User Guide Owner's manual

SPEED CONTROL

• The speed control switches are located

on the steering wheel.

Cruise ON/OFF

• Push the ON/OFF button to activate the

Speed Control.

• CRUISE

will appear on the

instrument cluster to indicate the Speed

Control is on.

• Push the ON/OFF button a second time

to turn the system off.

Set

• With the Speed Control on, push and release the SET – button to set a desired

speed.

Accel/Decel

• Once a speed is set, pushing the RES + button once or the SET – button once will

increase or decrease the set speed approximately 1 mph (2 km/h).

• Push and hold the RES + button to accelerate in 5mph (8 km/h) increments or push

and hold the SET – button to decelerate in 5mph (8 km/h) increments; release the

button to save the new set speed.

Resume

• To resume a previously selected set speed in memory, push the RES + button and

release.

Cancel

• Push the CANCEL button, or apply the brakes to cancel the set speed and maintain

the set speed memory.

• Push the ON/OFF button to turn the system off and erase the set speed memory.

WARNING!

• Leaving the Electronic Speed Control system on when not in use is dangerous.

You could accidentally set the system or cause it to go faster than you want.

You could lose control and have a collision. Always leave the Electronic Speed

Control system off when you are not using it.

(Continued)

OPERATING YOUR VEHICLE