . . 8 䡵 Rollover Warning . . . . . . . . . . . . . . . . . . . . . . . . 5 䡵 Vehicle Identification Number . . . . . . . . . . . . . . . 8 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 6 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION This is a specialized utility vehicle designed for both on-road and off-road use. It can go places and perform tasks for which conventional two-wheel drive enclosed vehicles were not intended. It handles and maneuvers differently from many passenger cars both on-road and off-road, so take time to become familiar with your vehicle. The two-wheel drive utility vehicle was designed for on-road use only.
INTRODUCTION NOTE: After you read the manual, it should be stored in the vehicle for convenient reference and remain with the vehicle when sold so that the new owner will be aware of all safety warnings. When it comes to service, remember that your authorized dealer knows your vehicle best, has the factory-trained technicians and genuine MOPAR威 parts, and is interested in your satisfaction. ROLLOVER WARNING Utility vehicles have a significantly higher rollover rate than other types of vehicles.
6 INTRODUCTION Do not attempt sharp turns or abrupt maneuvers or other unsafe driving actions that can cause loss of vehicle control. Failure to operate this vehicle safely may result in an accident, rollover of the vehicle and serious injury or death. Because of its open-body construction, your vehicle offers less protection than closed vehicles in the event of an accident. Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the U.S.
INTRODUCTION 7 1
8 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . .12 ▫ General Information . . . . . . . . . . . . . . . . . . . .17 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . .12 䡵 Security Alarm System — If Equipped . . . . . . . . .18 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .14 ▫ To Set The Alarm . . . . . . . . . . . . . . . . . . . . . .18 䡵 Steering Wheel Lock . . . . . . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Turn Off “Flash Lights With Lock” . . . . . . . .21 ▫ Power Door Locks — If Equipped . . . . . . . . . .33 ▫ Programming Additional Transmitters . . . . . . . .22 ▫ Automatic Unlock Doors On Exit . . . . . . . . . . .34 ▫ General Information . . . . . . . . . . . . . . . . . . . .23 ▫ Automatic Door Locks . . . . . . . . . . . . . . . . . . .35 ▫ Battery Replacement . . . . . . . . . . . . . . . . . . . .24 䡵 Windows . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Seat Belt Pretensioners . . . . . . . . . . . . . . . . . . .48 䡵 Engine Break-In Recommendations . . . . . . . . . . .75 ▫ Enhanced Seat Belt Use Reminder System (BeltAlert威) . . . . . . . . . . . . . . . . . . . . . . . . . .49 䡵 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 ▫ Seat Belts And Pregnant Women . . . . . . . . . . . .50 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . . .75 ▫ Seat Belt Extender . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The keys for your new vehicle are enclosed in a plastic bag with the key code number on it. If you received your keys without the bag, ask your authorized dealer to give you the number. The key code can also be obtained by your authorized dealer from your vehicle invoice. Ignition Key Removal Manual Transmission — If Equipped 1. Turn the ignition switch to the ACCESSORY (ACC) position. Ignition Key Positions 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Transmission — If Equipped 1. Place the shift lever in the PARK position. 2. Turn the ignition switch to the ACC position. 13 4. Turn the ignition key to the LOCK position, and remove the key. WARNING! Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be injured. Children should be warned not to touch the parking brake, brake pedal, or the shift lever. Do not leave the key in the ignition.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key-In-Ignition Reminder Opening the driver’s door when the key is in the ignition, sounds a signal to remind you to remove the key. To Release the Steering Wheel Lock Insert the key in the ignition, and turn the wheel slightly to the left or right, to disengage the lock. STEERING WHEEL LOCK Your vehicle is equipped with a passive steering wheel lock. This lock prevents steering the vehicle without the ignition key.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 the vehicle. The system will shut the engine off in two seconds if someone uses an invalid key to try to start the engine. longer than 10 seconds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible. NOTE: A key that has not been programmed is also considered an invalid key, even if it is cut to fit the ignition switch lock cylinder for that vehicle.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Replacement Keys NOTE: Only keys that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a Sentry Key威 is programmed to a vehicle, it cannot be programmed to any other vehicle. CAUTION! Always remove the Sentry Keys威 from the vehicle and lock all doors when leaving the vehicle unattended. At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON position within 15 seconds. After 10 seconds, a chime will sound. In addition, the Vehicle Security Alarm Indicator Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key. 4. Insert a blank Sentry Key威 into the ignition switch. Turn the ignition switch to the ON position within 60 seconds.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • This device must accept any interference that may be received, including interference that may cause undesired operation. SECURITY ALARM SYSTEM — IF EQUIPPED This system monitors the vehicle doors, swing gate, and ignition for unauthorized operation. When the alarm is activated, the system provides both audible and visible signals. The horn, headlights, and tail lights will sound/ flash repeatedly for three minutes.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Security Alarm System is designed to protect your vehicle; however, you can create conditions where the system will arm unexpectedly. If you remain in the vehicle and lock the doors with the RKE transmitter, once the system is armed (after 16 seconds), when you pull the door handle to exit, the alarm will sound. If this occurs, press the UNLOCK button on the RKE transmitter to disarm the system.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The line of transmission must not be blocked with metal objects. 4. Test this feature while outside of the vehicle, by pressing the LOCK/UNLOCK button on the key fob. To Unlock the Doors and Swing Gate Press and release the UNLOCK button once to unlock the driver’s door only, or twice to unlock all the doors and swing gate. When the UNLOCK button is pressed, the illuminated entry will initiate and the parking lights will flash twice.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. While the LOCK button is pressed (after four seconds), press the PANIC button. Release both buttons. The “Sound Horn On Lock” feature can be reactivated by repeating this procedure. Using The Panic Alarm To turn the panic alarm feature ON or OFF, press and hold the PANIC button on the key fob for at least one second and release.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Programming Additional Transmitters Vehicles will be shipped from the assembly plants with two key fob transmitters programmed only for that vehicle. A total of eight key fobs can be programmed for your vehicle. Additional key fobs can be programmed to your vehicle through the use of a currently programmed fob.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11. A single chime will be heard. 12. Repeat steps 8 through 10 to program up to six additional key fobs. 13. Turn the ignition to the OFF position. 14. Your vehicle will remain in program mode up to 60 seconds from when the original chime was heard. After 60 seconds, all programmed key fobs function normally. NOTE: If you do not have a programmed RKE key fob, contact your authorized dealer for details.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Battery Replacement The recommended replacement battery is CR2032. NOTE: Perchlorate Material – special handling may apply; See www.dtsc.ca.gov/hazardouswaste/ perchlorate. 1. If the key fob is equipped with a screw, remove the screw. With the key fob buttons facing down, use a flat blade (screwdriver) to pry the two halves of the transmitter apart. Use extreme care not to damage the seal or internal components. Separating RKE Key Fob Halves 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 NOTE: If the key fob is equipped with a screw, reinstall and tighten the screw until snug. REMOTE STARTING SYSTEM — IF EQUIPPED Your vehicle may be equipped with a remote starting system (automatic transmission models only), which will allow the vehicle to be started from distances up to approximately 300 ft (91 m) away from the vehicle using the remote keyless entry key fob which is part of your ignition key.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The park lamps will remain illuminated to indicate that the vehicle has remote started and the engine is running. The lamps will turn off when the ignition is turned to RUN or the remote start is cancelled. To enter the vehicle while the engine is running during a remote start, you must first unlock the vehicle using the UNLOCK button on the key fob.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If any other active warnings including “gATE”, “gASCAP”, “noFUSE”, “CHANgE OIL”, or “ESPOFF” are present, they will be shown in the VF display and will also continue to cycle. If the vehicle is moving, three single chimes will occur, one chime for each complete display cycle (three cycles total). After this, the display will continue to cycle only (no chimes).
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Push down to ensure the half door window is fully seated. 2. Unplug the wiring harness connector under instrument panel. Front Door Removal 1. Remove the hinge pin screws from the upper and lower outside hinges (using a #T50 Torx威 head driver).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Unhook the door strap from the body hook. Be careful not to allow the door to swing fully open as the mirror may damage paint. 29 Rear Door Removal (Four-Door Models) 1. Remove the hinge pin screws from the upper and lower outside hinges (using a #T50 Torx威 head driver). 4. With the door open, lift the door to clear hinge pins from their hinges, and remove door. To reinstall the door(s), perform the previous steps in the opposite order. 2.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Remove the trim access door from the bottom of B-pillar. 5. Unhook the door strap from the body hook. 4. Unplug the wiring harness connector. 6. With the door open, lift the door to clear hinge pins from their hinges, and remove door. To reinstall the door(s), perform the previous steps in the opposite order.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS The vacuum fluorescent (VF) display located in the odometer area displays the word “door” as an indication of a door ajar or door not completely closed. When the vehicle is not moving and the door is ajar or not completely closed, the VF display will show the word “door.” If any other active warnings including “gATE”, “gASCAP”, “noFUSE”, “CHANgE OIL”, or “ESPOFF” are present, they will be shown in the VF display and will also continue to cycle.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Manual Door Locks The front (two-door models) and rear doors (four-door models) are equipped with a rocker-type interior door lock. To lock the door when leaving your vehicle, press the Lock position and close the door. WARNING! • For personal security reasons and safety in an accident, lock the vehicle doors when you drive, as well as when you park and leave the vehicle. • Never leave children alone in a vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks — If Equipped The door lock switch is located on each front door panel. Press the switch downward to lock the doors, and upward to unlock the doors. 33 WARNING! • For personal security reasons and safety in an accident, lock the vehicle doors when you drive, as well as when you park and leave the vehicle. • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Unlock Doors On Exit The doors will unlock automatically on vehicles with power door locks if: Automatic Unlock Doors on Exit Programming The “Automatic Unlock Doors On Exit” feature can be enabled or disabled as follows: 1. The “Automatic Unlock Doors On Exit” feature is enabled 1. Close all doors and place the key in the ignition. 2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h) 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 2. Cycle the ignition switch between LOCK and ON and then back to LOCK four times ending up in the LOCK position. 1. The “Automatic Door Locks” feature is enabled 3. Depress the power door lock switch to lock the doors. 2. The transmission is in gear 4. A single chime will indicate the completion of the programming. 3.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Windows — If Equipped The power window switches are located on the instrument panel center stack (below the radio). The top left switch controls the left front window and the top right switch controls the right front window. The lower left switch controls the left rear passenger window (fourdoor models), and the lower right switch controls the right rear passenger window (four-door models).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE console. To disable the window controls, press the window lockout button downward. To enable the window controls, press the window lockout button upward. Rear Power Windows (Four-Door Models Only) The rear passenger window switches are located on the back of the center floor console. Auto Down Both the driver and front passenger window switches have an “Auto Down” feature.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down in certain open or partially open positions. This is a normal occurrence and can be minimized by adjusting window opening.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 CAUTION! Do not press on rear wiper blade when closing the rear flip-up window, as damage to the blade will result. WARNING! Gate Handle NOTE: Close the rear flip-up window before attempting to close the swing gate (hard top models only). Driving with the flip-up window open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the flip-up window closed when you are operating the vehicle.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems. These include the front and rear seat belts for the driver and all passengers, front airbags for both the driver and front passenger, and side airbags (if equipped) for both the driver and front passenger. If you will be carrying children too small for adult-size belts, your seat belts can also be used to hold infant and child restraint systems.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Research has shown that seat belts save lives, and that they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times to reduce or prevent injuries.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and take the forces of a collision the best. Wearing your belt in the wrong place could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of part of the belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. A belt that is loose will not protect you as well. In a sudden stop you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly. A belt that is worn under your arm is very dangerous.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. A twisted belt cannot do its job as well. In a collision it could even cut into you. Be sure the belt is straight. If you cannot straighten a belt in your vehicle, take it to your authorized dealer and have it fixed.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! The rear center lap/shoulder belt is equipped with a lock-out feature to ensure that the rear seatback is in the fully upright and locked position when occupied. If the rear seatback is not fully upright and locked and the rear center lap/shoulder belt can be pulled out of the retractor, the vehicle should immediately be taken to your authorized dealer for service. Failure to follow this warning could result in serious or fatal injury.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Position the shoulder belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a collision. As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you’ll prefer a higher position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Enhanced Seat Belt Use Reminder System (BeltAlert姞) If the driver’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced Warning System (BeltAlert威) will alert the driver to buckle the seat belt. The driver should also instruct all other occupants to buckle their seat belts.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Enhanced Warning System (BeltAlert威) can be reactivated by repeating this procedure. NOTE: Although the Enhanced Warning System (BeltAlert威) has been deactivated, the Seat Belt Warning Light will continue to illuminate while the driver’s seat belt remains unfastened. Seat Belts And Pregnant Women We recommend that pregnant women use seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver And Front Passenger Supplemental Restraint Systems (SRS) 51 This vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the steering wheel. The front passenger airbag is mounted in the instrument panel, above the glove compartment. The letters SRS are embossed on the airbag covers.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the vehicle is equipped with side airbags, they are located inside the driver and front passenger seats, and their covers are also labeled SRS. Side Airbag Location NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment. WARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The front airbags have a multistage inflator design. This allows the airbag to have different rates of inflation that are based on collision severity. Along with the seat belts, front airbags work with the instrument panel knee bolsters to provide improved protection for the driver and front passenger. Side airbags also work with seat belts to improve occupant protection. The seat belts are designed to protect you in many types of collisions.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seat as far back as possible, and use the proper child restraint. Refer to “Child Restraint” in this section. You should read the instructions provided with your child restraint to make sure that you are using it properly. 2. All occupants should use their lap and shoulder belts properly. 3. The driver and front passenger seats should be moved back as far as practical to allow the front airbags room to inflate. 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Driver Seat Track Position Sensors Airbag System Components The airbag system consists of the following: • Driver and Front Passenger Seat Belt Pretensioner • Occupant Restraint Control (ORC) Module How The Airbag System Works • Airbag Warning Light • The Occupant Restraint Control (ORC) Module determines if a frontal or side collision is severe enough to require the front and/or side airbags to inflate.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Also, the ORC turns on the Airbag Warning Light for six to eight seconds for a self-check when the ignition is first turned on. After the self-check, the Airbag Warning Light will turn off. If the ORC detects a malfunction in any part of the system, it turns on the Airbag Warning Light either momentarily or continuously. A single chime will sound if the light comes on again after initial start up.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 • The Side Impact (SRS) Seat-Mounted Side Airbags (If Equipped) are designed to activate only in certain side collisions. • The Knee Impact Bolsters help protect the knees of the driver and the front passenger, and position everyone for the best interaction with the front airbag. The ORC determines if a side collision is severe enough to require the side airbags to inflate.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE passenger as the airbags deploy and unfold. The abrasions are similar to friction rope burns or those you might get sliding along a carpet or gymnasium floor. They are not caused by contact with chemicals. They are not permanent and normally heal quickly. However, if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately. • As the airbags deflate you may see some smoke-like particles.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response Feature If the airbags deploy after an impact and the electrical system remains functional, vehicles equipped with power door locks will unlock automatically. The hazard lights will flash and the fuel will be cut off to the engine. In addition, after the vehicle has stopped moving, the interior lights will illuminate to aid visibility and remain lit until the ignition switch is turned off.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Perchlorate Material – special handling may apply, See www.dtsc.ca.gov/hazardouswaste/ perchlorate. Airbag Warning Light You will want to have the airbag system ready to inflate for your protection in an impact. The airbag system is designed to be maintenance free. If any of the following occurs, have an authorized dealer service the system promptly: • Does not come on during the six to eight seconds after the ignition switch is first turned on.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In the event that an investigation is undertaken by DaimlerChrysler Corporation (regardless of initiative), the company, or its designated representative, will first obtain permission of the appropriate custodial entity for the vehicle (usually the vehicle owner or leasee) before accessing the electronic data stored, unless ordered to download data by a court with legal jurisdiction (i.e., pursuant to a warrant).
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Airbag deployment level (if applicable) • Impact acceleration and angle • Seat belt status • Brake status (service and parking brakes) • Accelerator status (including vehicle speed) • Engine control status (including engine speed) • Transmission gear selection • Cruise control status • Traction/stability control status • Tire pressure monitoring system (TPMS) status Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies and c
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, an unrestrained child, even a tiny baby, can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper restraint for the child’s size.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • A rearward facing infant restraint should only be used in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE extracted from the retractor. Allow the belt to return to the retractor, pulling on the excess webbing to tighten the lap portion about the child restraint. For additional information, refer to ⬙Automatic Locking Mode⬙ earlier in this section. • In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system (Refer to LATCH — Child Seat Anchorage System in this section). The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who are still too small to fit the vehicle’s seat belts properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: To reset this feature you must let all of the belt webbing return into the retractor. You will not be able to pull out more webbing until all of the webbing has been returned back into the retractor. Installing the Child Restraint System We urge you to carefully follow the directions of the manufacturer when installing your child restraint.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH — Child Seat Anchorage System (Lower Anchors and Tether for CHildren) Your vehicle’s rear seat is equipped with the child restraint anchorage system called LATCH. The LATCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anchorages and upper tether straps from the child restraint to the vehicle structure.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The rear seating positions have lower anchorages that are capable of accommodating LATCH-compatible child seats having flexible, webbing-mounted lower attachments. Child seats with fixed lower attachments must be installed in the outboard positions only. Regardless of the specific type of lower attachment, NEVER install LATCH-compatible child seats such that two seats share a common lower anchorage.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Latch Anchorages (Two-Door Models) Latch Anchorages (Four-Door Models)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 In addition, there are tether strap anchorages behind each rear seating position located on the back of the seat. 2 Tether Strap Mounting (Four-Door Models) Tether Strap Mounting (Two-Door Models) Many, but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means for adjusting the tension of the strap.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE a hook for attachment to the tether strap anchorage, and a means for adjusting the tension of the strap. You will first loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages. Next, attach the lower hooks or connectors over the top of the anchorage bars, pushing aside the seat cover material.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the seat belt has an automatic locking retractor, it will have a distinctive label. Pull the belt from the retractor until there is enough to allow you to pass through the child restraint and slide the latch plate into the buckle. Then, pull the belt until it is fully extended from the retractor. Allow the belt to return to the retractor, pulling on the excess webbing to tighten the lap portion about the child restraint.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Tether Strap Mounting (Four-Door Models) Route the tether strap over the seatback and attach the hook to the tether anchor located on the back of the seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine in your vehicle. Drive moderately during the first 300 mi (500 km). After the initial 60 mi (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While cruising, brief full-throttle acceleration, within the limits of local traffic laws, contributes to a good break-in. Wide-open throttle acceleration in low gear can be detrimental and should be avoided.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period. If the vehicle is stopped in an open area with the engine running for more than a short time, adjust the ventilation system to force fresh, outside air into the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag Warning Light The light should come on and remain on for six to eight seconds as a indicator check when the ignition switch is first turned on. If the indicator is not lit during starting, have it serviced. If the light stays on or comes on while driving, have the system checked by an authorized dealer. Defrosters Check operation by selecting the defrost mode and place the blower control on high speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 3 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 ▫ Front Easy Entry Seats (Two-Door Models) . . . .88 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . .83 ▫ Head Restraints . . . . . . . . . . . . . . . . . . . . . . .89 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . .84 ▫ Fold And Tumble Rear Seat (Two-Door Models) . . . . . . . . . . . . . . . . . . . . .
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Raise The Rear Seat . . . . . . . . . . . . . . . . . .94 䡵 Windshield Wipers And Washers . . . . . . . . . . . . 100 䡵 To Open And Close The Hood . . . . . . . . . . . . . .94 ▫ Intermittent Wiper System . . . . . . . . . . . . . . . 100 䡵 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 ▫ Windshield Wiper Operation . . . . . . . . . . . . . 100 ▫ Interior Lights . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 ▫ To Accelerate For Passing . . . . . . . . . . . . . . . 105 䡵 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 䡵 Electronic Brake Control System . . . . . . . . . . . . 105 ▫ Console Storage Compartment . . . . . . . . . . . . 118 ▫ ABS (Anti-Lock Brake System) . . . . . . . . . . . . 105 ▫ Rear Storage Compartment . . . . . . . . . . . . . . 119 ▫ TCS (Traction Control System) . . . . . . . . . . . .
82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Door Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 ▫ Folding Down The Soft Top . . . . . . . . . . . . . . 170 ▫ Door Frame Removal (Two-Door Models) . . . . 132 ▫ Putting Up The Soft Top . . . . . . . . . . . . . . . . 180 ▫ Door Frame Installation (Two-Door Models) . . 134 䡵 Folding Windshield . . . . . . . . . . . . . . . . . . . . . 191 ▫ Door Frame Removal (Four-Door Models) . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror The mirror should be adjusted to center on the view through the rear window. A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjusting Rearview Mirror 83 Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle). The mirror should be adjusted while set in the day position (toward windshield).
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. WARNING! • Vehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cause you to collide with another vehicle or other object.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE HANDS–FREE COMMUNICATION (UConnect姞) This feature is not available on two–door or four–door models. 85 Voice Recognition Button (UConnect威 Hands-Free Phone) When you press this button, a “Not Equipped with UConnect” message will display on your radio screen. Phone Button (UConnect威 Hands-Free Phone) When you press this button, a “Not Equipped with UConnect” message will display on your radio screen.
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SEATS WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked. Front Seat Adjustment Move seat forward or rearward by lifting the lever. Be sure the latch engages fully.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lowered by using the ratcheting handle on the outboard side of the seat. Pull upward on the handle to raise the seat. Push downward on the handle to lower the seat. Seat Height Adjustment 87 Front Seatback Recline To recline: 1. Lean forward before lifting the handle, then lean back to the desired position and release the handle. 3 Recline Lever 2.
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Easy Entry Seats (Two-Door Models) Push the lever on the seatback rearward (toward the rear of the vehicle) to tilt the entire seat forward. Easy Entry Seat 1. To return the seat to a sitting position, rotate the seatback upright until it locks. Easy Entry Lever 2. Push the seat rearward until the track locks.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 NOTE: The front seats have a full recliner memory, which will allow the seatback to be returned to its original position. NOTE: The front seats have a track memory, which returns the seat to just past the halfway point of the track regardless of its original position. 3 NOTE: The recliner and easy entry levers should not be used during the automatic returning of the seat to its sitting position.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Also, be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily. 1. Lift the seatback release lever and fold seatback forward. Folding Rear Seat 3. When completed, return the seat to its normal position. 4. Raise the rear seatback using the assist strap and firmly lock seat into position. Rear Seat Release 2. Slowly flip the entire seat forward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Removing the Rear Seat (Two-Door Models) 91 1. Remove the three rear subwoofer (if equipped) mounting screws using a #T30 Torx威 head driver. WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision people riding in these areas are more likely to be seriously injured or killed. 3 • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Press down on the release bar on each side, and pull the seat out and away from lower bracket. 5. Remove the seat from the vehicle. Replacing the Rear Seat (Two-Door Models) Reverse steps for removing the seat. WARNING! • To help protect against personal injury, passengers should not be seated in the rear cargo area with the rear seat folded down or removed from the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Prior to folding the rear seat, it may be necessary to reposition the front seat to its mid-track position. Also, be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily. To Fold Down the Rear Seat Locate the pull strap (lower outboard side of seat), and pull it towards you until the seatback releases.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Raise the Rear Seat 1. Raise the seatback and lock it into place. If interference from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position. TO OPEN AND CLOSE THE HOOD To open the hood, first release both hood latches. NOTE: If the rear seatback is not fully latched, the center shoulder belt will not be able to be extended for use.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Next, locate handle in middle of the front end of the hood. Insert hand into gap between hood and top of grille, and push handle to the side to raise hood. You may have to push down slightly on the hood before pushing the handle. Insert the support rod into the slot on the hood panel. To close the hood, remove the support rod from the hood panel and place it in the retaining clip. Lower the hood slowly. Secure both of the hood latches.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Also, the rear cargo lamp may be turned on by pressing the lens. Press the lens again to turn it off. When a door is open and the interior lights are on, rotating the dimmer control all the way down to the OFF detent will cause all the interior lights to turn off. This is also known as the ⬙Party⬙ mode because it allows the doors to stay open for extended periods of time without discharging the vehicle’s battery.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Daytime Brightness Feature Certain instrument panel components (odometer, radio display) can be illuminated at full brightness during the daytime. This can be helpful when driving with your headlights on during the daytime, such as in a parade or a funeral procession. To activate this feature, rotate the left stalk one detent lower than the dome light.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Lens fogging can occur under certain atmospheric conditions. This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the lamps on will usually accelerate the clearing process. To change the brightness of the instrument panel lights, rotate the center portion of the multifunction control lever up or down.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Passing Light You can signal another vehicle with your headlights by lightly pulling the multifunction control lever toward the steering wheel. This will cause the headlights to turn on at high beam and remain on until the lever is released. Front Fog Lights — If Equipped The front fog light switch is located on the multifunction control lever. To activate the front fog lights, turn on the parking or low beam headlights and pull out the end of the lever.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS CAUTION! In cold weather, always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Washers To use the washer, pull the lever toward you and hold while spray is desired. If the lever is pulled while in the delay range, the wiper will operate for two wipe cycles after the lever is released, and then resume the intermittent interval previously selected. 101 TILT STEERING COLUMN To tilt the column, push down on the lever under the multifunction control lever and move the wheel up or down, as desired.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Tilting the steering column while the vehicle is moving is dangerous. Without a stable steering column, you could lose control of the vehicle and have an accident. Adjust the column only while the vehicle is stopped. Be sure it is locked before driving. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 35 mph (56 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Leaving the Electronic Speed Control System on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you are not using it. To Set At A Desired Speed When the vehicle has reached the desired speed, press down on the lever and release. Release the accelerator and the vehicle will operate at the selected speed.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tapping RESUME ACCEL once will result in a 1 mph (1.6 km/h) speed increase. Each time the lever is tapped, speed increases so that tapping the lever three times will increase speed by 3 mph (4.8 km/h), etc. Manual Transmission Depressing the clutch pedal will disengage the speed control. A slight increase in engine RPM before the speed control disengages is normal. To decrease speed while speed control is ON, push down and hold SET DECEL.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 To Accelerate For Passing Depress the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. ESP (Electronic Stability Program). All five of these systems work together to enhance vehicle stability and control in various driving conditions. Using Speed Control On Hills ABS (Anti-Lock Brake System) NOTE: The speed control system maintains speed up and down hills.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! ABS (Anti-Lock Brake System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ABS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE BAS (Brake Assist System) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce braking distances. The BAS complements the anti-lock brake system (ABS). Applying the brakes very quickly results in the best BAS assistance.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ERM (Electronic Roll Mitigation) This system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the speed of the vehicle. When ERM determines that the rate of change of the steering wheel angle and vehicles speed are sufficient to potentially cause wheel lift, it applies the appropriate brake and may reduce engine power to lessen the chance that wheel lift will occur.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ESP (Electronic Stability Program) This system enhances directional control and stability of the vehicle under various driving conditions. ESP corrects for over/under steering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the over/under steer condition. Engine power may also be reduced to help the vehicle maintain the desired path.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! ESP (Electronic Stability Program) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESP cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE required to gain traction. To turn ESP on again, momentarily depress the ESP OFF switch. This will restore the normal “ESP On” mode of operation. ESP OFF Switch NOTE: To improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand, or gravel, it may be desirable to switch to the “Partial Off” 111 mode by pressing the ESP OFF switch.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE again, momentarily depress the ESP OFF switch. This will restore the normal “ESP On” mode of operation. NOTE: The ESP system will change to “Partial Off” mode if the vehicle speed exceeds 40 mph (64 km/h). After the vehicle speed is reduced below 35 mph (56 km/h), the ESP system will return to “Full Off” mode.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 40 mph (48 km/h), the normal ESP stability function returns but TCS remains off. When the vehicle speed drops below 35 mph (40 km/h), the ESP system shuts off. ESP is off at low vehicle speeds in 4L range so that it will not interfere with off-road driving, but the ESP function returns to provide the stability feature at speeds above 40 mph (48 km/h). The ESP/TCS Indicator Light will always be illuminated in 4L range when ESP is off.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE maneuver must be performed to permanently disable ESP and defeat the functionality of the ESP switch. Repeating the procedure will return the system to normal ESP operation and restore ESP switch functionality allowing ESP “Partial” or “Off” modes. WARNING! With ESP in the permanent disable mode, enhanced vehicle stability offered by the ESP and ERM systems is unavailable.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 9. Turn the steering wheel back to center. 10. Press and hold the ESP OFF button for seven seconds. 11. Cycle the ignition key to OFF. After performing the ESP disable procedure correctly, “ESP OFF” will be displayed in the odometer for approximately 12 seconds each time the ignition is moved to ON. Repeating the ESP disable procedure will re-enable normal ESP operation.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL POWER OUTLET This vehicle has two auxiliary power outlets that can provide up to 20 Amps of current for accessories designed for use with the standard power outlet adapters. The outlet located in the lower portion of the instrument panel has a snap-on plastic cap so that it can be covered when not in use. As a safety precaution, the outlet in the instrument panel only operates with the ignition switch ON.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Electrical Outlet Use With Engine Off WARNING! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.), will degrade the battery even more quickly.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Cupholders The rear cupholders are located on the back of the center console. STORAGE Console Storage Compartment To lock or unlock, insert ignition key and turn. To open, press the latch and lift cover.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Rear Storage Compartment The rear storage compartment cover is held by a springloaded latch. In order to remove the rear storage compartment cover, use the following procedure: NOTE: The rear storage compartment latch should not be used as cargo tie-down. 3 1. Flip up pull loop so it is perpendicular (straight up) to the top surface of the tray. 2. Pull up on loop and twist 90 degrees, so it is parallel to the slotted hole in tray. 3.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DUAL TOP — IF EQUIPPED If your vehicle is equipped with a Dual Top, you must remove one of the tops from the vehicle. If the soft top is removed, the pivot brackets must also be removed from the sport bar. The soft top was installed at the factory for shipping purposes only. The soft top and the hard top are to be used independently. Removal is mandatory to prevent any possible wear and tear on the soft top.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Remove the soft top bow assembly pivot bracket screws (two per side) using a #T30 Torx威 head driver. 121 4. Using a rubber mallet, carefully tap the knuckles from the left and right metal pivot brackets. Remove the soft top from the vehicle and store in a clean, dry location.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Unzip the zipper on the sport bar cover to expose the pivot brackets. Remove the brackets using a #T30 Torx威 head driver. Recover and re-zip the sports bar cover. Store pivot brackets and screws in a safe place. Installing the Soft Top NOTE: The following procedures are for first time set up only. For future soft top procedures, refer to “Soft Top” in this section. 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 3. Install the door frames. Refer to “Door Frame” in this section. 4. If the soft top has been removed, follow these steps to reinstall the soft top. If the soft top is on the vehicle, proceed to step #5. 3 a. If the pivot brackets have been removed, unzip the sport bar covers and attach the pivot brackets to the sports bar with the four screws that were removed using a #T30 Torx威 head driver. Re-cover and re-zip sport bar covers. b.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE c. Tap the knuckles on the side with a rubber mallet to reattach them to the metal pivot brackets. CAUTION! d. Screw the pivot screws back into place using a #T30 Torx威 head driver. Secure them until they are snug being careful not to cross-thread the screws or overtighten. Do not overtighten the screws. You can strip the screws if they are overtightened.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Unsnap and remove the black boot cover. This cover should be discarded. It was intended as a protective cover for shipping only. NOTE: A visual instruction sheet is enclosed in the dual top wrap. 6. Remove the swing gate bar (black metal bar for bottom of rear window) and set aside. NOTE: Be sure the wire harness in the left rear corner is not tangled in the soft top bows before you lift the top. 7. Put up the soft top.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Panel(s) Removal NOTE: Left panel must be removed before removing right panel. 1. Fold down the sun visor, and move to the side. 2. Turn center L-shaped locks (2) from center of roof panel. 3. Turn rear L-shaped lock (located above shoulder belt anchorage).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Turn rear fasteners (knobs) (located on overhead speaker bar assembly) counterclockwise until they can be removed. 127 5. Unlatch the header panel latch located at the top of the windshield. 3 6. Remove panel. To remove right panel, follow steps above except for step 2.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Panel(s) Installation NOTE: The front panel(s) must be positioned properly to ensure sealing. Set the panels on the windshield frame so that there is no overhang. Also, make sure that the panels are sitting flush with the body. 1. Install right panel first, then the left panel. 2. Reinstall panel(s) using the same steps for removal in reverse order. Front Panel(s) Installation Only (With Rear Hard Top Removed) 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Reinstall panel(s) using the same steps for removal in reverse order. 129 5. Open swing gate all the way to ensure clearance of the rear window glass. Lift rear window glass. Rear Hard Top Removal 1. Remove both front panels. Refer to “Front Panel(s) Removal” in this section. 2. Open both doors. 3. Remove the two Torx威 head screws that secure the hard top at the B-pillar (near top of door) using a #40 Torx威 head driver (4–Door Only). 4.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Locate the wiring harness on the left rear inside corner of the vehicle. CAUTION! Make sure storage cap is installed to prevent foreign materials from entering washer tube and clogging system, and also to prevent fluid from being sprayed into the rear of the vehicle. 8. Disconnect the wire harness from the hard top by pressing the tab at the side of the connector and pulling to disconnect. 7.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Rear Hard Top Installation NOTE: If the door frames are installed from soft top usage, they must be removed prior to installation of the hard top. 1. Inspect the hard top seals for damage and replace if necessary. 2. Install the hard top using the same steps for removal in reverse order. 9. Close the swing gate. 10. Remove the hard top from the vehicle. Place on a soft surface to prevent damage.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DOOR FRAME WARNING! Do not drive your vehicle on pavement with the door frame(s) removed as you will lose the protection that they can provide. This procedure is furnished for use during off-road operation only. Door Frame Removal (Two-Door Models) 1. Unscrew and remove the door frame attachment knobs (two per side). WARNING! Use both hands to remove the door frames. The door frames will fold and could cause injury if both hands are not used.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 2. Place one hand on the upper rear and one hand on the front of the door frame. 3. Pull the frame towards you with your rearward hand to remove the frame from the vehicle. 3 WARNING! 4. Screw the knobs back into the door frame and fold for storage. Store in a secure location. Never store the door frames in your vehicle. In an event of an accident, a loose door frame many cause personal injury.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Door Frame Installation (Two-Door Models) 1. Unfold door frame and unscrew thumbscrews. 2. Set the door frame pin into the hole on top of the body side, behind the door opening. 3. After the door frame pin has been set into the body side hole, carefully set the front of the door frame into the rubber seal at the top of the windshield. 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Starting with the front knob, screw in and tighten both knobs. Repeat on the other side. 135 Door Frame Removal (Four-Door Models) 1. Unscrew and remove the two forward most door frame attachment knobs.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Use both hands to remove the door frames. The door frames will fold and could cause injury if both hands are not used. 2. Place one hand on the upper rear and one hand on the upper front of the front door frame. 3. Pull the frame towards you with your front hand to remove the frame from the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Unscrew and remove the remaining door frame attachment knob on the rear door frame. 137 5. Place one hand on the upper rear and one hand on the upper front of the rear door frame. Pull the frame towards you with your rear hand to remove the frame from the vehicle.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Screw the knob back into the door frame and fold for storage. Store in a secure location. WARNING! • Never store the door frames in your vehicle. In an event of an accident, a loose door frame many cause personal injury. If removed, always store the door frames outside of the vehicle. Door Frame Installation (Four-Door Models) 1. Install the rear door frame first. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 3 3. Position the top of the door frame against the metal sport bar and press onto the side bar making sure not to pinch the material of the sports bar covers and to ensure it is properly positioned on the seal above the front of the rear door. 4. Loosely install the rear knob (long knob) to hold the door rail in position.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Carefully set the front of the front door frame in the rubber seal at the top of the windshield. Then, clip the front of the door rail over the side bar making sure that the material for the side bar cover is not pinched by the door frame. Position the rear of the front door frame to lay on top of the front of the rear door frame. 6. Loosely install both knobs beginning with the front knob (long knob).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE SOFT TOP (TWO-DOOR MODELS) CAUTION! • The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting, or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle, and thus cannot properly carry any additional loads other than environmental (rain, snow, etc.).
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! • Do not run a fabric top through an automatic car wash. Window scratches and wax build up may result. • Do not lower the top when the temperature is below 41°F (5°C). Damage to the top may result. • Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. • Do not lower the top with the windows installed. Window and top damage may occur.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Folding Down The Soft Top 3 1 2 3 4 5 — — — — — Header Bow 2–Bow 3–Bow Sail Panel Plastic Retainer 6 — Body Side Retainer 7 — Quarter Window 8 — Check Strap 9 — Front Retainer — Quarter Window 10 — Bottom Retainer — Quarter Window
144 1 2 3 4 5 — — — — — UNDERSTANDING THE FEATURES OF YOUR VEHICLE Zipper Start Zipper Finish Swing Gate Bar Swing Gate Brackets Sail Panels
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Clean side and rear windows before removal to assist in preventing scratching during removal of the soft top. If zippers are difficult to operate due to road dust, etc., clean them with a mild soap solution and a small brush. Cleaning products are available through your authorized dealer. 1. If your vehicle has half doors, remove each half door window by opening the door and lifting the half door window out.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Unclip and move the sun visors to the side. 5. Open the swing gate. 4. Release the header latches and leave the hooks in the loops on the windshield. 6. Before unzipping the rear window, release the first 3 in (7.6 cm) of both sail panels from the channel. Remove the swing gate bar by pulling it straight rearward out of the swing gate brackets.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Unzip the rear window starting at the right lower corner of the window. Pull the zipper up, across the top and down to the left lower corner. Zipper pulls will stay on the rear window. Pull down on the rear window to disengage from the zipper on the top cover. Stow the windows carefully to avoid scratching. 147 7. Undo the Velcro威 that runs along the top and rear edge of the side window. 8. Beginning from the rear lower corner, completely unzip the window.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 10. Finish releasing the sail panel retainers from the body side channel at the rear corners of the vehicle. NOTE: When releasing the sail panel retainers, it is helpful to pull down on the rear roof bow. 11. As you begin to lower the top, fold the sail panels so that they rest on top of the soft top.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 12. The swing gate brackets do not need to be removed unless the hard top is being installed. To remove the swing gate brackets, pull the front of the bracket forward while rolling the entire bracket back in towards the vehicle to disengage. 149 13. Completely release the latches from the loops on the windshield frame. If your vehicle is not equipped with the Sunrider package, proceed to Step 16.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 14. Make sure the plastic sleeves are slid forward over the Sunrider link (Sunrider Models Only). 15. Unlatch the side bows from both door rails (Sunrider Models Only).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 16. Before lowering the top, open the swing gate to prevent possible damage to the rear center high-mounted brake lamp. Move to the front of the vehicle. Grasp the side bow behind the header and lift the top, folding it toward the rear of the vehicle. 151 portion of the top from flapping outside of the vehicle. When the top is completely down, position the drip rails so they make a “v-shape”, this prevents damage to the soft top material. 3 18.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Putting Up The Soft Top 1 2 3 4 5 — — — — — Header Bow 2– Bow 3–Bow Sail Panel Plastic Retainer 6 — Body Side Retainer 7 — Quarter Window 8 — Check Strap 9 — Front Retainer — Quarter Window 10 — Bottom Retainer — Quarter Window
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 3 1 2 3 4 5 — — — — — Zipper Start Zipper Finish Swing Gate Bar Swing Gate Brackets Sail Panels
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. Unclip and move the sun visors to the side. 2. Install door frames, if removed. Refer to “Door Frame” in this section. 4. Standing on the side of the vehicle, lift the top by the side bow and the 2–bow (middle bow) up and over the sports bar until the header rests on the top of the windshield frame. 3. Make sure the plastic sleeve is slid rearward over Sunrider link (Sunrider Models Only). 5.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Make sure the Sunrider bracket on the side bows latches to the door rails (Sunrider Models Only). 7. Open the header latches and engage the hook on each side onto the windshield loops (do not close the latches). 155 8. If the swing gate brackets were removed, install them by hooking the rear edge of the bracket on the interior side of the body channel. Then, rotate it rearward and over the channel until it snaps onto the exterior part of the rail.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 9. Move to the rear of the vehicle and gently pull the sail panels over the rear roof bow. 10. Partially install the sail panel retainers into the body side channel, leaving the last 3 in (7.6 cm) towards the rear window loose (on both sides). Pulling down on the rear roof bow (3–bow) will aid to reach the channel with the retainers.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 11. To install the side windows, affix the window temporarily by attaching to the Velcro威 in the rear corner. Start the zipper but close only about 1 in (2.5 cm). 157 12. Insert the front retainer of the window into the door channel, making sure the retainer is fully seated and properly positioned on the door frame. Failure to do so can result in wind and water leaks or damage to the window.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 13. Continue closing the zipper only along the top edge of the window. 14. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper completely and attaching the Velcro威 along the top and rear of the window. Repeat this step for the opposite side.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 15. Locate the black swing gate bar. Slide the swing gate bar over the receiver at the bottom inside of the rear window. The spongy part of the seal should be down and pointed outward to seal with the swing gate when closed. 159 16. Install the rear window by starting both zipper ends at the lower left corner of the rear window opening. Ensure that the zippers are properly started and aligned before zipping to prevent damage. 3 17.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 18. Grasp the swing gate bar and position it into the swing gate brackets. 19. Apply downward pressure on the top corner of the rear soft top bow (3–bow), then complete attaching the sail panel retainers into the body side channel. 20. Open the doors and insert the roof retainers into the channels above the door, starting at the front and working rearward. 21. Close the header latches and return the sun visors to their secured position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 To Open 1. Insert finger behind the plastic retainer. Pull down and roll the retainer out of the channel. Repeat this on the other side. 3 SUNRIDER (TWO-DOOR MODELS) — IF EQUIPPED NOTE: If you are going to be driving faster than 40 mph (64 km/h) with the Sunrider feature open, it is recommended that you remove the rear window of the vehicle.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Unclip and move the sun visors to the side. 3. Release the header latches from the loops on the windshield frame. 4. Slide the plastic sleeve forward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Grasp the header and lift the top back. Make sure the material is folded back as shown. 163 6. Locate straps to secure side bows. Wrap straps around bows as shown. Repeat on the other side. NOTE: The Sunrider latch on the door rail should not be activated for Sunrider use. If activated, the soft top must be reinstalled starting from the sail panels. 3 7. Reposition sun visors.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Close 1. Remove straps from side bows. 2. Unclip and move sun visors to the side. 3. Grasp the front header and pull to the front of the vehicle. 4. Hook header latches to the loops on the windshield frame, close latches, and return sun visor’s to their original position. 5. Slide plastic sleeve rearward over Sunrider link. 6. Tuck drip rail retainers into door frame slots.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 3. Release the header latches from the loops on the windshield frame. 3 2. Unclip and move the sun visors to the side.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Grasp the front side bow behind the header, and lift the top. 5. Fold back the front section of the top, and gently rest the header on top of the rear portion of the deck.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Fold the top material so that the plastic retainers form a “W” as shown. Enter the vehicle, and move the material into two folds. Ensure that the straps are securely stowed. 167 7. Close the front header latches. 8. Secure the top by using the two provided straps. Each strap will wrap around the side bow and Velcro威 to itself, use one strap on each side of the vehicle. 3 To Close Perform the above steps in the opposite order.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SOFT TOP (FOUR-DOOR MODELS) CAUTION! • The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting, or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle, and thus cannot properly carry any additional loads other than environmental (rain, snow, etc.).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 CAUTION! WARNING! • Do not run a fabric top through an automatic car wash. Window scratches and wax build-up may result. • Do not lower the top when the temperature is below 41°F (5°C). Damage to the top may result. • Do not lower the top when the windows are dirty. Grit may scratch the window. • Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. • Do not lower the top with the windows installed.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Down The Soft Top 1 2 3 4 5 — — — — — Header Bow 2–Bow 3–Bow 4–Bow Sail Panel 6 — Body Side Retainer 7 — Quarter Window 8 — Check Strap 9 — Front Retainer — Quarter Window 10 — Bottom Retainer — Quarter Window 11 — Plastic Retainer
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 3 1 2 3 4 5 — — — — — Zipper Start Zipper Finish Swing Gate Bar Swing Gate Brackets Sail Panels
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Clean side and rear windows before removal to assist in preventing scratching during removal of the soft top. If zippers are difficult to operate due to road dust, etc., clean them with a mild soap solution and a small brush. Cleaning products are available through your authorized dealer. 1. If your vehicle has half-doors, remove each half-door window by opening the door and lifting the half-door window out.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Release the header latches and hooks from the loops on the windshield frame. 173 5. Open the swing gate. 6. Before unzipping the rear window, release the first 3 in (7.6 cm) of both sail panels from the channel. Remove the swing gate bar by pulling it straight rearward out of the swing gate brackets.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Unzip the rear window starting at the right lower corner of the window. Pull the zipper up, across the top and down to the left lower corner. Zipper pulls will stay on the rear window. Pull down on the rear window to disengage from the zipper on the top cover. Stow the windows carefully to avoid scratching. 7. Undo the Velcro威 that runs along the top and rear edge of the side window. 8. Beginning from the rear lower corner, completely unzip the window. 9.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 10. Finish releasing the sail panel retainers from the body side channel at the rear corners of the vehicle. 175 11. Fold the sail panels so that they rest on top of the soft top. 3 NOTE: When releasing the sail panel retainers, it is helpful to pull down on the rear roof bow.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 12. The swing gate brackets do not need to be removed unless the hard top is being installed. To remove the swing gate brackets, pull the front of the bracket forward while rolling the entire bracket back in towards the vehicle to disengage. 13. Grasp the front side bow behind the header, and lift the top.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 14. Fold back the front section of the top, and gently rest the header on top of the rear portion of the deck. 177 15. Fold the top material so that the plastic retainers form a “W” as shown. Enter the vehicle, and move the material into two folds.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 16. Release the side bows by pressing down on the latch above the front of the rear door. Push the top rearward to disengage. Repeat this step on the other side. 17. Grasp the folded side bows and slide the top along the door frame track to the rear door frame.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 18. Before lowering the top, open the swing gate to prevent possible damage to the rear center high-mounted brake lamp. Gently slide the side bows off the door frame track and lower the top down into the vehicle. 179 20. Once the top is fully down, use the Velcro straps provided to secure the top to the vehicle by wrapping the strap around the side bows and through the slot on the body. 3 19.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Putting Up The Soft Top 1 2 3 4 5 — — — — — Header Bow 2–Bow 3–Bow 4–Bow Sail Panel 6 — Body Side Retainer 7 — Quarter Window 8 — Check Strap 9 — Front Retainer — Quarter Window 10 — Bottom Retainer — Quarter Window 11 — Plastic Retainer
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 3 1 2 3 4 5 — — — — — Zipper Start Zipper Finish Swing Gate Bar Swing Gate Brackets Sail Panels
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Be extremely careful when putting up the soft top to prevent the doors from getting scratched. It may be helpful to open the rear doors. 1. Install the door frames, if removed. Refer to “Door Frame” in this section. 2. Undo the straps used to secure the top in the down position and store in secure location. 3. Open the swing gate. 4. Grasp the folded side bows and lift to the top of the rear door frames.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Insert the slider feature of the knuckles into the door frame tracks and slide the top forward. 183 6. Ensure that the top locks into Sunrider locking mechanisms that are located above the front of the rear doors.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 7. Unclip and move the sun visors to the side. 8. Standing on the side of the vehicle, lift the top by the side bow until it rests on the windshield frame. 9. Before attaching the header latches, be sure the top retainers above the doors do not get trapped between the top and the door frame. Also, make certain the feet at both ends of the 2–bow (forward most bow) seat properly on the side bows above the front doors. They should cradle the tubing.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 10. Open the header latches and engage the hook on each side onto the windshield loops (do not close the latches). 185 over the channel until it snaps onto the exterior part of the rail. To be properly located, the bracket must only be clipped to the shortened rail edge. 3 11. If the swing gate brackets were removed, install them by hooking the rear edge of the bracket on the interior side of the body channel. Then, rotate it rearward and 12.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 13. Partially install the sail panel retainers into the body side channel, leaving the last 3 in (7.6 cm) towards the rear window loose (on both sides). Pulling down on the rear roof bow (4–bow) will aid to reach the channel with the retainers. 14. To install the side windows, affix the window temporarily by attaching to the Velcro威 in the upper rear corner. Start the zipper but close only about 1 in (2.5 cm).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 15. Insert the front retainer of the window into the door channel, making sure the retainer is fully seated and properly positioned on the door frame. Failure to do so can result in wind and water leaks or damage to the window. 187 16. Continue closing the zipper only along the top edge of the window.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 17. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper completely and attaching the Velcro威 along the top and rear of the window. Repeat this step for the opposite side. 18. Locate the black swing gate bar. Slide the swing gate bar over the receiver at the bottom inside of the rear window.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 19. Install the rear window by starting both zipper ends at the lower left corner of the rear window opening. Ensure that the zippers are properly started and aligned before zipping to prevent damage. 189 21. Grasp the swing gate bar and position it into the swing gate brackets. 3 22. Complete the installation of the sail panel by inserting the rest of the retainer into the body channel. 20. Run the first zipper fully around to the right side of the window.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 23. Open the doors and insert the top retainers into the channels in the door frame above the doors, starting at the front and working toward the rear of the vehicle. 24. Ensure plastic retainer is tucked in properly at B-pillar, not pinching the seal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 25. Close the header latches and return the sun visors to their secured position. 191 FOLDING WINDSHIELD The fold-down windshield and removable side bars on your vehicle are structural elements that can provide some protection in some accidents. The windshield also provides some protection against weather, road debris and intrusion of small branches and other objects.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Raise the windshield and reinstall the side bars as soon as the task that required their removal is completed and before you return to on-road driving. Both you and your passenger should wear seat belts at all times, on-road and off-road, regardless of whether the windshield is raised or folded down. Outside rearview mirrors are mounted on the doors. If you choose to remove the doors, see your authorized dealer for a replacement cowl-mounted outside mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 Lowering The Windshield And Removing Side Bars 1. Lower the fabric top or remove the hard top following the instructions in this manual. 3 NOTE: To assist in properly reinstalling side bars, mark the original locations prior to removing. 2. Remove the two top hex bolts (13 mm), and the one side hex bolt (13 mm) visible through the trim (Do not remove plastic corner trim, sun visor bolts, or sport bar covering). 3. Open sport bar Velcro covering. 4.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Pull side bar out horizontally when removing. NOTE: Store all of the mounting bolts in their original threaded holes and tighten for safekeeping. 5. Remove side bar assembly, and reattach sport bar Velcro威 covering. 6. To safely store the side bars in your vehicle, use four cinch straps (available from your authorized dealer). Attach the straps through the slots located on the floor behind the folded rear seat at the front of the storage bin cover.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 7. Remove the windshield wiper arms by first pulling the wiper away from the windshield and out to the “lock” position. Unsnap the wiper arm nut caps, and remove retaining nuts. Lift the wiper arms off and store in center console or securely behind the rear seat. 3 8. Remove the lower windshield plates by removing the six black round-headed Torx威 head screws (using a #40 Torx威 head driver) on each side of the base of the windshield. 9.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Raising The Windshield And Replacing Side Bars 1. Raise the windshield. 2. Loosely attach rear of side bar to sport bar. Refer to Step 4 of “Lowering Windshield And Removing Side Bars” earlier in this section. 3. Attach front of side bar to windshield frame. • Install top two hex bolts (13 mm) first, then lower side hex bolt (13 mm). Lower side bolt will not align until top two bolts are installed. 4. Tighten all side bar attachment bolts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Install the lower windshield plates with the six black round-headed Torx威 head screws (using a #40 Torx威 head driver) on each side of the base of the windshield. 6. Reinstall wiper arms. 197 REAR WINDOW FEATURES — HARD TOP ONLY Rear Window Wiper/Washer — If Equipped A rotary ring switch on the control lever (located on the right side of the steering column), controls operation of the rear wiper/washer function.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adding Washer Fluid The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the front of the engine compartment, and should be checked for fluid level at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The defroster will automatically turn off after about ten minutes. For five more minutes of operation, press the switch again. To prevent excessive battery drain, use the defroster only when the engine is operating. 199 CAUTION! Use care when washing the inside of the rear window to prevent damage to heating elements. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel And Controls . . . . . . . . . . . . . 204 ▫ Two Types Of Signals . . . . . . . . . . . . . . . . . . 221 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . . . 205 ▫ Electrical Disturbances . . . . . . . . . . . . . . . . . . 221 䡵 Instrument Cluster Description . . . . . . . . . . . . . 206 ▫ AM Reception . . . . . . . . . . . . . . . . . . . . . . . 221 䡵 Compass And Trip Computer — If Equipped . . . 215 ▫ FM Reception . . .
202 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ List Button (CD Mode For MP3 Play) . . . . . . . 233 ▫ Operating Instructions — Satellite Radio . . . . . 251 ▫ Info Button (CD Mode For MP3 Play) . . . . . . . 233 ▫ Operating Instructions — Hands-Free Communication (UConnect威) (If Equipped) . . . 251 䡵 Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) . . . . . . . . . . . . . . . . . . 234 ▫ Operating Instructions - Radio Mode . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operating Instructions - Hands-Free Phone (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . 257 ▫ Operating Instructions - Video Entertainment System (VES威) (If Equipped) . . . . . . . . . . . . . 258 䡵 CD/DVD Disc Maintenance . . . . . . . . . . . . . . . 258 䡵 Radio Operation And Cellular Phones . . . . . . . . 258 䡵 Climate Controls . . . . . . . . . . . . . . . . . . . . . . . 259 203 ▫ Manual Heater Only . . . . . . . . . . . . . . . . . . .
204 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL AND CONTROLS 1 2 3 4 5 — Air Outlet — Instrument Cluster — Horn — Radio — Glove Box 6 7 8 9 — Climate Controls — Power Outlet — Lower Switch Bank — Auxiliary Power Outlet
UNDERSTANDING YOUR INSTRUMENT PANEL 205 INSTRUMENT CLUSTER 4
206 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTION Your vehicle is equipped with the instrument cluster described on the following pages. 3. Front Fog Light Indicator Light — If Equipped This light shows when the front fog lights are on. 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank. 4. Low Fuel Warning Light When the fuel level reaches approximately 2.8 gal (10.6L) this light will turn on and a single chime will sound.
UNDERSTANDING YOUR INSTRUMENT PANEL 7. Seat Belt Indicator Light A warning chime and an indicator light will alert you to buckle the seat belts. When the belt is buckled, the chime will stop, but the light will stay on until it times out (about six seconds). 8. Turn Signal Indicator Lights The arrows will flash with the exterior turn signals when the turn signal lever is operated. A tone will chime if the turn signals are left on for more than 1 mi (2 km). 9.
208 UNDERSTANDING YOUR INSTRUMENT PANEL off, it indicates a possible brake system fluid leak or low pressure level, see your authorized dealer immediately. detected a malfunction or has become inoperative. The system reverts to standard non-anti-lock brakes. If the parking brake is applied and the vehicle is in motion, the Brake Warning Light will “flash” and a chime will sound. If both the Brake Warning Light and the ABS Warning Light are on, see your authorized dealer immediately.
UNDERSTANDING YOUR INSTRUMENT PANEL 15. Tachometer This light indicates the engine speed in revolutions per minute (RPM). CAUTION! Do not operate the engine with the tachometer pointer in the red area. Engine damage will occur. 16. Engine Coolant Temperature Warning Light This light warns of an overheated engine condition. If the engine is critically hot, a warning chime will sound 10 times. After the chime turns off, the engine will still be critically hot until the light goes out. 17.
210 UNDERSTANDING YOUR INSTRUMENT PANEL 21. Odometer/Trip Odometer Reset Button Press this button to change the display from odometer to either of two trip odometer settings. Trip A or Trip B will appear when in the trip odometer mode. Press and hold the button for two seconds to reset the trip odometer to 0 miles or kilometers. The odometer must be in trip mode to reset. 22. Transmission Range Indicator This display indicator shows the automatic transmission gear selection. 23.
UNDERSTANDING YOUR INSTRUMENT PANEL Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.
212 UNDERSTANDING YOUR INSTRUMENT PANEL U.S. federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. Therefore, if the odometer reading is changed during repair or replacement, be sure to keep a record of the reading before and after the service so the correct mileage can be determined.
UNDERSTANDING YOUR INSTRUMENT PANEL 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition switch to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary repeat this procedure. 25. Malfunction Indicator Light This light is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems.
214 UNDERSTANDING YOUR INSTRUMENT PANEL will flash anytime the ESP or TCS is active and helping to improve vehicle stability. If the ESP/TCS Indicator Light is on solid, the ESP system has been turned off by the driver or a temporary condition exists that will not allow full ESP function. 27. O/D (Overdrive) Off Indicator Light This light will illuminate when the O/D OFF button has been selected. The O/D OFF button is located on the center console. 28.
UNDERSTANDING YOUR INSTRUMENT PANEL If the light continues to flash when the engine is running, immediate service is required and you may experience reduced performance, an elevated/rough idle, or engine stall and your vehicle may require towing. The light will come on when the ignition is first turned on and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by your authorized dealer. 31.
216 UNDERSTANDING YOUR INSTRUMENT PANEL Control Buttons Press and release the left button (on the instrument cluster) to access the computer displays. Press and hold the left button (on the instrument cluster) for two to three seconds to switch from English to Metric displays. Trip Conditions Average Fuel Economy (AVG ECO) This display shows the average fuel economy since the last reset. Reset Press and hold the right button (on the instrument cluster) while function is being displayed to reset.
UNDERSTANDING YOUR INSTRUMENT PANEL Trip Odometer (ODO) This display shows the distance traveled since the last reset. Press and release the right button (on the instrument cluster) to switch from odometer, to Trip A or Trip B. Press and hold the right button while the odometer/ trip odometer is displayed to reset. Trip A Shows the total distance traveled for Trip A since the last reset. Trip B Shows the total distance traveled for Trip B since the last reset.
218 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Magnetic materials should be kept away from the top of the instrument panel above the radio. This is where the compass sensor is located. Automatic Compass Calibration The self-calibrating feature of the compass eliminates the need to calibrate the compass for normal conditions. During a short initial period, the compass may appear erratic and the CAL symbol will appear (blinking) on the display.
UNDERSTANDING YOUR INSTRUMENT PANEL When the CAL symbol is no longer displayed, the compass is calibrated and should display correct headings. Verify proper calibration by checking North (N), South (S), East (E), and West (W). If the compass does not appear accurate, repeat the calibration procedure in another area. Compass Variance (VAR) Variance is the difference between magnetic North and geographic North. For proper compass function, the correct variance zone must be set.
220 UNDERSTANDING YOUR INSTRUMENT PANEL Outside Temperature If the outside temperature is more than 131°F (55°C), the display will show 131°F (55°C). When the outside temperature is less than ⫺40°F (⫺40°C), the display will show ⫺40°F (⫺40°C). RADIO GENERAL INFORMATION Radio Broadcast Signals The radio will provide excellent reception under most operating conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL Two Types of Signals There are two basic types of radio signals: AM or Amplitude Modulation, in which the transmitted sound causes the amplitude, or height, of the radio waves to vary; and FM or Frequency Modulation, in which the frequency of the wave is varied to carry the sound. Electrical Disturbances Radio waves may pick up electrical disturbances during transmission. They mainly affect the wave amplitude, and thus remain a part of the AM reception.
222 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RES — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to search for the next listenable station in AM or FM frequencies, pausing for five seconds at each listenable station before continuing to the next. To stop the search, press the SCAN button a second time.
224 UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure 1. Press and hold the TIME button, until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. 5. To exit, press any button/knob or wait five seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 Setting the Tone, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the bass tones. Push the rotary TUNE/SCROLL control knob a fifth time and FADE will display. Turn the TUNE/SCROLL control knob to the left or right to adjust the sound level between the front and rear speakers. Push the rotary TUNE/SCROLL control knob a second time and MID will display.
226 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button to select the following format types: Program Type No program type or undefined Adult Hits Classical Classic Rock College Country Foreign Language Information Jazz News Nostalgia Oldies 16-Digit Character Display None Adlt Hit Classicl Cls Rock College Country Language Inform Jazz News Nostalga Oldies Program Type Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk To
UNDERSTANDING YOUR INSTRUMENT PANEL station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station. SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow you to set the clock.
228 UNDERSTANDING YOUR INSTRUMENT PANEL Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC Button Pressing the DISC button will allow you to switch from AM/FM modes to Disc modes. Operation Instructions - CD MODE for CD and MP3 Audio Play NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player. Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
230 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF Press the RW button to stop the CD at the beginning of the current CD track/title. Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner.
UNDERSTANDING YOUR INSTRUMENT PANEL files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead.
232 UNDERSTANDING YOUR INSTRUMENT PANEL rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification Sampling Frequency (kHz) MPEG-1 Audio Layer 3 48, 44.1, 32 MPEG-2 Audio Layer 3 24, 22.
UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
234 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is OFF). Operating Instructions - Hands-Free Phone (UConnect威) (If Equipped) Refer to “Hands-Free Communication (UConnect威)” in Section 3. SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
236 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Button (UConnect威 Hands-Free Phone) — If Equipped Press this button to operate the Hands-Free Phone (UConnect威) feature (if equipped). Refer to “Hands-Free Communication (UConnect威)” in Section 3. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped With UConnect” message will display on the radio screen. TIME Button Press the TIME button and the time of day will display.
UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in AM, FM or Satellite (if equipped) frequencies. 237 Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones.
238 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Sports Talk Top 40 Weather 16-Digit Character Display Sports Talk Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station.
240 UNDERSTANDING YOUR INSTRUMENT PANEL • Audio Stream – Repeatedly pressing SELECT will switch to different audio languages (if supported on the disc) (if equipped). • VES威 CH1/CH2 - Allows the user to change the mode of either the IR1 or IR2, wireless headphones by pressing the AUDIO/SELECT button (if equipped). • Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped). • Set Home Clock - Pressing the SELECT button allows you to set the clock.
UNDERSTANDING YOUR INSTRUMENT PANEL Enter the four-digit country code using the TUNE/ SCROLL control knob to scroll up and down to select the number and then push to select. Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting ⬙other.
242 UNDERSTANDING YOUR INSTRUMENT PANEL auto-play the main title. In such cases, use the MENU button on the remote control to select desired title to play. NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the customer-preferred settings. AM and FM Buttons Press the buttons to select AM or FM Modes.
UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play, DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These region codes must match in order for the disc to play. If the region code for the DVD disc does not match the region code for the radio DVD player, it will not play the disc. Customers may take their vehicle to an authorized dealer to change the region code of the player a maximum of five times.
244 UNDERSTANDING YOUR INSTRUMENT PANEL Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) where the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙EJECTING DISC⬙ when the disc is being ejected and prompt the user to remove the disc. Press and hold the EJECT button for five seconds and all CDs will be ejected from the radio. The disc can be ejected with the radio and ignition OFF.
UNDERSTANDING YOUR INSTRUMENT PANEL Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however, acceptable MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the following restrictions.
246 UNDERSTANDING YOUR INSTRUMENT PANEL If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. MPEG Specification Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.MP3/WMA extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3/WMA and will not play the file.
UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files.
248 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds to return to ⬙elapsed time⬙ display. SCAN Button (Auxiliary Mode) No function. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3/WMA player, cassette player, or microphone and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 Operating Instructions — Voice Recognition System (VR) (If Equipped) For the radio, refer to “Voice Recognition System (VR)” in Section 3. Dolby威 Manufactured under license from Dolby威 Laboratories. ⬙Dolby威⬙ and the double-D symbol are trademarks of Dolby威 Laboratories. For UConnect威 “Voice Recognition System (VR),” refer to “Hands-Free Communication (UConnect威)” in Section 3.
250 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RER — MULTIMEDIA SYSTEM — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The RER Multimedia system contains a radio, Sirius Satellite Radio player, navigation system, CD/DVD player, USB port, 20-gigabyte hard drive (HDD), and the UConnect威 Hands-Free Bluetooth威 cellular system.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 Other special features include direct tune, music type selections, traffic messaging (optional), easy store presets, parental lockout for VES威 (if equipped), backup camera display for vehicles equipped with a backup camera, and on some models, a dual display screen operation. Refer to your “Navigation User’s Manual” for detailed operating instructions.
252 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Touch the screen where the words “Set Time Zone” are displayed. The time zone selection menu will appear on the screen. 5. Select a time zone by touching the screen where your selection appears. If you do not see a time zone that you want to select, touch the screen where the word “Page” is displayed to view additional time zones in the menu. Changing Daylight Savings Time When selected, this feature will display the time of day in daylight savings time.
UNDERSTANDING YOUR INSTRUMENT PANEL 4. To move the hour forward, touch the screen where the word “Hour” with the arrow pointing upward is displayed. To move the hour backward, touch the screen where the word “Hour” with the arrow pointing downward is displayed. 5. To move the minute forward, touch the screen where the word “Min” with the arrow pointing upward is displayed. To move the minute backward, touch the screen where the word “Min” with the arrow pointing downward is displayed. 6.
254 UNDERSTANDING YOUR INSTRUMENT PANEL System Activation Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account at no additional charge.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 Selecting Satellite Mode Press the SAT button until ⬙SAT⬙ appears in the display. A CD may remain in the radio while in the Satellite radio mode. • Dense tree coverage may interrupt reception in the form of short audio mutes. Satellite Antenna To ensure optimum reception, do not place items on the roof around the rooftop antenna location or strap items to the trunk lid around the trunk lid antenna (if equipped).
256 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds before continuing to the next. To stop the search, press the SCAN button a second time. INFO Button Pressing the INFO button will cycle between Artist, Song Title, and Composer (if available) information.
UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number. This number is used to activate, deactivate, or change the Sirius subscription. SET Button – To Set the Pushbutton Memory When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. The symbol SET 1 will now show in the display window.
258 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Video Entertainment System (VES姞) (If Equipped) Refer to separate “Video Entertainment System (VES威) Guide.” CD/DVD DISC MAINTENANCE To keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3.
UNDERSTANDING YOUR INSTRUMENT PANEL CLIMATE CONTROLS 259 Mode Control The mode control allows you to choose from several patterns of air distribution. You can select either a primary mode, as identified by the symbols, or a blend of two of these modes. The closer the control is to a particular mode, the more air distribution you receive from that Manual Heater Only The controls for the heating/ventilation system in this vehicle consist of a series of rotary knobs.
260 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: There is a difference in temperature between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets. This feature gives improved comfort during sunny but cool conditions. Floor Air is directed through the floor outlets and side window demist outlets with a small amount through the defrost outlet. Mix Air is directed through the floor, defrost and side window demist outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL Manual Air Conditioning and Heating System — If Equipped The controls for the heating/air conditioning and ventilation system in this vehicle consist of a series of rotary knobs. These comfort controls can be set to obtain desired interior conditions. 261 The instrument panel features four airflow registers. Two registers are located on the outer ends of the instrument panel and two are located in the center of the instrument panel.
262 UNDERSTANDING YOUR INSTRUMENT PANEL Panel Air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. cold or snowy conditions that require extra heat at the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield. Bi-Level Air is directed through the panel and floor outlets. Defrost Air is directed through the windshield and side window demist outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL Blower Control Use this control to regulate the amount of air forced through the system in any mode you select. The fan speed increases as you move the control to the right from the OFF position. Temperature Control Use this control to regulate the temperature of the air inside the passenger compartment. The blue area of the scale indicates cooler temperatures while the red area indicates warmer temperatures.
264 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Continuous use of the “Recirculate” mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended. In cold or damp weather, the use of the “Recirculate” mode will cause windows to fog on the inside because of moisture buildup inside the vehicle. For maximum defogging, select the Outside Air position. NOTE: The “Recirculate” mode will not operate in floor, mix or defrost modes.
UNDERSTANDING YOUR INSTRUMENT PANEL MAX A/C 265 Operating Tips For maximum cooling, select either the Panel or Bi-Level position using the mode control. Then, press the “A/C” and the “Recirculate” buttons so that both lamps are illuminated, and set the temperature control to its coolest setting. NOTE: • Recirculation Mode will not operate in floor, mix or defrost modes. • Refer to “Recirculation Control” in this section, for proper or extended use of this position.
266 UNDERSTANDING YOUR INSTRUMENT PANEL Regular cleaning of the inside of the windows with a non-filming cleaning solution (vinegar and water works very well) will help prevent contaminates (cigarette smoke, perfumes, etc.) from sticking to the windows. Contaminates increase the rate of window fogging.
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . . 271 䡵 Manual Transmission . . . . . . . . . . . . . . . . . . . . 275 ▫ Manual Transmission . . . . . . . . . . . . . . . . . . 271 ▫ Shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 271 ▫ Downshifting . . . . . . . . . . . . . . . . . . . . . . . . 277 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . .
268 STARTING AND OPERATING 䡵 Four–Wheel Drive Operation (Command-Trac™ Or Rock-Trac™) — If Equipped . . . . . . . . . . . . . 285 ▫ Operating Instructions/Precautions . . . . . . . . . 285 ▫ Shift Positions . . . . . . . . . . . . . . . . . . . . . . . . 287 ▫ When To Use 4L (Low) Range . . . . . . . . . . . . 297 ▫ Simultaneous Brake And Throttle Operation . . 297 ▫ Driving In Snow, Mud And Sand . . . . . . . . . . 297 ▫ Shifting Procedure . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 269 ▫ Tire Identification Number (TIN) . . . . . . . . . . 316 䡵 Tire Rotation Recommendations . . . . . . . . . . . . 329 ▫ Tire Loading And Tire Pressure . . . . . . . . . . . 317 䡵 Tire Pressure Monitor System (TPMS) . . . . . . . . 330 䡵 Tires — General Information . . . . . . . . . . . . . . . 321 ▫ Base System . . . . . . . . . . . . . . . . . . . . . . . . . 333 ▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . . . 321 ▫ General Information . . . . . . . .
270 STARTING AND OPERATING 䡵 Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . . . 342 ▫ Trailer And Trailer Tongue Weight . . . . . . . . . 352 ▫ Certification Label . . . . . . . . . . . . . . . . . . . . . 342 ▫ Towing Requirements . . . . . . . . . . . . . . . . . . 353 䡵 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . 344 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . . 357 ▫ Common Towing Definitions . . . . . . . . . . . . .
STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. WARNING! Do not leave children or animals inside parked vehicles in hot weather. Interior heat buildup may cause serious injury or death. Manual Transmission Apply the parking brake, place the shift lever in NEUTRAL and depress the clutch pedal before starting vehicle. This vehicle is equipped with a clutch interlocking ignition system.
272 STARTING AND OPERATING Turn the ignition switch to the START position and release when the engine starts. If the engine fails to start within 10 seconds, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the normal starting procedure. Tip Start Feature — Automatic Transmission Only Turn the ignition switch to START position and release it as soon as the starter engages.
STARTING AND OPERATING If Engine Fails to Start WARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury. • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
274 STARTING AND OPERATING If the engine shows no sign of starting after two 15 second periods of cranking with the accelerator pedal held to the floor, repeat the “Normal Starting” or “Extreme Cold Weather” procedures. With Tip Start (Automatic Transmission Only) If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” procedures, it may be flooded. To clear any excess fuel, push the accelerator pedal all the way to the floor and hold it.
STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded, three wire extension cord. The engine block heater cord is found under the hood bundled in front of the battery tray. WARNING! Remember to disconnect the cord before driving. Damage to the 110-115 Volt AC electrical cord could cause electrocution.
276 STARTING AND OPERATING NOTE: During cold weather, you may experience increased effort in shifting until the transmission fluid warms up. This is normal. Shifting Fully depress the clutch pedal before shifting gears. As you release the clutch pedal, lightly depress the accelerator pedal. You should always use 1st gear when starting from a standing position if under heavy load or when pulling a trailer.
STARTING AND OPERATING Manual Transmission Shift Speeds in MPH (KM/H) EnSpeeds 1 to 2 2 to 3 3 to 4 4 to 5 5 to 6 gine 3.8L Accel. 15 (24) 24 34 47 56 (39) (55) (76) (90) Cruise 10 (16) 19 27 37 41 (31) (43) (60) (66) Downshifting Moving from a high gear down to a lower gear is recommended to preserve brakes when driving down steep hills. In addition, downshifting at the right time provides better acceleration when you desire to resume speed. Downshift progressively.
278 STARTING AND OPERATING Maximum Recommended Downshift Speeds CAUTION! Failure to follow the maximum recommended downshifting speeds may cause the engine to overspeed and/or damage the clutch disc even if the clutch pedal is depressed. Manual Transmission Downshift Speeds in MPH (KM/H) Gear Selec6 to 5 5 to 4 4 to 3 3 to 2 2 to 1 tion Maxi80 (129) 70 (113) 50 (81) 30 (48) 15 (24) mum Speed Reverse Shifting To shift into REVERSE, bring the vehicle to a complete stop.
STARTING AND OPERATING AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed.
280 STARTING AND OPERATING Shift Lock Manual Override Your vehicle may be equipped with a shift lock manual override. The manual override may be used in the event that the shift lever should fail to move from PARK with the key in the ON position and the brake pedal depressed. To operate the shift lock manual override, perform the following steps: 1. Firmly set the parking brake. 2.
STARTING AND OPERATING 281 Brake/Transmission Interlock System This system prevents you from moving the shift lever out of PARK and into any gear unless the brake pedal is pressed. This system is active only while the ignition switch is in the ON position. Always depress the brake pedal first, before moving the shift lever out of PARK.
282 STARTING AND OPERATING PARK This gear position supplements the parking brake by locking the transmission. The engine can be started in this range. Never use PARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. Always apply parking brake first, then place the shift lever in the PARK position. WARNING! Never use the PARK position as a substitute for the parking brake.
STARTING AND OPERATING NOTE: Towing, coasting, or driving the vehicle for any other reason with the shift lever in NEUTRAL can result in severe transmission damage. Refer to “Recreational Towing” in Section 5 and “Towing a Disabled Vehicle” in Section 6 of this manual. OVERDRIVE For most city and highway driving.
284 STARTING AND OPERATING Overdrive can be locked out by pressing the O/D OFF switch located on the center console. The O/D OFF indicator light (on the switch) will illuminate to show that the switch has been activated. When the indicator light is on, Overdrive is locked out. Pressing the switch a second time restores the Overdrive function. The lockout feature is useful when towing a trailer or carrying a heavy load.
STARTING AND OPERATING 285 Torque Converter Clutch A feature designed to improve fuel economy has been added to the automatic transmission of this vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly different feeling or response during normal operation in high gear. When the vehicle speed drops or during acceleration, the clutch automatically and smoothly disengages.
286 STARTING AND OPERATING rear wheels to rotate at the same speed. This is accomplished by simply moving the shift lever to one of these positions. The 4H and 4L positions are intended for loose, slippery road surfaces only, and not intended for normal driving. Driving in the 4H and 4L positions on hard surfaced roads will cause increased tire wear and damage to the driveline components.
STARTING AND OPERATING WARNING! You or others could be injured if you leave the vehicle unattended with the transfer case in the N (Neutral) position without first fully engaging the parking brake. The transfer case N (Neutral) position disengages both the front and rear driveshaft from the powertrain, and will allow the vehicle to move regardless of the transmission position. The parking brake should always be applied when the driver is not in the vehicle.
288 STARTING AND OPERATING N (Neutral) Position This range disengages the front and rear driveshafts from the powertrain. To be used for flat towing behind another vehicle. Refer to “Recreational Towing” in Section 5 of this manual. 4L Position This range locks the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same speed. This range (4L) provides additional traction and maximum pulling power for loose, slippery road surfaces only. Do not exceed 25 mph (40 km/h).
STARTING AND OPERATING 4H to 4L or 4L to 4H With the vehicle rolling at 2 to 3 mph (3 to 5 km/h), shift an automatic transmission into NEUTRAL (N), or depress the clutch pedal on a manual transmission. While the vehicle is coasting at 2 to 3 mph (3 to 5 km/h), shift the transfer case lever firmly to the desired position. Do not pause with the transfer case in N (Neutral).
290 STARTING AND OPERATING Trac-Lok™ is especially helpful during slippery driving conditions. With both rear wheels on a slippery surface, a slight application of the accelerator will supply maximum traction. AXLE LOCK (TRU–LOK™) — RUBICON MODELS The AXLE LOCK switch is located on the lower switch bank (below the climate controls). WARNING! On vehicles equipped with a limited-slip differential, never run the engine with one rear wheel off the ground.
STARTING AND OPERATING • Vehicle speed should be 10 mph (16 km/h) or less. To activate the system, press the bottom of the AXLE LOCK switch once to lock the rear axle only (the Rear Axle Lock Indicator Light will illuminate), press the bottom of the switch again to lock the front axle (the Front Axle Lock Indicator Light will illuminate). When the rear axle is locked, pressing the switch again will lock or unlock the front axle.
292 STARTING AND OPERATING The rear axle lock will disengage if the vehicle is taken out of 4L (Low) range, or the ignition switch is turned to the OFF position. ELECTRONIC SWAY BAR DISCONNECT — IF EQUIPPED Your vehicle may be equipped with an electronic disconnecting stabilizer/sway bar. This system allows greater front suspension travel in off-road situations. This system is controlled by the electronic control SWAY BAR switch located on the lower switch bank (below the climate controls).
STARTING AND OPERATING when activation conditions are not met. The stabilizer/ sway bar should remain in on-road mode during normal driving conditions. WARNING! Do not disconnect the stabilizer bar and drive on hard surfaced roads or at speeds above 18 mph (29 km/h), you may lose control of the vehicle, which could result in serious injury. The front stabilizer bar enhances vehicle stability and is necessary for maintaining control of the vehicle.
294 STARTING AND OPERATING WARNING! If the stabilizer/sway bar will not return to on-road mode, vehicle stability is greatly reduced. Do not attempt to drive vehicle over 18 mph (29 km/h). Driving faster than 18 mph (29 km/h) may cause loss of control of the vehicle, which could result in serious injury. Contact your local authorized dealer for assistance. An advantage of the higher ground clearance is a better view of the road, allowing you to anticipate problems.
STARTING AND OPERATING 295 5 2. Remove one bolt from underside of vehicle. 3. Remove side step assembly.
296 STARTING AND OPERATING The Basics of Off-Road Driving You will encounter many types of terrain driving offroad. You should be familiar with the terrain and area before proceeding. There are many types of surface conditions: hard packed dirt, gravel, rocks, grass, sand, mud, snow and ice. Every surface has a different effect on your vehicle’s steering, handling and traction.
STARTING AND OPERATING When To Use 4L (Low) Range When off-road driving, shift into 4L (Low) for additional traction and control on slippery or difficult terrain, ascending or descending steep hills, and to increase low speed pulling power. This range should be limited to extreme situations such as deep snow, mud, steep inclines, or sand where additional low speed pulling power is needed. Vehicle speeds in excess of 25 mph (40 km/h) should be avoided when in 4L (Low) range.
298 STARTING AND OPERATING Mud Deep mud creates a great deal of suction around the tires and is very difficult to get through. You should use 2nd gear (manual transmission), or DRIVE (automatic transmission), with the transfer case in the 4L (Low) position to maintain your momentum. If you start to slow to a stop, try turning your steering wheel no more than a 1/4 turn quickly back and forth for additional traction. Mud holes pose an increased threat of vehicle damage and getting stuck.
STARTING AND OPERATING Crossing Obstacles (Rocks And Other High Points) While driving off-road, you will encounter many types of terrain. These varying types of terrain bring different types of obstacles. Before proceeding, review the path ahead to determine the correct approach and your ability to safely recover the vehicle if something goes wrong. Keeping a firm grip on the steering wheel, bring the vehicle to a complete stop and then inch the vehicle forward until it makes contact with the object.
300 STARTING AND OPERATING CAUTION! Never attempt to straddle a rock that is large enough to strike your axles or undercarriage. CAUTION! Never attempt to drive over a rock which is large enough to contact the door sills. Crossing A Ravine, Gully, Ditch, Washout Or Rut When crossing a ravine, gully, ditch, washout or a large rut, the angled approach is the key to maintaining your vehicle’s mobility. Approach these obstacles at a 45degree angle and let each tire go through the obstacle independently.
STARTING AND OPERATING 301 accelerator to avoid spinning the log out from under your tires. Then ease the vehicle off the log using your brakes. CAUTION! CAUTION! Winching or rocking the vehicle off hard objects increases the risk of underbody damage. Do not attempted to cross a log with a greater diameter than the running ground clearance or the vehicle will become high centered.
302 STARTING AND OPERATING branches or other obstacles on the path? Can you safely recover the vehicle if something goes wrong? If everything looks good and you feel confident, shift the transmission into a lower gear with 4L (Low) engaged, and proceed with caution maintaining your momentum as you climb the hill. Driving Up Hill Once you have determined your ability to proceed and have shifted into the appropriate gear, line your vehicle up for the straightest possible run.
STARTING AND OPERATING descent? Is there plenty of distance at the base of the hill to regain control if the vehicle descends to fast? If you feel confident in your ability to proceed then make sure you are in 4L (Low) and proceed with caution. Allow engine braking to control the descent and apply your brakes if necessary, but do not allow the tires to lock. WARNING! Do not descend a steep grade in NEUTRAL. Use vehicle brakes in conjunction with engine braking.
304 STARTING AND OPERATING WARNING! If the engine stalls or you lose headway or cannot make it to the top of a steep hill or grade, never attempt to turn around. To do so may result in tipping and rolling the vehicle, which may result in severe injury. Always back carefully straight down a hill in REVERSE gear. Never back down a hill in NEUTRAL using only the vehicle brakes. Never drive diagonally across a hill, always drive straight up or down.
STARTING AND OPERATING CAUTION! Water ingestion into the axles, transmission, transfer case, engine or vehicle interior can occur if you drive too fast or through too deep of water. Water can cause permanent damage to engine, driveline or other vehicle components and your brakes will be less effective once wet and/or muddy. Before You Cross Any Type Of Water As you approach any type of water you need to determine if you can cross it safely and responsibly.
306 STARTING AND OPERATING CAUTION! Muddy waters can reduce the cooling system effectiveness by depositing debris onto the radiator. Crossing Ditches, Streams, Shallow Rivers Or Other Flowing Water Flowing water can be extremely dangerous. Never attempt to cross a fast running stream or river even in shallow water. Fast moving water can easily push your vehicle downstream sweeping it out of control.
STARTING AND OPERATING After Driving Off-Road Off-road operation puts more stress on your vehicle than does most on-road driving. After going off-road it is always a good idea to check for damage. That way you can get any problems taken care of right away and have your vehicle ready when you need it. • Completely inspect the underbody of your vehicle. Check tires, body structure, steering, suspension, and exhaust system for damage.
308 STARTING AND OPERATING PARKING BRAKE To set the parking brake, pull the lever up as firmly as possible. When the parking brake is applied with the ignition ON, the Brake Warning Light in the instrument cluster will light. To release the parking brake, pull up slightly, press the center button, then lower the lever completely. NOTE: The instrument cluster Brake Warning Light indicates only that the parking brake is applied. You must be sure the parking brake is fully applied before leaving the vehicle.
STARTING AND OPERATING the load on the transmission locking mechanism may make it difficult to move the shifter out of PARK. WARNING! • Always fully apply the parking brake when leaving your vehicle, or it may roll and cause damage or injury. Also, be certain to leave an automatic transmission in PARK, a manual transmission in REVERSE or 1st gear. Failure to do so may allow the vehicle to roll and cause damage or injury. • Never leave children alone in a vehicle.
310 STARTING AND OPERATING WARNING! Significant over or under-inflation of tires, or mixing sizes of tires or wheels on the vehicle can lead to loss of braking effectiveness. The Anti-Lock Brake System conducts a low speed selftest at about 12 mph (20 km/h). If for any reason, your foot is on the brake when the vehicle reaches 12 mph (20 km/h), this check will be delayed until 25 mph (40 km/h).
STARTING AND OPERATING 311 WARNING! CAUTION! • Anti-Lock Brake Systems (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. The Anti-Lock Brake System is subject to possible detrimental effects of electronic interference caused by improperly installed aftermarket radios or telephones.
312 STARTING AND OPERATING If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers. Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible.
STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings 313 • European Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation. Example: 215/65R15 96H • LT(Light Truck)-Metric tire sizing is based on U.S. design standards.
314 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm) 65 = Aspect Ratio in Percent (%) —Ratio of section height to section width of tire 10.
STARTING AND OPERATING 315 EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —The maximum speed corresponding to the Speed Symbol should only be achieved under specified operating conditions (ie.
316 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side then you will find it on the inboard side of the tire.
STARTING AND OPERATING 317 Tire Loading and Tire Pressure Tire Placard Location 5 Tire Placard Location (Four-Door Models) Tire Placard Location (Two-Door Models)
318 STARTING AND OPERATING Tire and Loading Information Placard 4) cold tire inflation pressures for the front, rear and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size and cold tire inflation pressures specified on the Tire and Loading Information placard and the Vehicle Loading section of this manual.
STARTING AND OPERATING 319 lbs.” on the Tire and Loading Information placard. The combined weight of occupants, cargo/luggage and trailer tongue weight (if applicable) should never exceed the weight referenced here. 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4. Steps for Determining Correct Load Limit 6.
320 STARTING AND OPERATING
STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
322 STARTING AND OPERATING Economy Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under-inflation also increases tire rolling resistance and results in higher fuel consumption. Tire Inflation Pressures Ride Comfort and Vehicle Stability Proper tire inflation contributes to a comfortable ride. Over-inflation produces a jarring and uncomfortable ride.
STARTING AND OPERATING 323 CAUTION! After inspecting or adjusting the tire pressure always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the Tire Pressure Monitoring Sensor. Tire Placard Location (Four-Door Models) Tire pressure should be checked and adjusted as well as inspecting for signs of tire wear or visible damage, at least once a month. Use a good quality pocket-type gauge to check tire pressure.
324 STARTING AND OPERATING Tire pressures change by approximately 1 psi (7 kPa) per 12° F (7° C) of air temperature change. Keep this in mind when checking tire pressure inside a garage especially in the winter. Example: If garage temperature = 68° F (20° C) and the outside temperature = 32° F (0° C) then the cold tire inflation pressure should be increased by 3 psi (21 kPa), which equals 1 psi (7 kPa) for every 12° F (7° C) for this outside temperature condition.
STARTING AND OPERATING Radial-Ply Tires WARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly. The instability could cause an accident. Always use radial tires in sets of four. Never combine them with other types of tires. Cuts and punctures in radial tires are repairable only in the tread area because of sidewall flexing. Consult your authorized dealer for radial tire repairs.
326 STARTING AND OPERATING Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves and will appear as bands when the tread depth becomes 1/16 inch (2 mm). When the indicators appear in two or more adjacent grooves, the tire should be replaced. Many states have laws requiring tire replacement at this point.
STARTING AND OPERATING WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an accident resulting in serious injury or death. Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease and gasoline.
328 STARTING AND OPERATING WARNING! CAUTION! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death.
STARTING AND OPERATING Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-ofbalance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear. TIRE CHAINS Install chains on rear tires only. Tire chains may be installed on all models except the Sahara and Rubicon. Follow these recommendations to guard against damage and excessive tire and chain wear: • Use chains on P225/75R16 tires only.
330 STARTING AND OPERATING Follow the recommended tire rotation frequency for your type of driving. Refer to the “Maintenance Schedule” in Section 8 of this manual. More frequent rotation is permissible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being performed. The suggested rotation method is the “forward-cross” shown in the following diagram.
STARTING AND OPERATING The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low pressure warning threshold for any reason, including low temperature effects, or natural pressure loss through the tire. The TPMS will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above recommended cold placard pressure.
332 STARTING AND OPERATING CAUTION! CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
STARTING AND OPERATING • The TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the Tire Pressure Monitoring Telltale Light. • Seasonal temperature changes will affect tire pressure, and the TPM System will monitor the actual tire pressure in the tire.
334 STARTING AND OPERATING inflation pressure of each tire on your vehicle, and inflate each tire to the vehicle’s recommended cold placard pressure value. The system will automatically update and the Tire Pressure Monitoring Telltale Light will extinguish once the updated tire pressures have been received. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this information.
STARTING AND OPERATING NOTE: If your vehicle is not equipped with a matching full-size spare wheel and tire assembly, it does not have a tire pressure monitoring sensor in the spare tire. The TPMS will not be able to monitor the tire pressure. If you install the spare tire in place of a road tire that has a pressure below the low-pressure warning limit, upon the next ignition key cycle, a chime will sound and the Tire Pressure Monitoring Telltale Light will turn ON.
336 STARTING AND OPERATING FUEL REQUIREMENTS All engines (except 5.7L engines) are designed to meet all emissions regulations and provide excellent fuel economy and performance when using high quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not recommended. Under normal conditions, the use of premium gasoline will not provide a benefit over high quality regular gasoline, and in some circumstances may result in poorer performance.
STARTING AND OPERATING 337 The manufacturer supports the use of reformulated gasoline. Properly blended reformulated gasoline will provide excellent performance and durability for the engine and fuel system components. Problems that result from using methanol/gasoline blends are not the responsibility of the manufacturer. While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol.
338 STARTING AND OPERATING It is even more important to look for gasoline without MMT in Canada, because MMT can be used at levels higher than those allowed in the United States. MMT is prohibited reformulated gasoline. in Federal and California- Materials Added To Fuel All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives are not needed under normal conditions and would result in additional cost.
STARTING AND OPERATING • The use of fuel additives which are now being sold as octane enhancers is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufacturer. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
340 STARTING AND OPERATING ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located on the driver’s side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Fuel Filler Cap Loose Fuel Filler Cap Message (gASCAP) After fuel has been added, the vehicle diagnostic system can determine if the fuel filler cap is possibly loose, improperly installed, or damaged.
STARTING AND OPERATING 341 CAUTION! WARNING! Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting aftermarket cap can cause the Malfunction Indicator Light to illuminate, due to fuel vapors escaping from the system. • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled.
342 STARTING AND OPERATING WARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. VEHICLE LOADING Certification Label As required by National Highway Traffic Safety Administration regulations, your vehicle has a certification label affixed to the driver’s side door or B-Pillar.
STARTING AND OPERATING Each axle’s GAWR is determined by the components in the system with the lowest load carrying capacity (axle, springs, tires, or wheels). Heavier axles or suspension components, sometimes specified by purchasers for increased durability, does not necessarily increase the vehicle’s GVWR. Tire Size The tire size on the label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size.
344 STARTING AND OPERATING the front or rear axles has been exceeded, but the total load is within the specified GVWR. If so, weight must be shifted from front to rear, or rear to front, as appropriate until the specified weight limitations are met. Store the heavier items down low and be sure that the weight is distributed equally. Stow all loose items securely before driving.
STARTING AND OPERATING Common Towing Definitions The following trailer towing-related definitions will assist you in understanding the following information: Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, cargo and trailer tongue weight. The total load must be limited so that you do not exceed the GVWR.
346 STARTING AND OPERATING Trailer Tongue Weight (TW) The trailer tongue weight is the downward force exerted on the hitch ball by the trailer. In most cases it should not be less than 10% or more than 15% of the trailer load. You must consider this as part of the load on your vehicle. Frontal Area The frontal area is the maximum height and maximum width of the front of a trailer.
STARTING AND OPERATING 347 WARNING! An improperly adjusted weight-distributing hitch system may reduce handling, stability, braking performance, and could result in an accident. Weight-Distributing Hitch Systems may not be compatible with Surge Brake Couplers. Consult with your hitch and trailer manufacturer or a reputable Recreational Vehicle dealer for additional information.
348 STARTING AND OPERATING Refer to the Trailer Towing Weights (Maximum Trailer Weight Ratings) chart for the Max. GTW towable for your given drivetrain. Trailer Hitch Classification Class Max. GTW (Gross Trailer Wt.) Class I - Light Duty 2,000 lbs (907 kg) Class II - Medium 3,500 lbs (1 587 kg) Duty All trailer hitches should be professionally installed on your vehicle.
STARTING AND OPERATING Engine/ Transmission Axle Model 3.8L/Manual 3.21 3.8L/Manual 3.73 3.8L/ Automatic 3.8L/Manual 3.73 3.21 3.8L/Manual 3.73 3.8L/ Automatic 3.8L/Manual 3.73 2–Door X Model (4WD) 2–Door X Model (4WD) 2–Door X Model (4WD) 2–Door Sahara Model (4WD) 2–Door Sahara Model (4WD) 2–Door Sahara Model (4WD) 2–Door Rubicon Model (4WD) 4.10 GCWR (Gross Combined Wt.
350 STARTING AND OPERATING 3.8L/ Automatic 4.10 3.8L/Manual 3.21 3.8L/Manual 3.73 3.8L/ Automatic 3.8L/Manual 3.73 3.8L/Manual 3.73 3.8L/ Automatic 3.8L/Manual 3.73 3.8L/Manual 3.73 3.21 3.21 2–Door Rubicon Model (4WD) 4–Door X Model (2WD) 4–Door X Model (2WD) 4–Door X Model (2WD) 4–Door Sahara Model (2WD) 4–Door Sahara Model (2WD) 4–Door Sahara Model (2WD) 4–Door X Model (4WD) 4–Door X Model (4WD) 6,281 lbs (2 849 kg) 25 sq ft (2.
STARTING AND OPERATING 3.8L/ Automatic 3.8L/Manual 3.73 3.8L/Manual 3.73 3.8L/ Automatic 3.8L/Manual 3.73 3.8L/ Automatic 4.10 3.21 4.10 4–Door X 7,825 lbs 32 sq ft 3,500 lbs Model (4WD) (3 549 kg) (2.97 sq m) (1 587 kg) 4–Door Sahara 5,481 lbs 32 sq ft 1,000 lbs Model (4WD) (2 486 kg) (2.97 sq m) (453 kg) 4–Door Sahara 7,981 lbs 32 sq ft 3,500 lbs Model (4WD) (3 620 kg) (2.97 sq m) (1 587 kg) 4–Door Sahara 8,027 lbs 32 sq ft 3,500 lbs Model (4WD) (3 641 kg) (2.
352 STARTING AND OPERATING Trailer and Trailer Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side-to-side which will cause loss of control of vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer accidents.
STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the Tire and Loading Information placard in the “Tire Safety Information” section of this manual for the maximum combined weight of occupants and cargo for your vehicle.
354 STARTING AND OPERATING WARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have an accident.
STARTING AND OPERATING 2. GTW 3. GAWR 4. Tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). Towing Requirements — Tires − Do not attempt to tow a trailer while using a compact spare tire. − Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle.
356 STARTING AND OPERATING − An electronically-actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge-actuated brake system, an electronic brake controller is not required. − Trailer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trailers in excess of 2,000 lbs (907 kg). WARNING! Do not connect trailer brakes to your vehicle’s hydraulic brake lines.
STARTING AND OPERATING 357 The Trailer Tow Package will include a 4–pin wiring harness. Use a factory-approved trailer harness and connector. NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustration. 5 4 - Pin Connector Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic.
358 STARTING AND OPERATING If using a manual transmission vehicle for trailer towing, all starts must be in 1st gear to avoid excessive clutch slippage. Towing Tips — Automatic Transmission The DRIVE range can be selected when towing. However, if frequent shifting occurs while in this range, the OVERDRIVE range should be selected.
STARTING AND OPERATING Towing Tips — Cooling System To reduce potential for engine and transmission overheating, take the following actions: − Highway Driving Reduce speed. − Air Conditioning Turn off temporarily. − refer to Cooling System Operating information in the Maintenance section of this manual for more information. 359 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) CAUTION! Front or rear wheel lifts should not be used.
360 STARTING AND OPERATING Towing – 4WD Models 4. Start engine. NOTE: The transfer case must be shifted into N (Neutral) for recreational towing. 5. Shift automatic transmission into DRIVE or manual transmission into gear. Shifting Into Neutral (N) Use the following procedure to prepare your vehicle for recreational towing. 6. Release brake pedal and ensure that there is no vehicle movement.
STARTING AND OPERATING CAUTION! Damage to the transmission may occur if the transmission is shifted into PARK with the transfer case in N (Neutral) and the engine running. With the transfer case in N (Neutral) ensure that the engine is off prior to shifting the transmission into PARK (refer to steps 7 – 8 above). Shifting Out Of Neutral (N) Use the following procedure to prepare your vehicle for normal usage. 1. Shift automatic transmission into NEUTRAL or depress clutch pedal on manual transmission. 2.
362 STARTING AND OPERATING CAUTION! • Do not use a bumper-mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . . 364 ▫ Preparations For Jacking . . . . . . . . . . . . . . . . 367 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . . 365 ▫ Jacking Instructions . . . . . . . . . . . . . . . . . . . . 368 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . . 366 䡵 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . 371 ▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . . .
364 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS Your vehicle’s hazard warning flasher is an emergency warning system. When you activate it, all front and rear directional signals will flash intermittently. Use it when your vehicle is disabled on or near the road. It warns other drivers to steer clear of you and your vehicle. This is an emergency warning system, not to be used when the vehicle is in motion.
WHAT TO DO IN EMERGENCIES IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce the potential for overheating by taking the appropriate action. • On the highways — Slow down. • In city traffic — While stopped, shift transmission into NEUTRAL, but do not increase engine idle speed. NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off.
366 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. Jack Location The jack and lug wrench are located in the rear storage compartment. Refer to “Storage” in Section 3 of this manual.
WHAT TO DO IN EMERGENCIES Spare Tire Stowage To remove the spare tire from the carrier, remove the tire cover, if equipped, and remove the lug nuts with the lug wrench turning them counterclockwise. NOTE: If you have added aftermarket accessories to the spare tire mounted carrier, it cannot exceed a gross weight of 50 lbs (23 kg) including the weight of the spare tire.
368 WHAT TO DO IN EMERGENCIES Jacking Instructions Jack Warning Label WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly, and shift a automatic transmission into PARK; or a manual transmission into REVERSE.
WHAT TO DO IN EMERGENCIES 369 1. Remove spare tire, jack and tools from stored location. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 3. Assemble the jack and jacking tools. Connect jack handle driver to extension, then to lug wrench. 4. Operate jack from the front or the rear of the vehicle. Place the jack under the axle tube, as shown. Do not raise the vehicle until you are sure the jack is fully engaged.
370 WHAT TO DO IN EMERGENCIES WARNING! Raising the vehicle higher than necessary can make the vehicle less stable and cause an accident. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the lug nuts and wheel. 7. Position spare wheel/tire on vehicle and install lug nuts with cone-shaped end toward wheel. Lightly tighten nuts clockwise.
WHAT TO DO IN EMERGENCIES JUMP STARTING If the vehicle has a discharged battery, booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. This type of start can be dangerous if done improperly, so follow this procedure carefully. 371 WARNING! Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or clothing. Don’t lean over battery when attaching clamps or allow the clamps to touch each other.
372 WHAT TO DO IN EMERGENCIES 2. Park the booster vehicle within cable reach but without letting the vehicles touch. Set the parking brake on both vehicles, shift the automatic transmission into PARK, or the manual transmission into NEUTRAL, and turn the ignition OFF. 3. Turn off the heater, radio, and all unnecessary electrical loads. 4. Connect one end of a jumper cable to the positive terminal of the booster battery.
WHAT TO DO IN EMERGENCIES WARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster vehicle or of immobilized vehicle. 373 WARNING! • You should not try to start your vehicle by pushing or towing. • Do not connect the cable to the negative post of the discharge battery.
374 WHAT TO DO IN EMERGENCIES EMERGENCY TOW HOOKS — IF EQUIPPED If your vehicle is equipped with tow hooks, they are mounted in the front and the rear. CAUTION! Tow hooks are for emergency use only, to rescue a vehicle stranded off road. Do not use tow hooks for tow truck hookup or highway towing. You could damage your vehicle. Tow straps are recommended when towing the vehicle, chains may cause vehicle damage. WARNING! Stand clear of vehicles when pulling with tow hooks.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment – 3.8L . . . . . . . . . . . . . . . 378 ▫ Drive Belts — Check Condition And Tension . . 386 䡵 Onboard Diagnostic System — OBD II . . . . . . . . 379 ▫ Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . 386 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . . 380 ▫ Catalytic Converter . . . . . . . . . . . . . . . . . . . . 386 䡵 Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . .
376 MAINTAINING YOUR VEHICLE ▫ Driveline And Steering Component Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . 392 ▫ Body Lubrication . . . . . . . . . . . . . . . . . . . . . 392 ▫ Front/Rear Axle Fluid . . . . . . . . . . . . . . . . . . 405 ▫ Maintenance After Off-Road Driving . . . . . . . . 405 ▫ Windshield Wiper Blades . . . . . . . . . . . . . . . . 392 ▫ Appearance Care And Protection From Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 377 ▫ Center High-Mounted Stop Light (CHMSL) . . . 423 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 䡵 Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . 424 ▫ Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425 䡵 Fluids, Lubricants And Genuine Parts . . . . . . . .
378 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT – 3.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
380 MAINTAINING YOUR VEHICLE Loose Fuel Filler Cap Message After fuel is added, the vehicle diagnostic system can determine if the fuel filler cap is possibly loose, improperly installed, or damaged. A “gASCAP” message will be displayed in the odometer. Tighten the gas cap until a ⬙clicking⬙ sound is heard. This is an indication that the gas cap is properly tightened. Press the odometer reset button to turn the message off.
MAINTAINING YOUR VEHICLE Your vehicle has a simple ignition key-actuated test, which you can use prior to going to the test station. To check if your vehicle’s OBD II system is ready, you must do the following: 1. Insert your ignition key into the ignition switch. 2. Turn the ignition to the ON position, but do not crank or start the engine. 3. If you crank or start the engine, you will have to start this test over. 4.
382 MAINTAINING YOUR VEHICLE serviced before going to the I/M station. The I/M station can fail your vehicle because the MIL is on with the engine running. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. REPLACEMENT PARTS Use of genuine MOPAR威 parts for normal/scheduled maintenance and repairs is highly recommended to ensure the designed performance.
MAINTAINING YOUR VEHICLE MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides the maintenance items for which there are fixed maintenance intervals, there are other items that should operate satisfactorily without periodic maintenance. However, if a malfunction of these items does occur, it could adversely affect the engine or vehicle performance.
384 MAINTAINING YOUR VEHICLE CAUTION! Overfilling or underfilling the crankcase will cause aeration or loss of oil pressure. This could damage your engine. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils. Change Engine Oil Refer to the Maintenance Schedule in Section 8 for recommended engine oil change intervals.
MAINTAINING YOUR VEHICLE 385 Lubricants which do not have both, the engine oil certification mark and the correct SAE viscosity grade number, should not be used. authorized dealer, service station, or governmental agency for advice on how and where used oil can be safely discarded in your area. Synthetic Engine Oils Synthetic engine oils can be used if the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed.
386 MAINTAINING YOUR VEHICLE Drive Belts — Check Condition and Tension Belt tension is controlled by means of an automatic tensioner. No belt tension adjustments are required. However, belt and belt tensioner condition should be inspected at the specified intervals, and replaced if required. See your authorized dealer for service At the mileage indicated in the Maintenance Schedule, the condition of all the belts and tensioner should be checked. Refer to Section 8 of this manual.
MAINTAINING YOUR VEHICLE 387 CAUTION! WARNING! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involving engine misfire or other apparent loss of performance, have your vehicle serviced promptly. Continued operation of your vehicle with a severe malfunction could cause the converter to overheat, resulting in possible damage to the converter and vehicle.
388 MAINTAINING YOUR VEHICLE To minimize the possibility of catalytic converter damage: • Do not shut off the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing. • Do not idle the engine for prolonged periods during very rough idle or malfunctioning operating conditions.
MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Refer to the Maintenance Schedule in Section 8 for recommended engine air cleaner filter change intervals. WARNING! The air cleaner can provide protection in the case of engine backfire. Do not remove the air cleaner unless it is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air cleaner removed. Failure to do so can result in serious personal injury.
390 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system.
MAINTAINING YOUR VEHICLE NOTE: Use only manufacturer approved A/C System Sealers, Stop Leak Products, Seal Conditioners, Compressor Oil, and Refrigerants. Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency (EPA) and is an ozone-saving product.
392 MAINTAINING YOUR VEHICLE Driveline And Steering Component Lubrication All driveline and steering components are sealed and do not require lubrication. Driveshafts are not serviceable. Body Lubrication Locks and all body pivot points, including such items as seat tracks, doors, tailgate and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against rust and wear.
MAINTAINING YOUR VEHICLE Windshield And Rear Window Washers The fluid reservoir for the windshield washers and the rear window washer (if equipped) is shared. The fluid reservoir is located in the engine compartment. Be sure to check the fluid level at regular intervals. Fill the reservoir with windshield washer solvent only (not radiator antifreeze).
394 MAINTAINING YOUR VEHICLE into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as required. Cooling System WARNING! You or others can be badly burned by hot antifreeze/ coolant or steam from your radiator. If you see or hear steam coming from under the hood, don’t open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator or coolant bottle is hot.
MAINTAINING YOUR VEHICLE Cooling System — Drain, Flush, And Refill The cooling system should be drained, flushed, and refilled, at the intervals shown on the Maintenance Schedule. Refer to Section 8 of this manual. If the solution is dirty and contains a considerable amount of sediment, clean and flush with reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of old antifreeze/coolant solution.
396 MAINTAINING YOUR VEHICLE Adding Engine Coolant Your vehicle has been built with an improved antifreeze/ coolant that allows extended maintenance intervals. This antifreeze/coolant can be used up to 5 Years or 100,000 mi (160 000 km) before replacement. To prevent reducing this extended maintenance period, it is important that you use the same antifreeze/coolant throughout the life of your vehicle.
MAINTAINING YOUR VEHICLE The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. WARNING! The warning words DO NOT OPEN HOT on the cooling system pressure cap are a safety precaution. Never add antifreeze/coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
398 MAINTAINING YOUR VEHICLE When additional antifreeze/coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points To Remember NOTE: When the vehicle is stopped after a few miles of operation, you may observe vapor coming from the front of the engine compartment.
MAINTAINING YOUR VEHICLE 399 ONLY the correct type thermostat. Other designs may result in unsatisfactory cooling performance, poor gas mileage, and increased emissions. are present. Components should be replaced immediately if there is any evidence of degradation that could cause failure. Hoses and Vacuum/Vapor Harnesses Inspect surfaces of hoses and nylon tubing for evidence of heat and mechanical damage.
400 MAINTAINING YOUR VEHICLE Brake and Power Steering System Hoses When servicing the vehicle for scheduled maintenance, inspect surface of hoses for evidence of heat and mechanical damage. Hard and brittle rubber, cracking, tears, cuts, abrasion, and excessive swelling suggest deterioration of the rubber. Particular attention should be made to examining those hose surfaces nearest to high heat sources, such as the exhaust manifold. Worn brake hoses can burst and cause brake failure.
MAINTAINING YOUR VEHICLE Use only brake fluid that has been in a tightly closed container to avoid contamination from foreign matter or moisture. CAUTION! Do not allow petroleum base fluid to contaminate the brake fluid. Seal damage will result. Automatic Transmission Selection of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission performance. Use only manufacturer’s recommended transmission fluid.
402 MAINTAINING YOUR VEHICLE To properly check the automatic transmission fluid level, the following procedure must be used: 1. Operate the engine at idle speed and normal operating temperature. 2. The vehicle must be on level ground. 3. Fully apply parking brake. 4. Place the gear selector momentarily in each gear position ending with the lever in PARK. 5. Remove the dipstick, wipe it clean and reinsert it until seated. 6. Remove the dipstick again and note the fluid level on both sides.
MAINTAINING YOUR VEHICLE CAUTION! Be aware that if the fluid temperature is below 50° F (10° C), it may not register on the dipstick. Do not add fluid until the temperature is elevated enough to produce an accurate reading. 7. Check for leaks. Release the parking brake. NOTE: To prevent dirt and water from entering the transmission after checking or replenishing fluid, make certain that the dipstick cap is properly reseated.
404 MAINTAINING YOUR VEHICLE Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more than 3/16 in (4.76 mm) below the bottom of the hole. Transfer Case Fluid Level Check The fluid level should be to the bottom edge of the fill hole (A) when the vehicle is in a level position. Add fluid, if necessary, to maintain the proper level.
MAINTAINING YOUR VEHICLE Drain First remove fill plug (B), then drain plug (C). Recommended tightening torque for drain and fill plugs is 15 to 25 ft lbs (20 to 34 N·m). CAUTION! When replacing plugs, do not overtighten. You could damage them and cause them to leak. Selection of Lubricant Use only manufacturer’s recommended fluid. Refer to Fluids, Lubricants, and Genuine Parts in this section for the correct fluid type.
406 MAINTAINING YOUR VEHICLE Following off-road usage, completely inspect the underbody of your vehicle. Check tires, body structure, steering, suspension and exhaust system for damage. Check threaded fasteners for looseness, particularly on the chassis, drivetrain components, steering and suspension. Retighten, if required, to torque values specified in the Service Manual.
MAINTAINING YOUR VEHICLE hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and underbody protection. 407 • Bird droppings. Washing The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. • Wash your vehicle regularly. Always wash your vehicle in the shade using MOPAR威 Car Wash or a mild car wash soap, and rinse the panels completely with clear water.
408 MAINTAINING YOUR VEHICLE CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month.
MAINTAINING YOUR VEHICLE Wheel and Wheel Trim Care All wheels and wheel trim, especially aluminum and chrome plated wheels should be cleaned regularly with a mild soap and water to prevent corrosion. To remove heavy soil, use MOPAR威 Wheel Cleaner or select a nonabrasive, non-acidic cleaner. Do not use scouring pads, steel wool, a bristle brush or metal polishes. Only MOPAR威 cleaners are recommended. Do not use oven cleaner.
410 MAINTAINING YOUR VEHICLE WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. CAUTION! When installing hanging air fresheners in your vehicle, read the installation instructions carefully. Some air fresheners will damage the finish of painted or decorated parts if allowed to directly contact any surface.
MAINTAINING YOUR VEHICLE Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage will also weaken the fabric. If the belts need cleaning, use MOPAR威 Total Clean, a mild soap solution, or lukewarm water. Do not remove the belts from the vehicle to wash them. 411 • Avoid leaving your vehicle unattended with the top down, as exposure to sun or rain may damage interior trim.
412 MAINTAINING YOUR VEHICLE RINSING — Be sure to remove all trace of cleaner by rinsing the top thoroughly with clean water. Remember to allow the top to dry before lowering it. 2. When washing, never use hot water or anything stronger than a mild soap. Never use solvents such as alcohol or harsh cleaning agents. Care Of Fabric Top Windows 3. Always rinse thoroughly with cold water, then wipe with a soft and slightly moist, clean cloth.
MAINTAINING YOUR VEHICLE 413 zipper halves with fresh water and allow to dry. Aggressively work the MOPAR威 Soft Top Zipper Cleaner and Lubricant into the zipper teeth. If a stuck zipper slide is experienced, work the MOPAR威 Soft Top Zipper Cleaner and Lubricant into the zipper slide. Several applications may be required before the zipper comes free. 6. Never paste stickers, gummed labels or any tape to the windows. Adhesives are hard to remove and may damage the windows.
414 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse J4 25 Amp Natural J5 25 Amp Natural J6 40 Amp Green J7 30 Amp Pink J8 — J9 40 Amp Green J10 30 Amp Pink J11 30 Amp Pink Mini Fuse Description Driver Door Node Passenger Door Node Anti-Lock Brake System (ABS) Pump Feed/ESP Anti-Lock Brake System (ABS) Valve Feed/ESP — PZEV Sec Motor Feed/ Flex Fuel Headlamp Wash Relay/ Manifold Tuning Valve Sway Bar Cavity Cartridge Fuse J13 60 Amp Yellow J14 40 Amp Green J15 30 Amp Pink J17 40 Amp Green J18 20 Amp Yell
MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Fuse Fuse J21 20 Amp Yellow J22 — M1 15 Amp Blue M2 M3 M4 M5 M6 M7 20 Amp Yellow 20 Amp Yellow — — 20 Amp Yellow 20 Amp Yellow Description Front/Rear Washer Spare Center High-Mounted Stop Light (CHMSL)/ Switch Stop Lamp Feed Relay Trailer Lighting (Stop) Frt/Rear Axle Locker Relay — — Power Outlet #1/Rain Sensor Power Outlet #2 (BATT/ACC SELECT) Cavity Cartridge Mini Fuse Fuse M8 20 Amp Yellow M9 20 Amp Yellow M10 20 Amp Yellow 415 Description Front Heate
416 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Description Fuse Fuse M11 10 Amp (Ignition Off Draw) Red IOD-HVAC/ATC, MW SENSR, Underhood Lamp (UH LMP) M12 30 Amp Amplifier (AMP) Green M13 20 Amp Ignition Off Draw— Yellow Cabin Compartment Node (IOD-CCN), Wireless Control Module (WCM), SIREN, Multifunction Control Switch (MULTIFCTN SW) M14 20 Amp Trailer Tow (Export Yellow Only) Cavity Cartridge Mini Description Fuse Fuse M15 20 Amp COL MOD, IR SNS, Yellow Heater Ventilation, Air Conditioning/ Automa
MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Fuse Fuse M16 10 Amp Red M17 15 Amp Blue M18 15 Amp Blue M19 25 Amp Natural 15 Amp Blue M20 M21 20 Amp Yellow Description Occupant Restraint Controller (ORC) Left Tail/License/Park Lamp (LT-TAIL/LIC/ PRK LMP) Right Tail/Park/Run Lamp (RT-TAIL/PRK/ RUN LMP) Auto Shut Down (ASD #1 and #2) Cabin Compartment Node Interior Light (CCN INT LIGHT), Switch Bank (SW BANK) Auto Shut Down (ASD #3) Cavity Cartridge Mini Fuse Fuse M22 10 Amp Red M23 10 Amp Red M24 2
418 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Fuse Fuse M30 15 Amp Blue M31 20 Amp Yellow M32 10 Amp Red M33 M34 Description Wiper Motor Frt, J1962 Diagnostic Feed Backup Lamps (B/U LAMPS) Occupant Restraint Controller (ORC), TT EUROPE 10 Amp Next Generation ConRed troller (NGC), Global Powertrain Engine Controller (GPEC) 10 Amp Park Assist (PRK ASST), Heater Ventilation, Air Red Conditioning Module (HVAC MOD), Headlamp Wash (HDLP WASH), Compass (COMPAS) Cavity Cartridge Mini Fuse Fuse M35 10 Amp
MAINTAINING YOUR VEHICLE CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
420 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS — IF EQUIPPED Interior Lights Bulb Type Auto. Trans. Indicator Light . . . . . . . . . . . . . . . . . 658 Courtesy Lights, Under Dash (1). . . . . . . . . . . . . . 906 Heater Control Lights (2) . . . . . . . . . . . . . . . . . . . 194 Rocker Switch Indicator Light (Rear Window Defogger, and Rear Wash/Wipe). . . . . . . . . . . . . . . ** Soundbar Dome Light . . . . . . . . . . . . . . . . . . . . . 912 ** Bulbs only available from authorized dealer.
MAINTAINING YOUR VEHICLE 4. Turn both park and turn signal socket assemblies 1/4 turn counterclockwise and remove. 5. Remove the four screws holding the metal retaining ring. 6. Remove the lamp from the collar. 421 CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 7. Grasp the bulb and turn 1/4 turn counterclockwise. 8. Pull the bulb from the housing. 9.
422 MAINTAINING YOUR VEHICLE 3. Turn the socket assembly 1/4 turn counterclockwise and remove from housing. Pull the bulb straight from the socket to replace. Front Side Marker 1. Reach under the front fender flare and locate the front side marker socket. 2. Turn the socket assembly counterclockwise 1/3 turn and remove it from the housing. Pull the bulb straight from the socket to replace. Front Fog Light 1.
MAINTAINING YOUR VEHICLE 423 4. Pull the bulb straight from the socket to replace. Center High-Mounted Stop Light (CHMSL) The stop lamp is mounted on a bracket that extends upward from the tailgate behind the spare tire. If service is needed, obtain the LED/Cover Assembly from your local authorized dealer. 1. Remove the spare tire. 2. Remove the four screws holding the lens/cover in place on the spare tire carrier. 2.
424 MAINTAINING YOUR VEHICLE FLUID CAPACITIES Fuel (Approximate) — 2–Door Models Fuel (Approximate) — 4–Door Models Engine Oil with Filter 3.8 Liter Engine (SAE 5W-20, API Certified Engine Oil) Cooling System * 3.8 Liter Engine (MOPAR威 Antifreeze/Engine Coolant 5 Year/ 100,000 Mile Formula) * Includes heater and coolant recovery bottle filled to MAX level. U.S. 18.5 Gallons 22.5 Gallons Metric 70 Liters 85 Liters 6 Quarts 5.
MAINTAINING YOUR VEHICLE 425 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Spark Plugs (3.8L Engine) Oil Filter (3.8L Engine) Fuel Selection Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of DaimlerChrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade. RE14PLP5 (Gap 0.050 in [1.
426 MAINTAINING YOUR VEHICLE Chassis Component Automatic Transmission Manual Transmission Transfer Case Axle Differential (Front) Axle Differential (Rear) Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4 Automatic Transmission Fluid MOPAR威 Manual Transmission Lubricant or equivalent (meeting the requirements of DaimlerChrysler Material Standard MS-9224) MOPAR威 ATF+4 Automatic Transmission Fluid or equivalent.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance . . . . . . . 428 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . . 428 ▫ Required Maintenance Intervals . . . . . . . . . . .
M A I N T E N A N C E 428 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES 429 M A • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. • Check the windshield washer solvent and add if I N required. T • Under no circumstances should oil change intervals exceed 6,000 mi (10,000 km) or 6 months, whichever comes first. Once a Month Your dealer will reset the oil change indicator message after completing the scheduled oil change.
M A I N T E N A N C E S C H E D U L E S 8 430 MAINTENANCE SCHEDULES At Each Oil Change • Change the engine oil filter. • Inspect the brake hoses and lines. • Check the manual transmission fluid level. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle.
MAINTENANCE SCHEDULES 431 M Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Change the engine oil and engine oil filter. Rotate tires. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter, replace if necessary. Inspect the brake linings, replace if necessary. Replace the air conditioning filter.
M 432 MAINTENANCE SCHEDULES A I N T E N Maintenance Items A N Inspect the front suspension, tie rod ends and boot C seals, replace if necessary. E Replace the engine air cleaner filter.
MAINTENANCE SCHEDULES 433 M Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Change the transfer case fluid if using your vehicle for any of the following: police, taxi, fleet, off-road or frequent trailer towing. Inspect and replace PCV valve if necessary. Flush and replace the engine coolant. Replace the ignition cables. Replace the spark plugs. Change the automatic transmission fluid, and filter(s). Replace accessory drive belt(s).
M 434 MAINTENANCE SCHEDULES A I N WARNING! T E You can be badly injured working on or around a N motor vehicle. Do only that service work for which A N you have the knowledge and the right equipment. If C you have any doubt about your ability to perform a E S C H E D U L E S 8 service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437 ▫ In Mexico Contact . . . . . . . . . . . . . . . . . . . . . 438 ▫ Prepare For The Appointment . . . . . . . . . . . . 437 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . . 439 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 437 ▫ Service Contract . . . . . . . . . . . . . . . . . . . .
436 IF YOU NEED CONSUMER ASSISTANCE 䡵 Publication Order Forms . . . . . . . . . . . . . . . . . . 441 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . 443 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 442 ▫ Temperature Grades . . . . . . . . . . . . . . . . . . . 444 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. Keep a maintenance log of your vehicle’s service history. This can often provide a clue to the current problem.
438 IF YOU NEED CONSUMER ASSISTANCE special tools, and the latest information to ensure your vehicle is fixed correctly and in a timely manner. This is why you should always talk to your authorized dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealership. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its Customer Center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
440 IF YOU NEED CONSUMER ASSISTANCE WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain, or emit, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. WARRANTY INFORMATION (U.S.
IF YOU NEED CONSUMER ASSISTANCE To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), or go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from http:// www.safercar.gov. In Canada If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
442 IF YOU NEED CONSUMER ASSISTANCE • Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations. These practical manuals make it easy for students and technicians to find and fix problems on computer-controlled vehicle systems and features. They show exactly how to find and correct problems the first time, using step-bystep troubleshooting and drivability procedures, proven diagnostic tests and a complete list of all tools and equipment.
IF YOU NEED CONSUMER ASSISTANCE All passenger car tires must conform to Federal safety requirements in addition to these grades. Treadwear The treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear 1-1/2 times as well on the government course as a tire graded 100.
444 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
446 INDEX ABS (Anti-Lock Brake System) . . . . . . . . . . . . 208,309 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 198 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 389 Air Conditioner Maintenance . . . . . . . . . . . . . . . 390 Air Conditioning . . . . . . . . . . . . . . . . . . . . . 261,264 Air Conditioning Controls . . . . . . . . . . . . . . . . . 264 Air Conditioning, Operating Tips . . . . . . . . . .
INDEX 447 Axle Lock . . . . . . . . . . . . . . . . . . . . . . . . . . 290,291 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . 420 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389 Emergency Starting . . . . . . . . . . . . . . . . . . . . . 371 Keyless Transmitter Replacement (RKE) . . . . . . . 24 Belts, Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 Belts, Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
448 INDEX Charging System Light . . . . . . . . . . . . . . . . . . . . 206 Chart, Tire Sizing . . . . . . . . . . . . . . . . . . . . . . . . 314 Check Engine Light (Malfunction Indicator Light) . . . . . . . . . . . . . 213,380 Child Restraint . . . . . . . . . . . . . . . . . . . . 62,63,69,72 Child Restraint Tether Anchors . . . . . . . . . . . . . 68,69 Child Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Climate Control . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Defroster, Windshield . . . . . . . . . . . . . . . . . . 260,262 Delay (Intermittent) Wipers . . . . . . . . . . . . . . . . . 100 Diagnostic System, Onboard . . . . . . . . . . . . . . . . 379 Digital Video Disc (DVD) Player . . . . . . . . . . . . . 250 Dimmer Switch, Headlight . . . . . . . . . . . . . . . . . . 98 Dipsticks Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . . . 383 Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . 374 Disarming, Theft System . . . . . . . .
450 INDEX Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . 371 Tow Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . 374 Emission Control System Maintenance . . . . . . 380,428 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . 389 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . . 275 Break-In Recommendations . . .
INDEX Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 Finish Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407 Flashers Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . 364 Turn Signal . . . . . . . . . . . . . . . . . . . . . 207,421,422 Flooded Engine Starting . . . . . . . . . . . . . . . . . . . 273 Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . . 424 Fluid Level Checks . . . . . . . . . . . . . . . . . . . . . .
452 INDEX Gasoline/Oxygenate Blends . . . . . . . . . . . . . . . . 337 Gauges Coolant Temperature . . . . . . . . . . . . . . . . . . . . 209 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . 206 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . 276,281 General Information . .
INDEX Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ignition Key Removal . . . . . . . . . . . . . . . . . . . . . 12 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . . 19 Immobilizer (Sentry Key) . . . . . . . . . . . . . . . . . . . 14 Infant Restraint . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Inflation Pressure Tires . . . . . . . . . . . . . . . . . . . . 322 Inside Rearview Mirror . . . . . . . . . . . . . . . . . . . . 83 Instrument Cluster . . .
454 INDEX Back-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 Brake Assist Warning . . . . . . . . . . . . . . . . . 115,214 Brake Warning . . . . . . . . . . . . . . . . . . . . . . . . 207 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . 420 Cargo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Center Mounted Stop . . . . . . . . . . . . . . . . . . . 423 Check Engine (Malfunction Indicator) . . . . . . . . 213 Cruise . . . . . . . . . . . . . . . . . . . .
INDEX Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317 Locking Axle . . . . . . . . . . . . . . . . . . . . . . . . 290,291 Locks Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31,32 Power Door . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Steering Wheel . . . . . . . . . . . . . . . . . . . . . . . . . 14 Lower Anchors and Tether for CHildren (LATCH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68,69 Lubrication, Body . . . . . . . . . . . . .
456 INDEX Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210,211 Off-Pavement Driving (Off-Road) . . . . . . . . . . . . 294 Off-Road Driving (Off-Pavement) . . . . . . . . . . . . 294 Oil Change Indicator . . . . . . . . . . . . . . . . . . . . . 212 Oil Change Indicator, Reset . . . . . . . . . . . . . . . . . 212 Oil, Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383 Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 Dipstick . . . . . . . . . . . . .
INDEX Pregnant Women and Seat Belts . . . . . . . . . . . . . . 50 Preparation for Jacking . . . . . . . . . . . . . . . . . . . . 367 Pretensioners Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Programming Transmitters (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . 22 Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 325 Radio Broadcast Signals . . . . . . . . . . . . . . . . . . . 220 Radio, Navigation . . . . . . . . . . . . . . . . . . . . . .
458 INDEX Restraints, Child . . . . . . . . . . . . . . . . . . . . . . . 62,67 Restraints, Occupant . . . . . . . . . . . . . . . . . . . . . . 40 Roll Over Warning . . . . . . . . . . . . . . . . . . . . . . . . 5 Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 329 Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 76 Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 77 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 440 Safety Information, Tire .
INDEX Sentry Key Programming . . . . . . . . . . . . . . . . . . . 16 Sentry Key Replacement . . . . . . . . . . . . . . . . . . . 16 Service Assistance . . . . . . . . . . . . . . . . . . . . . . . 437 Service Contract . . . . . . . . . . . . . . . . . . . . . . . . . 439 Service Manuals . . . . . . . . . . . . . . . . . . . . . . . . 441 Setting the Clock . . . . . . . . . . . . . . . . . . 224,236,251 Shift Lock Manual Override . . . . . . . . . . . . . . . . 280 Shifting . . . . . . . . . . . . . . . .
460 INDEX Storage, Vehicle . . . . . . . . . . . . . . . . . . . . . . 266,419 Storing Your Vehicle . . . . . . . . . . . . . . . . . . . . . . 419 Sunrider . . . . . . . . . . . . . . . . . . . . . . . . . . . 161,164 Supplemental Restraint System - Airbag . . . . . . . . 51 Sway Bar Disconnect, Electronic . . . . . . . . . . . . . 292 Swing Gate, Rear . . . . . . . . . . . . . . . . . . . . . . . . . 38 System, Navigation . . . . . . . . . . . . . . . . . . . . . . 250 System, Remote Starting . . . . .
INDEX Spare Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . 367 Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Tread Wear Indicators . . . . . . . . . . . . . . . . . . . 326 To Open Hood . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Tongue Weight/Trailer Weight . . . . . . . . . . . . . . 352 Torque Converter Clutch . . . . . . . . . . . . . . . . . . 285 Tow Hooks, Emergency . . . . . . . . . . . . . . . . . . . 374 Towing . . . . . . . . . . . . . . . . . . . .
462 INDEX Trip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . 215 Trip Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Trip Odometer Reset Button . . . . . . . . . . . . . . . . 210 Turn Signals . . . . . . . . . . . . . . . . . . . . 99,207,421,422 UConnect™ (Hands-Free Phone) Uniform Tire Quality Grades . . . Universal Serial Bus (USB) Port . Upholstery Care . . . . . . . . . . . USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 463 Windshield Washers . . . . . . . . . . . . . . . . . . . 100,393 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393 Windshield Wiper Blades . . . . . . . . . . . . . . . . . . 392 Windshield Wipers . . . . . . . . . . . . . . . . . . . . . . . 100 Wiper, Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 YES Essentials威 Fabric Cleaning Procedure . . . . . .
INTRODUCTION INTRODUCTION ROLLOVER WARNING HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/ALTERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key RemovalKey-In-Ignition ReminderSTEERING WHEEL LOCK To Manually Lock the Steering WheelTo Release the Steering Wheel LockSENTRY KEY Replacement KeysCustomer Key ProgrammingGeneral InformationSECURITY ALARM SYSTEM - IF EQUIPPED To Set the AlarmTo Disarm the SystemILLUMINATED ENTRY
2008 Wrangler 2008 OWNER’ S MANUAL 81-326-0855 Second Edition Printed in U.S.A.
