Instruction Manual

•

Most of the time, when in Automatic operation, you

can temporarily put the system into Recirculation

mode by pressing the “Recirculation” button. How-

ever, under certain conditions in automatic the system

is blowing air out of the defrost vents. When these

conditions are present, and the “Recirculation” button

is pressed, the indicator will flash and remain off. This

tells you that you are unable to go into Recirculation

mode at this time. If you would like to go to Recircu-

lation mode, you must first move your mode knob to

Panel, Panel/Floor, or Floor, then press the “Recircu-

lation” button. This feature will reduce the possibility

of window fogging.

Manual Operation

This system offers a full complement of manual override

features which consist of Blower Preferred Automatic,

Mode Preferred Automatic with Manual Air Temperature

Control, and Manual. This means the customer can

override the blower, mode, and disable Automatic Tem-

perature Control completely.

NOTE: Please read the Automatic Temperature Control

Operation Chart below for details.

UNDERSTANDING YOUR INSTRUMENT PANEL 277