2015 OWNER’S MANUAL Compass
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated nondrinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS ! INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . .4 ! WARNINGS AND CAUTIONS . . . . . . . . . . . . . .7 ! ROLLOVER WARNING . . . . . . . . . . . . . . . . . . .4 ! VEHICLE IDENTIFICATION NUMBER . . . . . . . .7 ! HOW TO USE THIS MANUAL . . . . . . . . . . . . . .5 ! VEHICLE MODIFICATIONS/ALTERATIONS . . . .
4 INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained techniLLC vehicle. Be assured that it represents precision cians and genuine parts, and cares about your satisfaction. workmanship, distinctive styling, and high quality - all ROLLOVER WARNING essentials that are traditional to our vehicles.
INTRODUCTION 5 injuries by two million annually. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Always buckle up. HOW TO USE THIS MANUAL Consult the Table of Contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle’s equipment.
6 INTRODUCTION
INTRODUCTION 7 WARNINGS AND CAUTIONS 1 This Owners Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information. Observe all Warnings and Cautions.
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right Front Body VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS ! A WORD ABOUT YOUR KEYS . . . . . . . . . . . . .12 ▫ Rearming The System . . . . . . . . . . . . . . . . . . .19 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . .12 ▫ To Disarm The System . . . . . . . . . . . . . . . . . . .19 ▫ Locking Doors With A Key. . . . . . . . . . . . . . . .14 ▫ Vehicle Security Alarm Manual Override . . . . . .20 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Sound Horn With Remote Key Lock . . . . . . . . .22 ! POWER WINDOWS — IF EQUIPPED . . . . . . . .35 ▫ Flash Lights With Remote Key Lock/Unlock . . .23 ▫ Power Window Switches . . . . . . . . . . . . . . . . .35 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . .24 ▫ Auto-Down . . . . . . . . . . . . . . . . . . . . . . . . . .37 ▫ Programming Additional Transmitters. . . . . . . .25 ▫ Window Lockout Switch . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ! SAFETY TIPS . . . . . . . . . . . . . . . . . . . . . . . . . .98 ▫ Transporting Passengers. . . . . . . . . . . . . . . . . .98 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . . .99 ▫ Safety Checks You Should Make Inside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 ▫ Periodic Safety Checks You Should Make Outside The Vehicle . . . . . . . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key Removal The authorized dealer that sold you your new vehicle has 1. Place the shift lever in PARK (if equipped with an the key code numbers for your vehicle locks. These automatic transmission). numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a 2. Place the ignition in the ACC (Accessory) position. safe place. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: If you try to remove the key before you place the shift lever in PARK, the key may become trapped temporarily in the ignition switch cylinder. If this occurs, place the shift lever in PARK, rotate the key clockwise slightly, then remove the key as described above. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safety feature is inoperable.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the transmission gear selector. • Do not leave the Key Fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 SENTRY KEY® The Sentry Key® Immobilizer System prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses ignition keys that have an embedded electronic chip (transponder) to prevent unauthorized vehicle operation.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! CAUTION! The Sentry Key® Immobilizer system is not compatible with some aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. Always remove the Sentry Keys® from the vehicle and lock all doors when leaving the vehicle unattended.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 4. Insert a blank Sentry Key® into the ignition switch. Turn the ignition switch to the ON/RUN position If you have two valid Sentry Keys®, you can program within 60 seconds. After 10 seconds, a single chime new Sentry Keys® to the system by performing the will sound. In addition, the Vehicle Security Light will following procedure: stop flashing. To indicate that programming is com1.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE starting your vehicle. The remaining keys must then be VEHICLE SECURITY ALARM — IF EQUIPPED reprogrammed. All vehicle keys must be taken to an This Vehicle Security Alarm monitors the doors, liftgate, authorized dealer at the time of service to be repro- and ignition switch for unauthorized operation. grammed. When the alarm is activated, the interior switches for General Information door locks are disabled.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 3. The Vehicle Security Light in the instrument cluster will flash rapidly for approximately 16 seconds. This shows that the Vehicle Security Alarm is arming. During this period, if a door is opened, the ignition switch is turned to ON/RUN, or the power door locks are unlocked in any manner, the Vehicle Security Alarm will automatically disarm. After approximately 16 seconds, the Vehicle Security Light will flash slowly.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Vehicle Security Alarm Manual Override The Vehicle Security Alarm will not arm if you lock the doors using the manual door lock plunger. REMOTE KEYLESS ENTRY (RKE) — IF EQUIPPED This system allows you to lock or unlock the doors and liftgate or activate the Panic Alarm from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmitter. The RKE transmitter does not need to be pointed at the vehicle to activate the system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 To Unlock The Doors And Liftgate • For vehicles not equipped with the EVIC, perform the following steps: Push and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door, or twice 1. Push and hold the LOCK button on a programmed within five seconds to unlock all doors and liftgate. The RKE transmitter for at least 4 seconds, but no longer turn signal lights will flash to acknowledge the unlock than 10 seconds.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Pushing the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Push the UNLOCK button to deactivate the Vehicle Security Alarm. Illuminated Approach — If Equipped This feature activates the headlights for up to 90 seconds when the doors are unlocked with the RKE transmitter.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, perform the NOTE: Pushing the LOCK button on the RKE transmitter following steps: while you are in the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security 1. Push the LOCK button on a programmed RKE transAlarm activated will cause the alarm to sound. Push the mitter for at least 4 seconds, but no longer than UNLOCK button to deactivate the Vehicle Security 10 seconds.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the Alarm activated will cause the alarm to sound. Push the following steps: UNLOCK button to deactivate the Vehicle Security Alarm. 1. Push and hold the UNLOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer Using The Panic Alarm than 10 seconds. Then, push and hold the LOCK To turn the Panic Alarm feature ON or OFF, push and button while still holding the UNLOCK button.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Programming Additional Transmitters Refer to Sentry Key® “Customer Key Programming”. If you do not have a programmed RKE transmitter, contact your authorized dealer for details. 2 Transmitter Battery Replacement NOTE: Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate The recommended replacement battery is CR2032. 1. If the RKE transmitter is equipped with a screw, remove the screw.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the RKE transmitter is equipped with a screw, If your RKE transmitter fails to operate from a normal distance, check for these two conditions: reinstall and tighten the screw until snug. 1. A weak battery in the transmitter. The expected life of the battery is a minimum of three years. This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 NOTE: • Battery at an acceptable charge level • The vehicle must be equipped with an automatic • RKE PANIC button not pushed transmission to be equipped with Remote Start. • System not disabled from previous remote start event • Obstructions between the vehicle and the Key Fob may • Vehicle theft alarm not active reduce this range.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) — If Equipped The following messages will display in the EVIC if the vehicle fails to remote start or exits remote start prematurely: • Remote Start Aborted — Door Ajar • Remote Start Aborted — Hood Ajar • Remote Start Aborted — L/Gate Ajar • Remote Start Aborted — Fuel Low To Enter Remote Start Push and release the REMOTE START button on the RKE transmitter twice within five seconds
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter. However, the ignition switch must be cycled to the ON/RUN position before you can repeat the start sequence for a third cycle. To Exit Remote Start Mode Without Driving The Vehicle Push and release the REMOTE START button one time or allow the engine to run for the entire 15-minute cycle.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS Manual Door Locks Use the manual door lock knob to lock the doors from inside the vehicle. If the lock knob is down when the door is closed, the door will lock. Make sure the keys are not inside the vehicle before closing the door. Manual Door Lock Knob WARNING! • For personal security and safety in the event of an collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. Power Door Locks A power door lock switch is located on the driver’s and front passenger’s door panel. Push this switch to lock or unlock the doors and liftgate.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Within 15 seconds, cycle the ignition switch between LOCK and ON/RUN and then back to LOCK four The auto door lock feature default condition is enabled. times ending up in the LOCK position (do not start the When enabled, the door locks will lock automatically engine). when the vehicle’s speed exceeds 15 mph (24 km/h). 3. Within 30 seconds, push the power door LOCK switch Auto Lock Doors Programming to lock the doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Automatic Unlock Doors On Exit The doors will unlock automatically if: Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. • The Automatic Unlock Doors On Exit feature is en• For vehicles not equipped with the EVIC, perform the abled. following procedure: • The transmission was in gear and the vehicle speed 1. Close all doors and place the key in the ignition. returned to 0 mph (0 km/h). 2.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Insert the tip of the ignition key into the lock and rotate to the LOCK or UNLOCK position. • If you do not hear the chime it means that the system did not enter the programming mode and you will 3. Repeat steps 1 and 2 for the opposite rear door. need to repeat the procedure. NOTE: • Use the Automatic Unlock Doors On Exit feature in accordance with local laws.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 NOTE: For emergency exit with the system engaged, move the lock knob up (unlocked position), roll down the window and open the door with the outside door handle. POWER WINDOWS — IF EQUIPPED Power Window Switches Child-Protection Door Lock Function WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. • For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors. To disable the window controls on the other doors, push the window LOCKOUT switch. To enable the window controls, push the window LOCKOUT switch a second time. Power Window Switch Location Auto-Down The driver’s door window switch has an Auto-Down feature.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE NOTE: The key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate. To unlock the liftgate, insert the key into the lock and turn it to the right (manual lock models only). The liftgate can also be unlocked using the Remote Keyless Entry (RKE) transmitter or by activating the power door lock switches located on the front doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 • Although the liftgate has no inside release mechanism, the liftgate trim panel includes an opening with a snap-in cap that provides access to release the latch in the event of an electrical system malfunction. WARNING! • Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Important Safety Precautions Please pay close attention to the information in this section. It tells you how to use your restraint system properly, to keep you and your passengers as safe as possible. restraints or belt-positioning booster seats. Older children who do not use child restraints or beltpositioning booster seats should ride properly buckled up in a vehicle with a rear seat. Here are some simple steps you can take to minimize the 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 8. Do not lean against the door or window. If your vehicle has side air bags, and deployment occurs, the side air bags will inflate forcefully into the space between you and the door and you could be injured. Seat Belt Systems Buckle up even though you are an excellent driver, even on short trips. Someone on the road may be a poor driver and could cause a collision that includes you. This can 9.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE are buckled. The driver should instruct all other occupants to buckle their seat belts. If an outboard front seat belt is unbuckled while traveling at speeds greater than BeltAlert is a feature intended to remind the driver 5 mph (8 km/h), BeltAlert will provide both audio and and outboard front passenger (if equipped with outvisual notification. board front passenger BeltAlert) to buckle their seat belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 NOTE: If BeltAlert has been deactivated, the Seat Belt Reminder Light will continue to illuminate while the driver’s or outboard front passenger’s (if equipped with BeltAlert) seat belt remains unbuckled. Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts. The seat belt webbing retractor will lock only during very sudden stops or collisions.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly. • Wearing your seat belt incorrectly could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of the seat belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! (Continued) WARNING! (Continued) • A seat belt that is too loose will not protect you properly. In a sudden stop, you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly. • A seat belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A seat belt worn under the arm can cause internal injuries.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Pulling Out The Latch Plate Inserting Latch Plate Into Buckle 3. When the seat belt is long enough to fit, insert the latch 4. Position the lap belt so that it is snug and lies low plate into the buckle until you hear a “click.” across your hips, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 6. To release the seat belt, push the red button on the buckle. The seat belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the seat belt to retract fully. Second Row Center Seat Belt Operating Instructions The second row center seat belt features a seat belt with a mini-latch and buckle, which allows the seat belt to detach from the lower anchor when the seat is folded.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Remove the mini-latch and regular latch from its stowed position in the right rear side trim panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 2 Connecting Mini-Latch To Buckle Rear Center Seat Belt Buckled
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. When the belt is long enough to fit, insert the minilatch plate into the mini-buckle until you hear a “click.” 5. Sit back in seat. Slide the regular latch plate up the webbing as far as necessary to allow the seat belt to go around your lap. 6. When the seat belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 7. Position the lap belt so that it is snug and lies low across your hips, below your abdomen.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 9. To release the belt, push the red button on the buckle. 10. To disengage the mini-latch from the mini-buckle for storage, insert the regular latch plate into the center red slot on the mini-buckle. The seat belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. Insert the mini-latch plate and regular latch plate into its stowed position.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing and the seat belt is no longer twisted. Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seats, the top of the shoulder belt can be adjusted upward or downward to position the seat belt away from your neck.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward position without pushing or squeezing the release button. To verify the shoulder belt anchorage is latched, pull downward on the shoulder belt anchorage until it is locked into position.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: These devices are not a substitute for proper seat We recommend that pregnant women use the seat belts belt placement by the occupant. The seat belt still must be throughout their pregnancy. Keeping the mother safe is worn snugly and positioned properly. The pretensioners are triggered by the Occupant Rethe best way to keep the baby safe. straint Controller (ORC).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 For additional information, refer to “Installing Child If the passenger seating position is equipped with an Restraints Using The Vehicle Seat Belt” under the “Child ALR and is being used for normal usage: Restraints” section of this manual. The table below Only pull the seat belt webbing out far enough to defines the type of feature for each seating position. comfortably wrap around the occupant’s mid-section so as to not activate the ALR.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE installed in a seating position that has a seat belt with this 3. Allow the seat belt to retract. As the seat belt retracts, you will hear a clicking sound. This indicates the seat feature. Children 12 years old and under should always belt is now in the Automatic Locking Mode. be properly restrained in a vehicle with a rear seat. WARNING! • Never place a rear-facing child restraint in front of an air bag.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 WARNING! (Continued) • Failure to replace the seat belt assembly could increase the risk of injury in collisions. • Do not use the Automatic Locking Mode to restrain occupants who are wearing the seat belt or children who are using booster seats. The locked mode is only used to install rear-facing or forward-facing child restraints that have a harness for restraining the child.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision. NOTE: For more information on properly adjusting and positioning the head restraint, refer to “Adjusting Active Head Restraints” in “Understanding The Features Of Your Vehicle”.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 1. Grasp the deployed AHR from the rear seat. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 2 Hand Positioning Points On AHR 2. Position the hands on the top of the deployed AHR at a comfortable position.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE AHR In Reset Position Review Table Below A — Downward Movement B — Rearward Movement C — Final Downward Movement To Engage Locking Mechanism NOTE: • If you have difficulties or problems resetting the Active Head Restraints, see an authorized dealer. 4. The AHR front soft foam and trim half should lock • For safety reasons, have the Active Head Restraints into the back decorative plastic half. checked by a qualified specialist at an authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Supplemental Restraint System (SRS) Air Bag System Components • Front and Side Impact Sensors • Seat Belt Pretenioners Your vehicle may be equipped with the following air bag • Seat Belt Buckle Switch system components: • Seat Track Position Sensors • Occupant Restraint Controller (ORC) Advanced Front Air Bags • Air Bag Warning Light This vehicle has Advanced Front Air Bags for both the • Steering Wheel and Column driver and front passenger as a supplement t
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Advanced Front Air Bag And Knee Impact Bolster Locations 1 — Driver And Passenger Advanced Front Air Bags 2 — Driver And Passenger Knee Impact Bolsters/Supplemental Driver And Passenger Knee Air Bag • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 the driver or front passenger seat belt is buckled. The seat The Advanced Front Air Bag system has multistage belt buckle switch may adjust the inflation rate of the driver and front passenger air bags. This system provides Advanced Front Air Bags.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly. In some collisions, air bags won’t deploy at all. Always wear your seat belts even though you have air bags. Advanced Front Air Bag Operation Advanced Front Air Bags are designed to provide additional protection by supplementing the seat belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 The steering wheel hub trim cover and the upper right Supplemental Side Air Bags side of the instrument panel separate and fold out of the Your vehicle is equipped with two types of side air bags: way as the air bags inflate to their full size. The Advanced 1. Supplemental Seat-Mounted Side Air Bags (SABs): Front Air Bags fully inflate in less time than it takes to Located in the outboard side of the front seats. The blink your eyes.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABs may help to reduce the risk of occupant injury 2. Supplemental Side Air Bag Inflatable Curtains (SABICs): Located above the side windows. The trim during certain side impact and certain rollover events, in covering the SABICs is labeled “SRS AIRBAG” or addition to the injury reduction potential provided by the “AIRBAG”. seat belts and body structure. When the SAB deploys, it opens the seam on the outboard side of the seatback’s trim cover.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 SABICs may help reduce the risk of head injury to front and rear seat outboard occupants. SABICs may reduce the risk of injuries in certain side impact and vehicle rollover events, in addition to the injury reduction potential provided by the seat belts and body structure. The SABICs deploy downward, covering the side windows. An inflating SABIC pushes the outside edge of the trim out of the way and covers the window.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABICs and SABs (“Side Air Bags”) are designed to activate in certain side impacts and certain rollover events. The Occupant Restraint Controller (“ORC”) determines whether the deployment of the Side Air Bags in a particular side impact or rollover event is appropriate, based on the severity and type of collision. Vehicle damage by itself is not a good indicator of whether or not Side Air Bags should have deployed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 WARNING! (Continued) • Relying on the Side Air Bags alone could lead to more severe injuries in a collision. The Side Air Bags work with your seat belt to restrain you properly. In some collisions, Side Air Bags won’t deploy at all. Always wear your seat belt even though you have Side Air Bags. Side Air Bags deploy independently; a left side impact deploys the left Side Air Bags only and a right side impact deploys the right Side Air Bags only.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Side Air Bags will not deploy in all rollover events. If you do have a collision, which deploys the air bags, any The rollover sensing-system determines if a rollover or all of the following may occur: event may be in progress and whether deployment is • The air bag material may sometimes cause abrasions appropriate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 doctor. If these particles settle on your clothing, follow Enhanced Accident Response System the garment manufacturer’s instructions for cleaning. In the event of an impact, if the communication network Do not drive your vehicle after the air bags have de- remains intact, and the power remains intact, depending ployed. If you are involved in another collision, the air on the nature of the event, the ORC will determine bags will not be in place to protect you.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The ORC contains a backup power supply system that may deploy the air bags even if the battery loses power or In order to reset the Enhanced Accident Response System it becomes disconnected prior to deployment. functions after an event, the ignition switch must be changed from ignition START or ON/RUN to ignition OFF.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 While the air bag system is designed to be maintenance NOTE: If the speedometer, tachometer, or any engine free, if any of the following occurs, have an authorized related gauges are not working, the Occupant Restraint dealer service the air bag system immediately. Controller (ORC) may also be disabled. In this condition the air bags may not be ready to inflate for your protec• The Air Bag Warning Light does not come on during tion.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Air Bag System WARNING! (Continued) WARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 These data can help provide a better understanding of This vehicle is equipped with an event data recorder the circumstances in which crashes and injuries occur. (EDR).
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraints Everyone in your vehicle needs to be buckled up at all times, including babies and children. Every state in the United States, and every Canadian province, requires that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it. WARNING! In a collision, an unrestrained child can become a projectile inside the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Before buying any restraint system, make sure that it NOTE: has a label certifying that it meets all applicable Safety • For additional information, refer to www.seatcheck.org or Standards. You should also make sure that you can install call 1–866–SEATCHECK (732–8243). Canadian residents it in the vehicle where you will use it. should refer to Transport Canada’s website for additional information: • www.tc.gc.ca/eng/roadsafety/safedriverschildsafety-index-53.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Larger Children Children Too Large for Child Restraints Child Size, Height, Weight Or Age Children who have out-grown their forward-facing child restraint, but are too small to properly fit the vehicle’s seat belt Children 12 years old or younger, who have out-grown the height or weight limit of their booster seat Infants And Child Restraints Safety experts recommend that children ride rear-facing in the vehicle until they are two years old or until they re
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 WARNING! • Never place a rear-facing child restraint in front of an air bag. A deploying passenger Advanced Front Air Bag can cause death or serious injury to a child 12 years or younger, including a child in a rearfacing child restraint. • Only use a rear-facing child restraint in a vehicle with a rear seat. have outgrown the rear-facing weight or height limit of their rear-facing convertible child seat.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint. • After a child restraint is installed in the vehicle, do not move the vehicle seat forward or rearward because it can loosen the child restraint attachments.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 4. Is the lap part of the seat belt as low as possible, touching the child’s thighs and not their stomach? WARNING! 5. Can the child stay seated like this for the whole trip? Never allow a child to put the shoulder belt under an arm or behind their back. In a crash, the shoulder belt will not protect a child properly, which may result in serious injury or death. A child must always wear both the lap and shoulder portions of the seat belt correctly.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Weight of the Child + Child Restraint Rear-Facing Child Restraint Rear-Facing Child Restraint Forward-Facing Child Restraint Forward-Facing Child Restraint Up to 65 lbs (29.5 kg) More than 65 lbs (29.5 kg) Up to 65 lbs (29.5 kg) More than 65 lbs (29.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Lower Anchors And Tethers For Children (LATCH) Restraint System Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCHequipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 LATCH POSITION TABLE What is the weight limit (child’s weight 65 lbs (29.5 kg) Use the LATCH anchorage system until + weight of the child restraint) for using the combined weight of the child and the the LATCH anchorage system to attach child restraint is 65 lbs (29.5 kg). Use the the child restraint? seat belt and tether anchor instead of the LATCH system once the combined weight is more than 65 lbs (29.5 kg).
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH POSITION TABLE Can two child restraints be attached No Never “share” a LATCH anchorage with using a common lower LATCH two or more child restraints. If the center anchorage? position does not have dedicated LATCH lower anchorages, use the seat belt to install a child seat in the center position next to a child seat using the LATCH anchorages in an outboard position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between the seatback and seat cushion.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. There are tether strap anchorages behind each Each will have a hook or connector to attach to the lower rear seating position located on the back of the anchorage and a way to tighten the connection to the seat. anchorage. Forward-facing child restraints and some rear-facing child restraints will also be equipped with a tether strap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 WARNING! Never use the same lower anchorage to attach more than one child restraint. If you are installing LATCHcompatible child restraints next to each other, you must use the seat belt for the center position. You can then use either the LATCH anchors or the vehicle’s seat belt for installing child seats in the outboard positions. Please refer to “Installing The LATCHCompatible Child Restraint System” for typical installation instructions.
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Attach the lower hooks or connectors of the child How To Stow An Unused ALR Seat Belt: restraint to the lower anchorages in the selected seat- When using the LATCH attaching system to install a ing position. child restraint, stow all ALR seat belts that are not being 5. If the child restraint has a tether strap, connect it to the used by other occupants or being used to secure child top tether anchorage. See the section “Installing Child restraints.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 WARNING! • Improper installation of a child restraint to the LATCH anchorages can lead to failure of the restraint. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint. • Child restraint anchorages are designed to withstand only those loads imposed by correctly-fitted child restraints.
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 LAP/SHOULDER BELT SYSTEMS What is the weight limit (child’s weight Weight limit of the Always use the tether anchor when using the + weight of the child restraint) for Child Restraint seat belt to install a forward facing child using the Tether Anchor with the seat restraint, up to the recommended weight belt to attach a forward facing limit of the child restraint.
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. To lock the seat belt, pull down on the shoulder part of the seat belt until you have pulled all the seat belt webbing out of the retractor. Then, allow the webbing 1. Place the child seat in the center of the seating to retract back into the retractor. As the webbing position. For some second row seats, you may need to retracts, you will hear a clicking sound.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 strap. See the section “Installing Child Restraints Using the Top Tether Anchorage” for directions to attach a tether anchor. 9. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the seat belt path. It should not move more than 1 inch (25.4 mm) in any direction. Any seat belt system will loosen with time, so check the seat belt occasionally, and pull it tight if necessary.
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position, move the child restraint to another position in the vehicle if one is available. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 WARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap. • If your vehicle is equipped with a split rear seat, make sure the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap.
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! WARNING! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Exhaust Gas WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO), follow these safety tips: • Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area.
100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Inside The Vehicle Seat Belts dealer. If the light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer. Inspect the seat belt system periodically, checking for cuts, Defroster frays, and loose parts. Damaged parts must be replaced Check operation by selecting the defrost mode and place immediately. Do not disassemble or modify the system. the blower control on high speed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 WARNING! WARNING! (Continued) Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury. • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle.
102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside The Vehicle Door Latches Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel nuts for tightness. Check the tires (including spare) for proper cold inflation pressure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ! MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 ! Uconnect® PHONE — IF EQUIPPED . . . . . . . .111 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . .107 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . .113 ▫ Automatic Dimming Mirror — If Equipped . . .108 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . .121 ▫ Outside Mirror — Driver Side . . . . . . . . . . . .109 ▫ Uconnect® Phone Features . . . . .
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . .144 ! TO OPEN AND CLOSE THE HOOD . . . . . . . . .160 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . . .148 ! LIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163 ! SEATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148 ▫ Multifunction Lever . . . . . . . . . . . . . . . . . . .163 ▫ Power Seats — If Equipped . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 ▫ Windshield Wiper Operation . . . . . . . . . . . . .169 ! PARKVIEW® REAR BACK UP CAMERA — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . ▫ Intermittent Wiper System . . . . . . . . . . . . . . .169 ! GARAGE DOOR OPENER — IF EQUIPPED ▫ Windshield Washers . . . . . . . . . . . . . . . . . . .169 ▫ Before You Begin Programming HomeLink® ▫ Mist Feature . . . . . . . . . . . . . . . . . . . . . . . . .170 ▫ Programming A Rolling Code . . . . . . . . . .
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Closing Sunroof — Express. . . . . . . . . . . . . . .189 ▫ Door Storage . . . . . . . . . . . . . . . . . . . . . . . . .198 ▫ Closing Sunroof — Manual Mode . . . . . . . . . .189 ! CONSOLE FEATURES . . . . . . . . . . . . . . . . . . .199 ▫ Pinch Protect Feature . . . . . . . . . . . . . . . . . . .189 ! CARGO AREA FEATURES . . . . . . . . . . . . . . . .200 ▫ Venting Sunroof — Express . . . . . . . . . . . . . .190 ▫ Cargo Light . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. 3 Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate. NOTE: This feature is disabled when the vehicle is moving in reverse.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Outside Mirror — Driver Side Adjust the flat outside mirror so you can just see the side of your vehicle in the part of the mirror closest to the vehicle with your head close to the door glass. Outside Mirror — Passenger Side WARNING! (Continued) collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger side convex mirror.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When you are finished adjusting the mirror, turn the The power mirror control is located on the driver’s door control to the center position to prevent accidentally moving a mirror. trim panel. Power Mirrors Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defroster. Refer to “Rear Window Features” in “Understanding The Features Of Your Vehicle” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Uconnect® PHONE — IF EQUIPPED Uconnect® Phone is a voice-activated, hands-free, invehicle communications system. Uconnect® Phone allows you to dial a phone number with your mobile phone using simple voice commands (e.g., “Call” $ “Mike” $ “Work” or “Dial” $ “248-555-1212”). Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect® Phone.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect® Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. WARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. Your attention should be focused on safely operating the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Voice Command Button Operation Actual button location may vary with the ra- Voice commands can be used to operate the Uconnect® dio. The individual buttons are described in the Phone and to navigate through the Uconnect® Phone menu structure. Voice commands are required after most “Operation” section. Uconnect® Phone prompts.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE part of the command when you are asked for it. For example, you can use the compound form voice command “Phonebook New Entry,” or you can break the compound form command into two voice commands: “Phonebook” and “New Entry.” Please remember, the Uconnect® Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. Voice Command Tree Refer to “Voice Tree” in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 The following are general phone to Uconnect® Phone You will then be asked to give your mobile phone a priority level between one and seven, with one being the pairing instructions: highest priority. You can pair up to seven mobile phones 1. Activate the Bluetooth® on your mobile phone. to your Uconnect® Phone. However, at any given time, button to begin. 2. Push the only one mobile phone can be in use, connected to your 3.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE or downloaded phonebook. To learn how to store a name in the phonebook, refer to “Add Names to Your Uconnect® Phonebook.” • The system will prompt you to say the number you want to call. • For example, you can say “234-567-8901.” • The Uconnect® Phone will confirm the phone number and then dial. The number will appear in the display of certain radios. Call By Saying A Name • Push the button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • When prompted, enter the number designation (e.g., “Home,” “Work,” “Mobile,” or “Other”). This will allow you to store multiple numbers for each phonebook entry, if desired. Phonebook Download — Automatic Phonebook Transfer From Mobile Phone If equipped and specifically supported by your phone, Uconnect® Phone automatically downloads names (text • When prompted, recite the phone number for the names) and number entries from your mobile phone’s phonebook.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • A maximum of 2,000 entries per phone will be down- Edit Uconnect® Phonebook Entries loaded and updated every time a phone is connected NOTE: Editing phonebook entries is recommended to the Uconnect® Phone. when the vehicle is not in motion. Automatic down• Depending on the maximum number of entries down- loaded phonebook entries cannot be deleted or edited. loaded, there may be a short delay before the latest button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 After you are finished editing an entry in the phonebook, • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish you will be given the opportunity to edit another entry in to delete. You can either say the name of a phonebook the phonebook, call the number you just edited, or return entry that you wish to delete or you can say “List to the main menu.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete/Erase “All” Uconnect® Phonebook Entries List All Names In The Uconnect® Phonebook • Push the • Push the button to begin. button to begin. • After the “Ready” prompt and the following beep, say • After the “Ready” prompt and the following beep, say “Phonebook Erase All.” “Phonebook List Names.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Phone Call Features The following features can be accessed through the Uconnect® Phone if the feature(s) are available on your mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the Uconnect® Phone. Check with your mobile service provider for the features that you have.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE call. The first call will be on hold while the second call is in progress. To go back to the first call, refer to “Toggling Between Calls” in this section. To combine two calls, refer to “Conference Call” in this section. Place/Retrieve A Call From Hold Conference Call When two calls are in progress (one active and one on button until you hear a hold), push and hold the double beep indicating that the two calls have been joined into one conference call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically. This is cell phone-dependent. To bring the call button until you back from hold, push and hold the hear a single beep. Call Continuation Call continuation is the progression of a phone call on the Uconnect® Phone after the vehicle ignition has been switched to OFF.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect® Phone Features Emergency Assistance Language Selection If you are in an emergency and the mobile phone is reachable: To change the language that the Uconnect® Phone is using: 1. Push the button to begin. • Pick up the phone and manually dial the emergency number for your area. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 NOTE: • The emergency number dialed is based on the country where the vehicle is purchased (911 for the U.S. and Canada and 060 for Mexico). The number dialed may not be applicable with the available mobile service and area. WARNING! To use your Uconnect® Phone System in an emergency, your mobile phone must be: • turned on, • paired to the Uconnect® System, • and have network coverage.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE button and say “Setup,” folTo do this, push the lowed by “Towing Assistance.” When prompted say 1-800-521-2779 for U.S./Canada, say 55-14-3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico. You can use your Uconnect® Phone to access a voice mail system or an automated service, such as a paging service or automated customer service line. Some services require immediate response selection.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 call and then push the button and say “Send.” The system will prompt you to enter the name or number and say the name of the phonebook entry you wish to send. The Uconnect® Phone will then send the corresponding phone number associated with the phonebook entry, as tones over the phone. NOTE: could push the button and say, “Pair a Phone” to select that option without having to listen to the rest of the voice prompt.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE notification to inform you of your phone and network status when you are attempting to make a phone call using Uconnect® Phone. The status is given for network signal strength, phone battery strength, etc. situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Advanced Phone Connectivity List Paired Mobile Phone Names Transfer Call To And From Mobile Phone • Push the button to begin. The Uconnect® Phone allows ongoing calls to be trans- • After the “Ready” prompt and the following beep, say ferred from your mobile phone to the Uconnect® Phone “Setup Phone Pairing.” without terminating the call. To transfer an ongoing call from your Uconnect® Phone paired mobile phone to the • When prompted, say “List Phones.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Select Another Mobile Phone Delete Uconnect® Phone Paired Mobile Phones This feature allows you to select and start using another • Push the button to begin. phone paired with the Uconnect® Phone. • After the “Ready” prompt and the following beep, say button to begin. • Push the “Setup Phone Pairing.” • After the “Ready” prompt and the following beep, say • At the next prompt, say “Delete” and follow the prompts. “Setup Select Phone” and follow the prompts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 best results, the Voice Training session should be completed when the vehicle is parked with the engine For users experiencing difficulty with the system recogrunning, all windows closed, and the blower fan nizing their voice commands or numbers, the Uconnect® switched off. Phone Voice Training feature may be used. To enter this training mode, follow one of the two following proce- This procedure may be repeated with a new user.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Command For best performance: • Smooth road surface • Fully closed windows • Adjust the rearview mirror to provide at least ½ inch • Dry weather condition (1 cm) gap between the overhead console (if equipped) NOTE: and the mirror. • Even though the system is designed for users speaking • Always wait for the beep before speaking.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • Phonebook (Downloaded and Uconnect® Phone Lo- • cal) name recognition rate is optimized when the • entries are not similar. • • Numbers must be spoken in single digits. “800” must • be spoken “eight-zero-zero” not “eight hundred.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Text Reply Send Messages: Uconnect® Phone can read or send new messages on You can send messages using Uconnect® Phone. To send your phone. a new message: Read Messages: 1. Push the button. If you receive a new text message while your phone is 2. After the “Ready” prompt and the following beep, say connected to Uconnect® Phone, an announcement will “SMS Send” or “Send Message.” be made to notify you that you have a new text message. 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 List of Preset Messages: 11. See you in 15 minutes. 1. Yes. 12. I am on my way. 2. No. 13. I’ll be late. 3. Where are you? 14. Are you there yet? 4. I need more direction. 15. Where are we meeting? 5. L O L. 16. Can this wait? 6. Why? 17. Bye for now. 7. I love you. 18. When can we meet? 8. Call me. 19. Send number to call. 9. Call me later. 20. Start without me. 10. Thanks.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Voice Text Reply Incoming Announcement ON/OFF Bluetooth® Communication Link Mobile phones have been found to lose connection to the Turning the Voice Text Reply Incoming Announcement Uconnect® Phone. When this happens, the connection OFF will stop the system from announcing the new can generally be reestablished by switching the phone off/on. Your mobile phone is recommended to remain in incoming messages. Bluetooth® ON mode. button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 3
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 3
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Primary Alternate (s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location Voice Commands Primary Alternate (s) all call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Voice Commands Primary Alternate (s) help home language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book Voice Commands Primary Alternate (s) previous record again redial return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect® Tutorial voice training work yes 3
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information VOICE COMMAND — IF EQUIPPED This device complies with Part 15 of the FCC rules and Voice Command System Operation RSS 210 of Industry Canada.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 WARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. Pushing the Voice Command button while the system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or change commands.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE At any point, if the system does not recognize one of your 3. Use the ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level while the Voice Comcommands, you will be prompted to repeat it. mand system is speaking. Please note the volume To hear the first available Menu, push the Voice Comsetting for Voice Command is different than the audio button and say “Help” or “Main Menu.” mand system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 • “USB” (to switch to USB mode) Radio FM • “System Setup” (to switch to system setup) • “Next Station” (to select the next station) • “Bluetooth Streaming” (to switch to Bluetooth® Stream- To switch to the FM band, say “FM” or “Radio FM.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Previous Channel” (to select the previous channel) • “List Channel” (to hear a list of available channels) • “Select Name” (to say the name of a channel) • “Menu Radio” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Disc Mode USB Mode To switch to USB mode, say “USB.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Memo Mode – “Previous” (to play the previous memo) To switch to the voice recorder mode, say “Memo.” In this mode, you may say the following commands: – “Delete” (to delete a memo) – “Delete All” (to delete all memos) • “New Memo” (to record a new memo) — During the Setup recording, you may push the Voice Command button to stop recording.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Tutorial” 2. Repeat the words and phrases when prompted by Uconnect® Voice. For best results, the “Voice Training” • “Voice Training” session should be completed when the vehicle is NOTE: Keep in mind that you have to push the Voice parked, engine running, all windows closed, and the button first and wait for the beep Command blower fan switched off. This procedure may be rebefore speaking the “Barge In” commands. peated with a new user.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 WARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Be sure everyone in your vehicle is in a seat and using a seat belt properly. 3 Power Seats — If Equipped Some models may be equipped with a power driver’s seat.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 30 minutes of continuous operation. At that time, the On some models, the front driver and passenger seats display will change from HI to LO, indicating the change. may be equipped with heaters in both the seat cushions When the LOW-level heating is selected, the system automatically turns the heater and the indicator light and seatbacks.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. Manual Front Seat Adjustment On models equipped with manual seats, the adjusting bar is located at the front of the seats, near the floor.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Lumbar — If Equipped Driver’s Seatback Recline The lumbar adjustment handle is located on the inboard side of the driver’s seatback. Rotate the lever downward to increase the lumbar support or rotate the lever upward to decrease the lumbar support. To adjust the seatback, lift the lever located on the outboard side of the seat, lean back to the desired angle and release the lever.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 WARNING! WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. The head restraints for all occupants must be properly adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 3 Active Head Restraint (Normal Position) Active Head Restraint (Tilted Position)
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer. • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things To Know Before Starting Your Vehicle” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Folding Rear Seat To provide additional storage area, each rear seatback can be folded forward. Pull the strap forward to fold the rear seatback flat. 3 Folded Rear Seat To raise the seatback, pull the strap forward and lift the seatback into its upright position.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 2. Move the safety latch, located outside the vehicle under the front edge of the hood, toward the center and raise the hood.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lift the hood prop rod, clipped to the right side (left side facing hood) of the engine compartment to secure the hood in the open position. Place the hood prop at the location stamped into the inner hood surface. CAUTION! To prevent possible damage: • Before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. • Do not slam the hood to close it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 LIGHTS Headlights And Parking Lights Turn the end of the multifunction lever to the first detent Multifunction Lever The multifunction lever controls the operation of the to turn on the parking lights. Turn the end of the lever to headlights, parking lights, turn signals, headlight beam the second detent to turn on the headlights. selection, instrument panel light dimming, interior lights, the passing lights, and the fog lights.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Daytime Running Lights — If Equipped The high beam lights will come on as Daytime Running Lights (lower intensity), whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is off, the turn signal is off, and the shift lever is in any position except PARK.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 NOTE: If either light remains on and does not flash, or Move the multifunction lever up or down and the arrows there is a very fast flash rate, check for a defective outside on each side of the instrument cluster flash to show light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is proper operation of the front and rear turn signal lights. defective.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the center portion of the lever upward to the next detent position to brighten the odometer and radio when You can signal another vehicle with your headlights by the parking lights or headlights are on. lightly pulling the multifunction lever toward you. This will turn on the high beam headlights until the lever is Rotate the center portion of the lever upward to the last detent to turn on the interior lighting. released.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Map/Reading Lights These lights are mounted between the sun visors above the rear view mirror. Each light is turned on by pressing the button. Press the button a second time to turn the light off. The lights also come on when a door is opened or the dimmer control is turned fully upward, past the second detent.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer control lever is located on the right side of the steering column. The front wipers are operated by rotating a switch, located on the end of the lever. For information on the rear wiper/washer, refer to “Rear Window Features” in “Understanding The Features Of Your Vehicle”. Wiper/Washer Control Lever CAUTION! • Turn the windshield wipers off when driving through an automatic car wash.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Windshield Wiper Operation Intermittent Wiper System Rotate the end of the lever upward to the second detent past the intermittent settings for low-speed wiper operation. Rotate the end of the lever upward to the third detent past the intermittent settings for high-speed wiper operation. Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause between cycles, desirable.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE lever is released, and then resume the intermittent inter- NOTE: The mist feature does not activate the washer val previously selected. pump; therefore, no washer fluid will be sprayed on the If the lever is pulled while in the off position, the wipers windshield. The wash function must be used in order to spray the windshield with washer fluid. will operate for two wipe cycles, then turn off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 TILT STEERING COLUMN This feature allows you to tilt the steering column upward or downward. The tilt steering column lever is located on the left side of the steering column, below the turn signal lever. 3 Push down on the lever to unlock the steering column. With one hand firmly on the steering wheel, move the steering column up or down, as desired. Push the lever up to lock the steering column firmly in place.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate The speed increment shown is dependant on the chosen speed unit of U.S. (mph) or Metric (km/h): A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the U.S. Speed (mph) vehicle will deactivate the Electronic Speed Control with• Pressing the RES (+) button once will result in a 1 mph out erasing the set speed from memory. increase in set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 • If the button is continually pressed, the set speed will continue to decrease until the button is released, then When the Electronic Speed Control is set, you can dethe new set speed will be established. crease speed by pushing the SET (-) button. The speed decrement shown is dependant on the chosen To Accelerate For Passing To Decrease Speed speed unit of U.S. (mph) or Metric (km/h): U.S. Speed (mph) Press the accelerator as you would normally.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery. After five seconds this note will disappear. The ParkView® camera is located on the rear of the vehicle above the rear license plate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 When displayed, static grid lines will illustrate the width that will help indicate the distance to the rear of the of the vehicle while a dashed center-line will indicate the vehicle. The following table shows the approximate center of the vehicle to assist with aligning to a hitch/ distances for each zone: receiver.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • To avoid vehicle damage, ParkView® should only be used as a parking aid. The ParkView® camera is unable to view every obstacle or object in your drive path. • To avoid vehicle damage, the vehicle must be driven slowly when using ParkView® to be able to stop in time when an obstacle is seen. It is recommended that the driver look frequently over his/her shoulder when using ParkView®.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 3 HomeLink® Buttons/Overhead Consoles HomeLink® Buttons/Sunvisor/Headliner NOTE: HomeLink® is disabled when the Vehicle Security Alarm is active.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Before You Begin Programming HomeLink® NOTE: Be sure that your vehicle is parked outside of the garage • Erasing all channels should only be performed when before you begin programming. programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 1. Cycle the ignition to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 inch (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. 3. Push and hold the HomeLink® button you want to program while you push and hold the hand-held transmitter button. Training The Garage Door Opener 1 — Door Opener 2 — Training Button 4. Continue to hold both buttons and observe the indicator light.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. At the garage door opener motor (in the garage), locate the “LEARN” or “TRAINING” button. This can usually be found where the hanging antenna wire is attached to the garage door opener/device motor. Firmly push and release the “LEARN” or “TRAINING” button. On some garage door openers/devices there may be a light that blinks when the garage door opener/device is in the LEARN/TRAIN mode.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Programming A Non-Rolling Code For programming Garage Door Openers manufactured before 1995. 5. Push and hold the programmed HomeLink® button and observe the indicator light. 1. Turn the ignition switch to the ON/RUN position. • If the indicator light stays on constantly, programming is complete and the garage door/device should activate when the HomeLink® button is pushed. 2.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Without releasing the button proceed with “Program- It may be helpful to unplug the device during the cycling ming A Non-Rolling Code” step 2 and follow all process to prevent possible overheating of the garage door or gate motor. remaining steps. Canadian/Gate Operator Programming 1. Cycle the ignition to the ON/RUN position. For programming transmitters in Canada/United States 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 4. Watch for the HomeLink® indicator to change flash rates. When it changes, it is programmed. It may take up to 30 seconds or longer in rare cases. The garage door may open and close while you are programming. Reprogramming A Single HomeLink® Button (Canadian/Gate Operator) To reprogram a channel that has been previously trained, follow these steps: 5. Push and hold the programmed HomeLink® button 1. Cycle the ignition to the ON/RUN position.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using HomeLink® Troubleshooting Tips To operate, push and release the programmed HomeLink® button. Activation will now occur for the programmed device (i.e., garage door opener, gate operator, security system, entry door lock, home/office lighting, etc.,). The hand-held transmitter of the device may also be used at any time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 WARNING! Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power sunroof switch is located on the overhead console. Power Sunroof Switch WARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location accessible to children. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 position. The sunroof will close fully and stop automatically. This is called “Express Close”. During Express Press the switch rearward and release it within one-half Close operation, any movement of the switch will stop second. The sunroof and sunshade will open automatithe sunroof. cally from any position. The sunroof and sunshade will open fully and stop automatically. This is called “Express Closing Sunroof — Manual Mode Open”.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Venting Sunroof — Express Press and release the Vent button within one half second and the sunroof will open to the vent position. This is called “Express Vent”, and it will occur regardless of sunroof position. During Express Vent operation, any movement of the switch will stop the sunroof. Sunshade Operation open or partially open positions. This is a normal occurrence and can be minimized.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 For Vehicles Equipped With The EVIC The power sunroof switch will remain active for up to approximately ten minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. 3 ELECTRICAL POWER OUTLETS There is a standard 12 Volt (13 Amp) power outlet located in the Integrated Center Stack (ICS) for added convenience. This power outlet can power mobile phones, electronics and other low power devices.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. • Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your New Vehicle Limited Warranty.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 WARNING! CAUTION! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED A 115 Volt (150 Watt) AC power inverter is located on the front of the center console for added convenience. This outlet can power mobile phones, electronics and other low power devices requiring power up to 150 Watts. Certain high-end video games, such as Playstation3 and XBox360 will exceed this power limit, as will most power tools. The power inverter is designed with built-in overload protection.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 WARNING! (Continued) CAUTION! (Continued) • Do not touch with wet hands. • Close the lid when not in use. • If this outlet is mishandled, it may cause an electric shock and failure. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly. Only use these intermittently and with great caution.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE There are two cupholders located in the back for the rear Your vehicle is equipped with four cupholders. There are passengers. two illuminated cupholders located in the front.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 STORAGE Glove Compartment And Storage Bin Located on the passenger side of the instrument panel are an upper storage bin and a lower glove compartment. To open the lower glove compartment, pull outward on the release handle.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Door Storage The interior door panels are equipped with lower storage areas.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 To open the lower storage compartment, lift upward on CONSOLE FEATURES The floor console contains both an upper and lower the lower handle to unlatch the lower storage compartment and lift the lid open. storage compartment. To open the upper storage compartment, push inward on the upper handle to unlatch the upper lid and lift the lid open.
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not operate this vehicle with a console compartment lid in the open position. Driving with the console compartment lid open may result in injury in a collision. To install the Cargo Cover, insert either end of the cover into one of the two notches located in the rear trim panels. With one of the cover ends installed, push inward on the opposite end and install it into the same notch location of the rear trim panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 Using the handle, pull the cover toward you and guide the rear cover posts into the guides located on both sides of the rear trim panel. Cargo Cover Guides WARNING! In a collision a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compartment. Remove the cover from the vehicle when taken from its mounting.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Removable Load Floor Cargo Tie-Down Loops The cargo area load floor is removable and can be There are four tie-downs (D-rings) installed in the cargo washed with mild soap and water. area for securing cargo.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 WARNING! WARNING! (Continued) • Cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. • The weight and position of cargo and passengers can change the vehicle center of gravity and vehicle handling.
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold Down Speakers — If Equipped REAR WINDOW FEATURES When the liftgate is open, the speakers can swing down off Rear Window Wiper/Washer the trim panel to face rearward, for tailgating and other The rear wiper/washer is controlled by a rotary switch activities. located on the center portion of the control lever. The control lever is located on the right side of the steering column.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 Rotate the center portion of the lever upward to Rear Window Defroster the first detent position for rear wiper operation. The rear window defroster button is located on NOTE: The rear wiper operates in an intermittent mode the climate controls mode control knob. Push the only. button to turn on the rear window defroster and the heated outside mirrors (if equipped).
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 approximately eight turns, then move the crossbar to the desired position, keeping the crossbars perpendicular to the luggage rack side rails. Once the crossbar is in one of the seven detent positions, retighten the thumb screws to lock the crossbar into position.
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward lift to a load. This is especially true on large flat loads and may result in damage to the cargo or your vehicle. WARNING! Cargo must be securely tied before driving your vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ! INSTRUMENT PANEL FEATURES . . . . . . . . . .212 ▫ Average Fuel Economy. . . . . . . . . . . . . . . . . .234 ! INSTRUMENT CLUSTER . . . . . . . . . . . . . . . . .213 ▫ Distance To Empty (DTE) . . . . . . . . . . . . . . . .235 ! INSTRUMENT CLUSTER DESCRIPTIONS . . . . .214 ▫ Tire Pressure Monitor (TPM). . . . . . . . . . . . . .235 ! MINI-TRIP COMPUTER — IF EQUIPPED . . . . .228 ▫ Elapsed Time . . . . . . . . . . . . . . . . . . . . . . . .
210 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operation Instructions — DISC Mode For CD And MP3/WMA Audio Play, DVD – Video . . .250 ▫ Operation Instructions — CD MODE For CD And MP3 Audio Play . . . . . . . . . . . . . . .265 ▫ LIST Button — DISC Mode For MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . .254 ▫ Notes On Playing MP3 Files . . . . . . . . . . . . .267 ▫ Operation Instructions — Auxiliary Mode ▫ INFO Button — DISC Mode For ! Uconnect® 130 WITH SATELLITE RADIO . MP3/WMA Play . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 211 ▫ Using This Feature. . . . . . . . . . . . . . . . . . . . .288 ! CD/DVD DISC MAINTENANCE . . . . . . . . . . .296 ! RADIO OPERATION AND MOBILE PHONES ▫ Controlling The iPod® Or External USB Device Using Radio Buttons . . . . . . . . . . . . . . . . . . . .289 ! CLIMATE CONTROLS . . . . . . . . . . . . . . . . ▫ Play Mode . . . . . . . . . . . . . . . . . . . . . . . . . .289 ▫ Manual Heating And Air Conditioning . . . ▫ List Or Browse Mode . . . . . . . . . . . . .
212 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 — Air Outlet — Demisters — Instrument Cluster — Radio 5 6 7 8 — — — — Storage Bin Glove Compartment Climate Controls Power Outlet 9 — Heated Seat Switch – If Equipped 10 — Hazard Warning Flasher 11 — ESC OFF Switch – If Equipped 12 — Heated Seat Switch – If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 213 INSTRUMENT CLUSTER 4
214 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge /Fuel Door Reminder When the ignition switch is in the ON/RUN position, the pointer will show the level of fuel remaining in the fuel tank. The fuel pump symbol points to the side of the vehicle where the fuel door is located. 2. Charging System Light This light shows the status of the electrical charging system.
UNDERSTANDING YOUR INSTRUMENT PANEL 215 on briefly as a bulb check. If the light does not come on 6. Speedometer during starting, have the system checked by an authoThe Speedometer shows the vehicle speed in miles per rized dealer. hour (MPH) and kilometers per hour (km/h). 4. Oil Pressure Warning Light 7. Air Bag Warning Light This light indicates low engine oil pressure.
216 UNDERSTANDING YOUR INSTRUMENT PANEL If the vehicle is driven more than 1 mile (1.6 km) with the conventional brake system will continue to operate either turn signal on, a continuous chime will sound to normally if the BRAKE warning light is not on. alert you to turn the signals off. If either indicator flashes If the ABS light is on, the brake system should be serviced at a rapid rate, check for a defective outside light bulb. as soon as possible to restore the benefits of Anti-Lock 9.
UNDERSTANDING YOUR INSTRUMENT PANEL 217 vehicle. If the temperature reading does not return to normal, turn the engine off immediately and call for The white area of the scale shows the permissible engine service. Refer to “If Your Engine Overheats” in “What To revolutions-per-minute (RPM x 1000) for each gear range. Do In Emergencies” for further information. Before reaching the red area, ease up on the accelerator to 14. Brake Warning Light prevent engine damage. 12. Tachometer 13.
218 UNDERSTANDING YOUR INSTRUMENT PANEL In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake and a brake pedal pulsation may be felt during each stop. The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic system.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. WARNING! NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. If you continue operating the vehicle when the Transmission Temperature Warning Light is illuminated you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. 15.
220 UNDERSTANDING YOUR INSTRUMENT PANEL The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. CAUTION! Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a The Shift Lever Indicator is self-contained within the different size than the size indicated on the vehicle placard instrument cluster. It displays the gear position of the or tire inflation pressure label, you should determine the automatic transmission. proper tire inflation pressure for those tires.
222 UNDERSTANDING YOUR INSTRUMENT PANEL maintain correct tire pressure, even if under-inflation has tires or wheels on your vehicle, to ensure that the not reached the level to trigger illumination of the TPMS replacement or alternate tires and wheels allow the TPMS low tire pressure telltale. to continue to function properly. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly.
UNDERSTANDING YOUR INSTRUMENT PANEL 223 23. Odometer Display/Trip Odometer Display Area Vehicle Odometer Messages This display indicates the total distance the vehicle has When the appropriate conditions exist, the following odometer messages will display: been driven. NOTE: U.S. Federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven.
224 UNDERSTANDING YOUR INSTRUMENT PANEL “HOTOIL” message will be displayed in the odometer If the vehicle diagnostic system determines that the fuel along with a chime. filler cap is loose, improperly installed, or damaged, a Refer to “Engine Oil Overheating” under in “What To Do “gASCAP” message will display in the odometer display In Emergencies”. area. Tighten the fuel filler cap properly and press the CHANgE OIL Message TRIP ODOMETER button to turn off the message.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 oil change indicator system (after performing the sched- If the bulb does not come on when turning the key from uled maintenance), refer to the following procedure: OFF to ON/RUN, have the condition checked promptly. 1. Turn the ignition switch to the ON/RUN position (do Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the light after not start the engine). engine start. The vehicle should be serviced if the light 2.
226 UNDERSTANDING YOUR INSTRUMENT PANEL 27. Electronic Stability Control (ESC) Activation/ Malfunction Indicator Light — If Equipped A malfunctioning catalytic converter, as referenced The “ESC Activation/Malfunction Indicator above, can reach higher temperatures than in normal Light” in the instrument cluster will come on operating conditions. This can cause a fire if you when the ignition switch is turned to the drive slowly or park over flammable substances such ON/RUN position.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 • Each time the ignition is turned to ON/RUN, the ESC system will be ON, even if it was turned off previously. When blinking: The 4WD system is temporarily disabled due to overload condition. 29. Electronic Vehicle Information Center (EVIC) • The ESC system will make buzzing or clicking Display — If Equipped sounds when it is active.
228 UNDERSTANDING YOUR INSTRUMENT PANEL MINI-TRIP COMPUTER — IF EQUIPPED Control Buttons The Mini-Trip Computer is located in the instrument cluster and features a driver-interactive trip information and temperature display. NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated temperature is displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL 229 STEP Button Trip Odometer (ODO) Push the STEP button located on the steering wheel to This display shows the distance traveled since the last scroll through sub menus (i.e., Temperature, Trip Func- reset. Push and release the STEP button on the instrutions: Odometer, Trip A, Trip B). ment cluster to switch from odometer, to Trip A or Trip B.
230 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED The EVIC consists of the following: • System Status The Electronic Vehicle Information Center (EVIC) fea• Units tures a driver-interactive display that is located in the instrument cluster.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 The system allows the driver to select information by MENU Button pushing the following buttons mounted on the steering Push and release the MENU button to scroll wheel: through the main menus (Fuel Economy, Warnings, Timer, Units, System, Personal Settings) or to exit submenus. COMPASS Button Push and release the COMPASS button to display one of eight compass readings and the outside temperature or to exit sub-menus.
232 UNDERSTANDING YOUR INSTRUMENT PANEL When the appropriate conditions exist, the EVIC displays • Doors Ajar (with vehicle graphic showing which the following messages: doors are open. A single chime sounds if the vehicle is in motion). • Turn Signal On (with a continuous warning chime after 1 mile (1.
UNDERSTANDING YOUR INSTRUMENT PANEL 233 • Low Tire • Low Tire Pressure Display for Premium TPM System • Service TPM System Engine Oil Change Indicator System — If Equipped Oil Change Required Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, push and release the Trip Odometer button on the instrument cluster.
234 UNDERSTANDING YOUR INSTRUMENT PANEL EVIC Functions • Compass/Temperature/Audio time within three seconds of resetting the currently displayed function. Reset ALL will be displayed during this three-second window. • Average Fuel Economy Compass/Temperature/Audio • Units In Push and release the COMPASS button to display one of eight compass headings to indicate the direction the vehicle is facing, the outside temperature, and the current radio station.
UNDERSTANDING YOUR INSTRUMENT PANEL 235 Distance To Empty (DTE) Tire Pressure Monitor (TPM) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. This is not resettable. Refer to “Starting And Operating”, “Tire Pressure Monitoring System (TPMS)” for system operation.
236 UNDERSTANDING YOUR INSTRUMENT PANEL Pushing the RIGHT/SELECT button while in this display selects English, Espanol, Deutsch, Italiano, Francais or To make your selection, push and release the RIGHT/ NL depending on availability. As you continue, the SELECT arrow button until “US” or “METRIC” appears. displayed information will be shown in the selected Personal Settings (Customer-Programmable language.
UNDERSTANDING YOUR INSTRUMENT PANEL 237 and the transmission is in the PARK or NEUTRAL without the sound horn with lock feature selected. Push position (automatic transmission). Push and hold the and hold the SELECT button when in this display until SELECT button when in this display until “ON” or “ON” or “OFF” appears to make your selection. “OFF” appears to make your selection.
238 UNDERSTANDING YOUR INSTRUMENT PANEL Key Off Power Delay Hill Start Assist (HSA) — If Equipped When this feature is selected the power window switches, radio, Uconnect® phone, power sunroof, and power outlets will remain active for up to 10 minutes after the ignition switch has been turned OFF. Opening either front vehicle door will cancel this feature. Push and hold the SELECT button when in this display until “OFF”, “45 sec.”, “5 min.”, or “10 min.” appears to make your selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 display “CAL” until the compass is calibrated. You may 2. Push and release the MENU button until the Personal Settings (Customer-Programmable Features) menu also calibrate the compass by completing one or more displays in the EVIC. 360–degree turns (in an area free from large metal or metallic objects) until the “CAL” message displayed in 3. Push and release the DOWN button until “Calibrate the EVIC turns off.
240 UNDERSTANDING YOUR INSTRUMENT PANEL the compass will automatically compensate for the differ- 1. ences and provide the most accurate compass heading. 2. NOTE: Magnetic materials should be kept away from the top of the right rear quarter window. This is where 3. the compass sensor is located. Turn the ignition switch ON. Push and hold the COMPASS button for approximately two seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 241 Uconnect® 230 – AM/FM STEREO RADIO AND 6-DISC CD/DVD CHANGER (MP3/WMA AUX JACK) Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
242 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Voice Command Button Uconnect® Phone — Push and release the SEEK buttons to search for the next If Equipped listenable station in AM/FM mode. Push the right switch Push this button to operate the Uconnect® Phone feature to seek up and the left switch to seek down. The radio (if equipped). Refer to “Voice Command” for further will remain tuned to the new station until you make details. another selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 243 The clock can also be set by pushing the SETUP button and selecting the “SET HOME CLOCK” entry. Once in Push the TIME button to alternate locations of the time this display follow the above procedure, starting at and frequency display. step 2. Clock Setting Procedure INFO Button 1. Push and hold the TIME button until the hours blink. Push the INFO button for an RDS station (one with call 2. Adjust the hours by turning the right side TUNE/ letters displayed).
244 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a fifth time Push the rotary TUNE/SCROLL control knob and BASS and FADE will display. Turn the TUNE/SCROLL control will display. Turn the TUNE/SCROLL control knob to knob to the left or right to adjust the sound level between the front and rear speakers. the right or left to increase or decrease the bass tones.
UNDERSTANDING YOUR INSTRUMENT PANEL 245 Toggle the MUSIC TYPE button to select the following format types: Program Type No program type or undefined Adult Hits Classical Classic Rock College Country Foreign Language Information Jazz News Nostalgia 16-Digit Character Display None Adlt Hit Classicl Cls Rock College Country Language Inform Jazz News Nostalga Program Type Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Wea
246 UNDERSTANDING YOUR INSTRUMENT PANEL By pushing the SEEK button when the Music Type icon is • DVD Enter — When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current displayed, the radio will be tuned to the next frequency highlighted selection. Use the remote control to scroll station with the same selected Music Type name. The up and down the menu (if equipped). Music Type function only operates when in the FM mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 • Angle — Repeatedly pressing SELECT will change • Set Home Clock — Pressing the SELECT button the viewing angle if supported by the DVD disc allows you to set the clock. Turn the TUNE/SCROLL (if equipped). control knob to adjust the hours and then press and turn the TUNE/SCROLL control knob to adjust the NOTE: minutes. Press the TUNE/SCROLL control knob again • The available selections for each of the above entries to save changes. varies depending upon the disc.
248 UNDERSTANDING YOUR INSTRUMENT PANEL Audio Language — If Equipped Audio DRC — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting #other.# Enter the country code using the TUNE/SCROLL control knob to scroll up and down to select the number and then push to select. Selecting this item allows you to limit maximum audio dynamic range.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the customer-preferred settings. AM and FM Buttons Push the buttons to select AM or FM mode.
250 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions — DISC Mode For CD And MP3/WMA Audio Play, DVD – Video NOTE: The ignition switch must be in the ON or ACC position to operate the radio. The radio DVD player and many DVD discs are coded by geographic region. These region codes must match for the disc to play. If the region code for the DVD disc does not match the region code for the radio DVD player, it will not play the disc.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 Eject Button — Ejecting Compact Disc(s) Push the EJECT button and the pushbutton with the corresponding number (1-6) where the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show #EJECTING DISC# when the disc is being ejected and prompt the user to remove the disc. the current selection. Pushing and holding the SEEK button will allow you to scroll through the tracks faster in CD and MP3/MWA modes.
252 UNDERSTANDING YOUR INSTRUMENT PANEL Switches the radio into the AM or FM radio mode. files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. Notes On Playing MP3/WMA Files The radio uses the following limits for file systems: AM Or FM Button (CD MODE) The radio can play MP3/WMA files; however, acceptable • Maximum number of directory levels: 8 MP3/WMA file recording media and formats are limited.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 discs. The use of multisession for CD audio or MP3/ WMA playback may result in longer disc loading times. If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.MP3/WMA extension may cause playback problems.
254 UNDERSTANDING YOUR INSTRUMENT PANEL Playlist files are not supported. MP3 Pro files are not To increase the speed of disc loading, it is recommended supported. to use CD-R media and single-session discs. To create a single-session disc, enable the “Disc at Once” option Playback Of MP3/WMA Files before writing to the disc. When a medium containing MP3/WMA data is loaded, LIST Button — DISC Mode For MP3/WMA Play the radio checks all files on the medium.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 Push the INFO button once more to return to #elapsed is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume time# priority mode. down. Push and hold the INFO button for three seconds or more and radio will display song titles for each file. SEEK Button (Auxiliary Mode) Push and hold the INFO button again for three seconds No function. to return to #elapsed time# display.
256 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF (Auxiliary Mode) Dolby® No function. Manufactured under license from Dolby® Laboratories. Dolby® and the double-D symbol are trademarks of Dolby® Laboratories. SET Button (Auxiliary Mode) No function. Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” for further details. Operating Instructions (Uconnect® Phone) — If Equipped Refer to “Uconnect® Phone” for further details.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 information, call the toll-free number 888-539-7474, or visit the Sirius web site at www.siriusxm.com, or at Satellite radio uses direct satellite-to-receiver broadcastwww.siriusxm.ca for Canadian residents. ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Electronic Serial Number/Sirius Identification Radio.
258 UNDERSTANDING YOUR INSTRUMENT PANEL selected. Push the TUNE/SCROLL control knob and the Reception Quality Sirius ID number will display. The Sirius ID number Satellite reception may be interrupted due to one of the display will time out in two minutes. Push any button on following reasons: the radio to exit this screen. • The vehicle is parked in an underground parking Selecting Uconnect® (Satellite) Mode structure or under a physical obstacle. Push the SAT button until #SAT# appears in the display.
UNDERSTANDING YOUR INSTRUMENT PANEL 259 additional three seconds will make the radio display the Song Title all of the time (push and hold again to return Push and release the SEEK buttons to search for the next to normal display). listenable station in AM/FM mode. Push the right switch to seek up and the left switch to seek down. The radio RW/FF will remain tuned to the new station until you make Pushing the RW (Rewind) or FF (Fast Forward) buttons another selection.
260 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button again to select the music SET/RND Button — To Set The Pushbutton Memory type. When you are receiving a station that you wish to By pushing the SEEK button when the Music Type commit to pushbutton memory, push the SET/RND function is active, the radio will be tuned to the next button. The symbol SET 1 will now show in the display window. Select the button (1–6) you wish to lock onto this channel with the same selected Music Type name.
UNDERSTANDING YOUR INSTRUMENT PANEL 261 Every time a preset button is used, a corresponding Uconnect® 130 button number will display. Buttons 1 - 6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations). Uconnect® 730N/430/430N CD/DVD/HDD/NAV — IF EQUIPPED Refer to your Uconnect® Supplement Manual for detailed operating instructions. Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” for further details.
262 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Radio Mode SEEK Buttons NOTE: The ignition switch must be in the ON or ACC Push and release the SEEK buttons to search for the next listenable station in AM/FM mode. Push the right switch position to operate the radio. to seek up and the left switch to seek down. The radio Power Switch/Volume Control (Rotary) will remain tuned to the new station until you make Push the ON/VOLUME control knob to turn on the another selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 263 3. After adjusting the hours, push the right side TUNE/ Setting The Tone, Balance And Fade SCROLL control knob to set the minutes. The minutes Push the rotary TUNE/SCROLL control knob and BASS will begin to blink. will display. Turn the TUNE/SCROLL control knob to 4. Adjust the minutes using the right side TUNE/ the right or left to increase or decrease the bass tones. SCROLL control knob.
264 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by repeating the above procedure with this exception: Push the SET/RND button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM Push the rotary TUNE/SCROLL control knob again to and 12 FM stations to be stored into pushbutton memory. exit setting tone, balance, and fade.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC position seconds. Play will begin at the start of track 1. to operate the radio.
266 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! (Continued) • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player. EJECT Button — Ejecting A CD Push the EJECT button to eject the CD. SEEK Button Push the right SEEK button for the next selection on the CD.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 AM/FM Button Supported Media (Disc Types) Push the button to select either AM or FM mode. The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Push this button while the CD is playing to activate Random Play.
268 UNDERSTANDING YOUR INSTRUMENT PANEL display the file name and folder name, and will assign a number instead. With a maximum number of files, exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.) Maximum number of characters in file/folder names: Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 Playback Of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium.
270 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions — Auxiliary Mode Uconnect® 130 WITH SATELLITE RADIO The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or iPod®, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pushing the DISC/AUX button will change the mode to auxiliary device if the AUX jack is connected.
UNDERSTANDING YOUR INSTRUMENT PANEL 271 Operating Instructions — Radio Mode SEEK Buttons NOTE: The ignition switch must be in the ON or ACC Push and release the SEEK buttons to search for the next listenable station in AM/FM mode. Push the right switch position to operate the radio. to seek up and the left switch to seek down. The radio Power Switch/Volume Control (Rotary) will remain tuned to the new station until you make Push the ON/VOLUME control knob to turn on the another selection.
272 UNDERSTANDING YOUR INSTRUMENT PANEL If your vehicle is not equipped with or this feature is not Clock Setting Procedure available on your vehicle, a “Not Equipped With 1. Push and hold the TIME button until the hours blink. Uconnect Phone” message will display on the radio 2. Adjust the hours by turning the right side TUNE/ screen. SCROLL control knob. Phone Button Uconnect® Phone — If Equipped Push this button to operate the Uconnect® Phone feature 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 starting at step 2. For vehicles not equipped with satellite Setting The Tone, Balance And Fade radio, push the SETUP button and then follow the above Push the rotary TUNE/SCROLL control knob and BASS procedure, starting at step 2. will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the bass tones.
274 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a fifth time Toggle the MUSIC TYPE button to select the following and FADE will display. Turn the TUNE/SCROLL control format types: knob to the left or right to adjust the sound level between 16-Digit Character the front and rear speakers. Program Type Display Push the rotary TUNE/SCROLL control knob again to No program type or None exit setting tone, balance, and fade.
UNDERSTANDING YOUR INSTRUMENT PANEL 275 Program Type Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather 16-Digit Character Display Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R&B Sports Talk Top 40 Weather By pushing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name.
276 UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM Button Push the button to select either AM or FM mode. SET/RND Button — To Set The Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, push the SET/RND button. The symbol SET 1 will now show in the display window. Select the button (1–6) you wish to lock onto this station and push and release that button.
UNDERSTANDING YOUR INSTRUMENT PANEL 277 If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC position seconds. Play will begin at the start of track 1. to operate the radio.
278 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! (Continued) • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player. EJECT Button — Ejecting A CD Push the EJECT button to eject the CD. SEEK Button Push the right SEEK button for the next selection on the CD.
UNDERSTANDING YOUR INSTRUMENT PANEL 279 AM/FM Button Supported Media (Disc Types) Push the button to select either AM or FM mode. The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Push this button while the CD is playing to activate Random Play.
280 UNDERSTANDING YOUR INSTRUMENT PANEL display the file name and folder name, and will assign a number instead. With a maximum number of files, exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.) Maximum number of characters in file/folder names: Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems.
UNDERSTANDING YOUR INSTRUMENT PANEL 281 MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 Playback Of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium.
282 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button — CD Mode For MP3 Play Pushing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pushing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 283 service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a welPush this button to change the display to time of day. come kit that contains general information, including The time of day will display for five seconds (when the how to setup your on-line listening account. For further ignition is OFF).
284 UNDERSTANDING YOUR INSTRUMENT PANEL placed within the line of sight of the antenna will cause decreased performance. Larger luggage items such as ESN/SID Access bikes should be placed as far rearward as possible, within With the ignition switch in the ON/RUN or ACC posi- the loading design of the rack. Do not place items directly tion and the radio on, push the SETUP button and scroll on or above the antenna. using the TUNE/SCROLL control knob until Sirius ID is Reception Quality selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 285 Operating Instructions — Uconnect® (Satellite) Mode INFO Button NOTE: The ignition switch must be in the ON/RUN or Pushing the INFO button will cycle the display information between Artist, Song Title, and Composer (if availACC position to operate the radio. able).
286 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button SETUP Button Pushing this button once will turn on the Music Type Pushing the SETUP button allows you to select the mode for five seconds. Pushing the MUSIC TYPE button following items: or turning the TUNE/SCROLL control knob within five • Display Sirius ID number — Push the AUDIO/ seconds will allow the program format type to be seSELECT button to display the Sirius ID number. This lected.
UNDERSTANDING YOUR INSTRUMENT PANEL 287 You may add a second channel to each pushbutton by repeating the above procedure with this exception: Push the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory. The channels stored in SET 2 memory can be selected by pushing the pushbutton twice.
288 UNDERSTANDING YOUR INSTRUMENT PANEL Once the audio device is connected and synchronized to Use the connection cable to connect an iPod® or external the vehicle’s iPod®/USB/MP3 control system (iPod® or USB device to the vehicle’s USB/AUX connector port external USB device may take a few minutes to connect), the audio device starts charging and is ready for use by which is located in the center console or glove compartpressing radio switches, as described below. ment.
UNDERSTANDING YOUR INSTRUMENT PANEL 289 • The audio device can be controlled using the radio Play Mode buttons to Play, Browse, and List the iPod® contents. When switched to iPod®/USB/MP3 control mode, the • The audio device battery charges when plugged into iPod® or external USB device automatically starts Play the USB/AUX connector (if supported by the specific mode. In Play mode, the following buttons on the radio faceplate may be used to control the iPod® or external audio device).
290 UNDERSTANDING YOUR INSTRUMENT PANEL • Jump backward in the current track by pushing and holding the << RW button. Holding the << RW button long enough will jump to the beginning of the current track. for that track. Pushing the INFO button again jumps to the next screen of data for that track. Once all screens have been viewed, the last INFO button push will go back to the play mode screen on the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 291 • RND button (available on sales code RES radio only): • Turning it clockwise (forward) and counterclockwise (backward) scrolls through the lists, displaying the Pushing this button toggles between Shuffle ON and track detail on the radio display.
292 UNDERSTANDING YOUR INSTRUMENT PANEL In List mode, the radio PRESET buttons are used as LIST button: The LIST button will display the top level shortcuts to the following lists on the iPod® or external menu of the iPod® or external USB device. USB device: • Turn the TUNE control knob to list the top-menu item to be selected and push the TUNE control knob.
UNDERSTANDING YOUR INSTRUMENT PANEL 293 CAUTION! (Continued) • Placing items on the iPod® or external USB device, or connections to the iPod® or external USB device in the vehicle, can cause damage to the device and/or to the connectors. WARNING! Do not plug in or remove the iPod® or external USB device while driving. Failure to follow this warning could result in an accident.
294 UNDERSTANDING YOUR INSTRUMENT PANEL Next Track STEERING WHEEL AUDIO CONTROLS Use the SEEK UP button, or push the VR button on the The remote sound system controls are located on the rear radio and say “Next Track,” to jump to the next music surface of the steering wheel. Reach behind the wheel to track on your cellular phone. access the switches.
UNDERSTANDING YOUR INSTRUMENT PANEL 295 The right-hand control is a rocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume, and pressing the bottom of the rocker switch will decrease the volume. The button located in the center of the left-hand control will tune to the next preset station that you have programmed in the radio preset button.
296 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particular disc, it may be damaged (e.g., scratched, reflective coatTo keep a CD/DVD in good condition, take the following ing removed, a hair, moisture or dew on the disc) precautions: oversized, or have protection encoding. Try a known 1. Handle the disc by its edge; avoid touching the surface. good disc before considering disc player service. CD/DVD DISC MAINTENANCE 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 297 CLIMATE CONTROLS The air conditioning and heating system is designed to make you comfortable in all types of weather. Manual Heating And Air Conditioning Blower Control Rotate this control to regulate the amount of air forced through the ventilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position. There are seven blower speeds.
298 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If your air conditioning performance seems lower than expected, check the front of the A/C condenser located in front of the radiator for an accumulation of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front fascia protectors may reduce airflow to the condenser, reducing air conditioning performance.
UNDERSTANDING YOUR INSTRUMENT PANEL 299 • Panel • Floor Air is directed through the outlets in the instruAir is directed through the floor outlets with a ment panel. These outlets can be adjusted to direct small amount flowing through the defrost and airflow. side window demist outlets. NOTE: The center instrument panel outlets can be aimed • Mix so that they are directed toward the rear seat passengers Air is directed through the floor, defrost, and side for maximum airflow to the rear.
300 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: NOTE: • The air conditioning compressor operates in Mix, • Continuous use of the Recirculation mode may make Defrost, or a blend of these modes, even if the Air the inside air stuffy and window fogging may occur. Conditioning (A/C) button is not pushed. This dehuExtended use of this mode is not recommended. midifies the air to help dry the windshield.
UNDERSTANDING YOUR INSTRUMENT PANEL 301 Automatic Temperature Control (ATC) — If Equipped Automatic Operation Operation of the system is quite simple. The Automatic Temperature Control system automati- 1. Turn the Mode Control knob (right knob) and the cally maintains the climate in the cabin of the vehicle at Blower Control knob (left knob) to AUTO. the comfort levels desired by the driver and passenger. NOTE: The AUTO position performs best for front seat occupants only. 2.
302 UNDERSTANDING YOUR INSTRUMENT PANEL The recommended setting for maximum comfort for the Blower Control average person is 72°F (22°C); however, this may vary. For full automatic operation or for NOTE: automatic blower operation, turn the blower knob to the AUTO position. In • The temperature setting can be adjusted at anytime manual mode there are seven blower without affecting automatic operation. speeds that can be individual selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 303 4
304 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can override the AUTO mode setting to • Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and • Panel side window demist outlets. Air is directed through the outlets in the instru- • Mix ment panel. These outlets can be adjusted to direct Air is directed through the floor, defrost, and side airflow.
UNDERSTANDING YOUR INSTRUMENT PANEL 305 • Air Conditioner Control NOTE: Push this button to turn on the air • When the ignition switch is turned to the LOCK conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is • In cold weather, use of the Recirculation mode may turned on, cool dehumidified air will lead to excessive window fogging.
306 UNDERSTANDING YOUR INSTRUMENT PANEL • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pushing the Recirculation button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pushed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation Mode at this time.
UNDERSTANDING YOUR INSTRUMENT PANEL 307 windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Use of the air Recirculation Mode during winter months is Vehicle windows tend to fog on the inside in mild but not recommended because it may cause window fogging. rainy or humid weather. Vacation Storage NOTE: Recirculate without A/C should not be used for Anytime you store your vehicle, or keep it out of service long periods as fogging may occur. (i.e.
308 UNDERSTANDING YOUR INSTRUMENT PANEL Outside Air Intake A/C Air Filter — If Equipped Make sure the air intake, located directly in front of the windshield, is free of obstructions such as leaves. Leaves collected in the air intake may reduce airflow, and if they enter the plenum, they could plug the water drains. In winter months, make sure the air intake is clear of ice, slush, and snow. The A/C Filter prevents most dust and pollen from entering the cabin.
UNDERSTANDING YOUR INSTRUMENT PANEL 309 Control Setting Suggestions For Various Weather Conditions 4
STARTING AND OPERATING CONTENTS ! STARTING PROCEDURES . . . . . . . . . . . . . . . .316 ▫ Five-Speed Manual Transmission. . . . . . . . . . .319 ▫ Manual Transmission — If Equipped . . . . . . .316 ▫ Recommended Shift Speeds . . . . . . . . . . . . . .321 ▫ Automatic Transmission — If Equipped . . . . .317 ▫ Downshifting . . . . . . . . . . . . . . . . . . . . . . . .322 ▫ Normal Starting. . . . . . . . . . . . . . . . . . . . . . .317 ! AUTOMATIC TRANSMISSION — IF EQUIPPED . . . . . . . . . . . . .
312 STARTING AND OPERATING ! AUTOSTICK® (SIX-SPEED AUTOMATIC TRANSMISSION) . . . . . . . . . . . . . . . . . . . . . .337 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .337 ▫ AutoStick® (CVT) . . . . . . . . . . . . . . . . . . . . .339 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .339 ▫ After Driving Off-Road . . . . . . . . . . . . . . . . .350 ! POWER STEERING . . . . . . . . . . . . . . . . . . . . .351 ▫ Power Steering Fluid Check . . . . . . . . . . . . . .
STARTING AND OPERATING 313 ▫ ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light . . . . . . . . . . . .368 ▫ Summer Or Three Season Tires — If Equipped. . . . . . . . . . . . . . . . . . . . . . . . . .384 ! TIRE SAFETY INFORMATION . . . . . . . . . . . . .369 ▫ Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . .385 ▫ Tire Markings . . . . . . . . . . . . . . . . . . . . . . . .369 ▫ Spare Tire Matching Original Equipped Tire And Wheel — If Equipped . . . . . . . . . . .
314 STARTING AND OPERATING ! TIRE ROTATION RECOMMENDATIONS . . . . .392 ▫ Fuel System Cautions. . . . . . . . . . . . . . . . . . .406 ! TIRE PRESSURE MONITORING SYSTEM (TPMS) . . . . . . . . . . . . . . . . . . . . . . .393 ▫ Carbon Monoxide Warnings . . . . . . . . . . . . .407 ▫ Base System . . . . . . . . . . . . . . . . . . . . . . . . .396 ▫ Premium System — If Equipped . . . . . . . . . . .398 ▫ General Information . . . . . . . . . . . . . . . . . . .402 ! FUEL REQUIREMENTS . . . . . . . . . .
STARTING AND OPERATING 315 ▫ Towing Requirements . . . . . . . . . . . . . . . . . .418 ! RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) . . . . . . . . . . . .425 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . .423 ▫ Towing This Vehicle Behind Another Vehicle . . .
316 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. WARNING! • Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the Key Fob from the ignition. When leaving the vehicle, always lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
STARTING AND OPERATING 317 Automatic Transmission — If Equipped Normal Starting The shift lever must be in the PARK or NEUTRAL Normal starting of either a cold or a warm engine does position before you can start the engine. Depress the not require pumping or pressing the accelerator pedal. brake pedal before shifting to any driving gear. Simply turn the ignition switch to the START position and release when the engine starts.
318 STARTING AND OPERATING WARNING! (Continued) another vehicle. This type of start can be dangerous if done improperly, so follow the procedure carefully. Refer to “Jump Starting” in “What To Do In Emergencies” for further information. Extreme Cold Weather (Below –20°F Or −29°C) To ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (available from your authorized dealer) is recommended.
STARTING AND OPERATING 319 ENGINE BLOCK HEATER — IF EQUIPPED MANUAL TRANSMISSION — IF EQUIPPED The engine block heater warms the engine, and permits Five-Speed Manual Transmission quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a WARNING! grounded, three-wire extension cord.
320 STARTING AND OPERATING CAUTION! • Launching in any gear except 1st gear will result in excessive slipping of the clutch and potentially lugging or stalling the engine. • Use each gear in numerical order, do not skip a gear. Be sure the transmission is in first gear, (not third), when starting from a standing position. Damage to the clutch can result from starting in a gear higher than first gear. Shift Pattern For most city driving, you will find it easier to use only the lower gears.
STARTING AND OPERATING 321 Never shift into REVERSE until the vehicle has come to a Recommended Shift Speeds complete stop. To use your manual transmission for optimal fuel NOTE: During cold weather, until the transmission lubri- economy, it should be upshifted as listed in the following cant is warm, you may experience slightly higher shift table. efforts. This is normal and not harmful to the transmission.
322 STARTING AND OPERATING Downshifting AUTOMATIC TRANSMISSION — IF EQUIPPED Proper downshifting will improve fuel economy and prolong engine life. CAUTION! If you skip a gear while downshifting or downshift at too high of a vehicle speed, these conditions may cause the engine to overspeed if too low of a gear is selected and the clutch pedal is released.
STARTING AND OPERATING 323 WARNING! WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and your foot is firmly pressing the brake pedal.
324 STARTING AND OPERATING out of PARK, the ignition switch must be turned to the ON/RUN position (engine running or not) and the brake This vehicle is equipped with a Key Ignition Park Interpedal must be pressed. lock which requires the transmission to be in PARK before the ignition switch can be turned to the LOCK/ Six-Speed Automatic Transmission — If Equipped OFF (key removal) position.
STARTING AND OPERATING 325 Only shift from DRIVE to PARK or REVERSE when the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when shifting between these gears. PARK (P) This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while the vehicle is in The transmission shift lever has only PARK, REVERSE, motion.
326 STARTING AND OPERATING WARNING! WARNING! (Continued) • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Your vehicle could move and injure you and others if it is not in PARK. Check by trying to move the shift lever out of PARK with the brake pedal released. Make sure the transmission is in PARK before leaving the vehicle.
STARTING AND OPERATING 327 WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever. • Do not leave the ignition key in or near the vehicle (or in a location accessible to children).
328 STARTING AND OPERATING The following indicators should be used to ensure that you NEUTRAL (N) have engaged the transmission into the PARK position: Use this range when the vehicle is standing for prolonged • When shifting into PARK, firmly move the shift lever periods with the engine running. The engine may be all the way forward and to the left until it stops and is started in this range. Apply the parking brake and shift the transmission into PARK if you must leave the vehicle. fully seated.
STARTING AND OPERATING 329 CAUTION! (Continued) severe transmission damage. Refer to “Recreational Towing” in “Starting And Operating” and “Towing A Disabled Vehicle” in “What To Do In Emergencies” for further information. DRIVE (D) This range should be used for most city and highway driving. It provides the smoothest upshifts and downshifts, and the best fuel economy.
330 STARTING AND OPERATING During very cold temperatures (-4°F [-20°C] or below), transmission operation may be modified depending on engine and transmission temperature as well as vehicle speed. Normal operation will resume once the transmission temperature has risen to a suitable level. Transmission Limp Home Mode Transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home Mode is activated.
STARTING AND OPERATING 331 If the transmission cannot be reset, authorized dealer Torque Converter Clutch service is required. A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. Overdrive Operation A clutch within the torque converter engages automatiThe automatic transmission includes an electronically cally at calibrated speeds. This may result in a slightly controlled Overdrive (sixth gear).
332 STARTING AND OPERATING Continuously Variable Automatic Transmission (CVT) — If Equipped The transmission gear position display (located in the instrument cluster) indicates the transmission gear range. You must press the brake pedal to move the shift lever out of PARK (refer to “Brake/Transmission Shift Interlock System” in this section). To drive, move the shift lever from PARK or NEUTRAL to the DRIVE position. The transmission shift lever has PARK, REVERSE, NEUTRAL, and DRIVE shift positions.
STARTING AND OPERATING 333 PARK (P) This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a level surface, you may shift the transmission into PARK first, and then apply the parking brake.
334 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, turn the engine OFF, and remove the ignition key. Once the key is removed, the transmission is locked in PARK, securing the vehicle against unwanted movement.
STARTING AND OPERATING 335 CAUTION! • Look at the transmission gear position display and verify that it indicates the PARK position. • Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain.
336 STARTING AND OPERATING WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can cause severe transmission damage.
STARTING AND OPERATING 337 During sustained high speed driving or trailer towing up long grades on hot days, the automatic transmission oil may become too hot. If this happens, the transmission overheat indicator light will come on, and the vehicle will slow slightly until the transmission cools down enough to allow a return to the requested speed. This is done to prevent transmission damage due to overheating. If the high speed is maintained, the overheating may reoccur, as before, in a cyclic fashion.
338 STARTING AND OPERATING downshift the transmission to the next lower gear, while • The transmission will automatically downshift to first using (+) to enter AutoStick® mode will retain the gear when coming to a stop. After a stop, the driver current gear. When AutoStick® is active, the current should manually upshift (+) the transmission as the transmission gear is displayed in the instrument cluster. vehicle is accelerated.
STARTING AND OPERATING 339 To disengage AutoStick® mode, hold the shift lever to the right (+) until “D” is once again displayed in the instrument cluster. You can shift in or out of the AutoStick® mode at any time without taking your foot off the accelerator pedal. WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury.
340 STARTING AND OPERATING In AutoStick® mode, the transmission will shift up or • Transmission shifting will be more noticeable when down when (+/-) is manually selected by the driver, AutoStick® is engaged. unless an engine lugging or overspeed condition would • Heavy Anti-Lock Brake System (ABS) application will result. It will remain in the selected gear until another disengage AutoStick® mode.
STARTING AND OPERATING 341 Where one or more wheels have wheel spin or if additional traction is needed in sand, deep snow, or loose traction surfaces, activate the “4WD LOCK” switch by This feature provides full time, on-demand, four–wheel pulling up once and releasing. This locks the center drive (4WD). coupling allowing more torque to be sent to the rear wheels. The “4WD Indicator Light” will come on in the cluster. This can be done on the fly, at any vehicle speed.
342 STARTING AND OPERATING ON-ROAD DRIVING TIPS OFF-ROAD DRIVING TIPS Utility vehicles have higher ground clearance and a narrower track to make them capable of performing in a wide variety of off-road applications. Specific design characteristics give them a higher center of gravity than ordinary cars. You will encounter many types of terrain driving offroad. You should be familiar with the terrain and area before proceeding.
STARTING AND OPERATING 343 CAUTION! Never park your vehicle over dry grass or other combustible materials. The heat from your vehicle exhaust system could cause a fire. WARNING! Always wear your seat belt and firmly tie down cargo. Unsecured cargo can become projectiles in an off-road situation. When To Use Low (L Off-Road) With The 4WD Lock Lever Engaged When driving off-road, shift into low (L Off-Road) and activate the 4WD LOCK.
344 STARTING AND OPERATING Snow Mud In heavy snow or for additional control and traction at slower speeds, activate the 4WD LOCK and shift the transaxle to low (L Off-Road) if necessary. Do not shift to a lower gear than necessary to maintain headway. Overrevving the engine can spin the wheels and traction will be lost. If you start to slow to a stop, try turning your steering wheel no more than a 1/4 turn quickly back and forth, while still applying throttle.
STARTING AND OPERATING 345 The key to driving in soft sand is using the appropriate tire pressure, accelerating slowly, avoiding abrupt maneuvers and maintaining the vehicle’s momentum. If you are going to be driving on large soft sandy areas or dunes, reduce your tire pressure to a minimum of 15 psi (103 kPa) to allow for a greater tire surface area. You should use low (L Off-Road) with the 4WD LOCK engaged and ESC turned off.
346 STARTING AND OPERATING What is on top and the other side? Are there ruts, rocks, branches or other obstacles on the path? Can you safely recover the vehicle if something goes wrong? If everything looks good and you feel confident, then you should use low (L Off-Road) with the 4WD LOCK engaged and proceed with caution maintaining your momentum as you climb the hill.
STARTING AND OPERATING 347 Driving Down Hill Driving Across An Incline Before driving down a steep hill you need to determine if it is too steep for a safe descent.
348 STARTING AND OPERATING to REVERSE. Back slowly down the hill allowing engine Driving Through Water and hill descent braking to control the descent and apply Extreme care should be taken crossing any type of water. your brakes if necessary, but do not allow the tires to lock. Water crossings should be avoided if possible, and only be attempted when necessary in a safe responsible manWARNING! ner.
STARTING AND OPERATING 349 bottom of the axle differentials, you should inspect all of be intruding on any wildlife, and you can recover the vehicle if necessary. The key to a safe crossing is the water the vehicle fluids for signs of water ingestion. depth, current and bottom conditions. On soft bottoms, the vehicle will sink in, effectively increasing the water CAUTION! level on the vehicle.
350 STARTING AND OPERATING CAUTION! Muddy waters can reduce the cooling system effectiveness by depositing debris onto the radiator. • Check threaded fasteners for looseness, particularly on the chassis, drivetrain components, steering, and suspension. Retighten them, if required, and torque to the values specified in the Service Manual. • Check for accumulations of plants or brush. These things could be a fire hazard.
STARTING AND OPERATING 351 WARNING! (Continued) not have full braking power when you need it to prevent a collision. If you have been operating your vehicle in dirty conditions, get your brakes checked and cleaned as necessary. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers.
352 STARTING AND OPERATING CAUTION! CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur. Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components. Such damage is not covered by the New Vehicle Limited Warranty.
STARTING AND OPERATING 353 PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave an automatic transmission in PARK, or manual transmission in REVERSE or first gear. The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible. To release the parking brake, pull the lever up slightly, press the center button, then lower the lever completely.
354 STARTING AND OPERATING NOTE: • When the parking brake is applied and the automatic transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • This light only shows that the parking brake is applied. It does not show the degree of brake application.
STARTING AND OPERATING 355 WARNING! (Continued) BRAKE SYSTEM • Always fully apply the parking brake when leaving your vehicle or it may roll and cause damage or injury. Also, be certain to leave an automatic transmission in PARK, a manual transmission in REVERSE or first gear. Failure to do so may cause the vehicle to roll and cause damage or injury. Your vehicle is equipped with power assisted brakes as standard equipment.
356 STARTING AND OPERATING If either of the two hydraulic systems lose normal capability, the remaining system will still function with some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal force required to slow or stop. In addition, if the malfunction is caused by an internal leak, as the brake fluid in the master cylinder drops, the “Brake Warning Light” will light.
STARTING AND OPERATING 357 WARNING! WARNING! (Continued) • Pumping of the anti-lock brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer. Just press firmly on your brake pedal when you need to slow down or stop. • The ABS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
358 STARTING AND OPERATING If the “ABS Warning Light” is on, the brake system should be serviced as soon as possible to restore the benefits of anti-lock brakes. If the “ABS Warning Light” does not come on when the ignition switch is turned to the ON position, have the bulb repaired as soon as possible. ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops.
STARTING AND OPERATING 359 WARNING! The Anti-Lock Brake System (ABS) contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of Anti-Lock braking capability. Installation of such equipment should be performed by qualified professionals. a limited slip differential and controls the wheel spin across a driven axle.
360 STARTING AND OPERATING benefit of the system, you must apply continuous braking pressure during the stopping sequence (do not “pump” the brakes). Do not reduce brake pedal pressure unless braking is no longer desired. Once the brake pedal is released, the BAS is deactivated. WARNING! • The Brake Assist System (BAS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions.
STARTING AND OPERATING 361 NOTE: Anytime the ESC system is in the “Full Off” mode, ERM is disabled. Refer to “Electronic Stability Control (ESC)” in this section for a complete explanation of the available ESC modes. WARNING! Many factors, such as vehicle loading, road conditions and driving conditions, influence the chance that wheel lift or rollover may occur. ERM cannot prevent all wheel lift or roll overs, especially those that involve leaving the roadway or striking objects or other vehicles.
362 STARTING AND OPERATING mode. This is done by pressing and holding the “ESC Off” button for five seconds. Refer to “Electronic Stability Control (ESC)” in this section of the manual. WARNING! HDC is only intended to assist the driver in controlling vehicle speed when descending hills. The driver must remain attentive to the driving conditions and is responsible for maintaining a safe vehicle speed.
STARTING AND OPERATING 363 HSA Activation Criteria Disabling/Enabling HSA The following criteria must be met in order for HSA to If you wish to turn on or off the HSA system, it can be activate: done using the Customer Programmable Features in the Electronic Vehicle Information Center (EVIC). Refer to • Vehicle must be stopped. “Electronic Vehicle Information Center (EVIC)” in “Un• Vehicle must be on a 7% (approximate) grade or greater derstanding Your Instrument Panel” for further informahill. tion.
364 STARTING AND OPERATING 5. Release the clutch pedal (if equipped). Electronic Stability Control (ESC) 6. Rotate the steering wheel one-half turn to the left. This system enhances directional control and stability of the vehicle under various driving conditions. ESC corrects for over-steering or under-steering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the over-steering or under-steering condition.
STARTING AND OPERATING 365 WARNING! • The Electronic Stability Control (ESC) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • ESC cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. ESC also cannot prevent collisions resulting from loss of vehicle control due to inappropriate driver input for the conditions.
366 STARTING AND OPERATING the TCS section, has been disabled and the #ESC OFF Indicator Light# will be illuminated. All other stability features of ESC function normally. This mode is intended to be used if the vehicle is in deep snow, sand or gravel conditions and more wheel spin than ESC would normally allow is required to gain traction. To turn ESC on again, momentarily press the “ESC Off” switch. This will restore the normal “ESC On” mode of operation.
STARTING AND OPERATING 367 seconds when the vehicle is stopped and the engine is running. After five seconds, the #ESC OFF Indicator Light# will illuminate and the “ESC OFF” message will appear in the odometer. Press and release the Trip Odometer button located on the instrument cluster to clear this message. To turn ESC on again, momentarily press the “ESC Off” switch. This will restore the “ESC On” mode of operation.
368 STARTING AND OPERATING ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator Light” (located in the instrument cluster) starts to flash as soon as the tires lose traction and the ESC system becomes active. The “ESC Activation/Malfunction Indicator Light” also flashes when TCS is active. If the “ESC Activation/ Malfunction Indicator Light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible.
STARTING AND OPERATING 369 • Each time the ignition is cycled to the ON/RUN TIRE SAFETY INFORMATION position, the ESC system will be ON even if it was Tire Markings cycled off previously, except for when the vehicle is started while in 4L Range. • The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESC becomes inactive following the maneuver that caused the ESC activation.
370 STARTING AND OPERATING • LT (Light Truck) — Metric tire sizing is based on U.S. design standards. The size designation for LT-Metric • P (Passenger) — Metric tire sizing is based on U.S. tires is the same as for P-Metric tires except for the design standards. P-Metric tires have the letter “P” letters “LT” that are molded into the sidewall precedmolded into the sidewall preceding the size designaing the size designation. Example: LT235/85R16. tion. Example: P215/65R15 95H.
STARTING AND OPERATING 371 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or %....blank....% = Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
372 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions – The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
STARTING AND OPERATING 373 Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
374 STARTING AND OPERATING EXAMPLE: DOT MA L9 ABCD 0301 01 = Number representing the year in which the tire was manufactured (two digits) – 01 means the year 2001 – Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured.
STARTING AND OPERATING 375 Term Recommended Cold Tire Inflation Pressure Tire Placard Definition Vehicle manufacturer’s recommended cold tire inflation pressure as shown on the tire placard. A label permanently attached to the vehicle describing the vehicle’s loading capacity, the original equipment tire sizes and the recommended cold tire inflation pressures.
376 STARTING AND OPERATING Tire And Loading Information Placard Example Tire Placard Location (B-Pillar) Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry.
STARTING AND OPERATING 377 To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of 4. Cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or spare tires. XXX kg” on the Tire and Loading Information placard. Loading The combined weight of occupants, cargo/luggage and The vehicle maximum load on the tire must not exceed trailer tongue weight (if applicable) should never exceed the weight referenced here.
378 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
STARTING AND OPERATING 379 5
380 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING 381 WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Economy Under-inflated tires will increase tire rolling resistance resulting in higher fuel consumption. Ride Comfort And Vehicle Stability Proper tire inflation contributes to a comfortable ride. Over-inflation produces a jarring and uncomfortable ride.
382 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
STARTING AND OPERATING 383 speeds, maintaining correct tire inflation pressure is very Radial Ply Tires important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle operaWARNING! tion. Refer to your authorized tire dealer or original equipment vehicle dealer for recommended safe operat- Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle ing speeds, loading and cold tire inflation pressures. poorly.
384 STARTING AND OPERATING Consult an authorized tire dealer for tire repairs and on ice. If your vehicle is equipped with summer tires, be aware these tires are not designed for winter or cold additional information. driving conditions. Install winter tires on your vehicle Damaged Run Flat tires, or Run Flat tires that have when ambient temperatures are less than 40°F (5°C) or if experienced a loss of pressure should be replaced immeroads are covered with ice or snow.
STARTING AND OPERATING 385 While studded tires improve performance on ice, skid Some areas of the country require the use of snow tires and traction capability on wet or dry surfaces may be during the winter. Snow tires can be identified by a poorer than that of non-studded tires. Some states prohibit studded tires; therefore, local laws should be “mountain/snowflake” symbol on the tire sidewall. checked before using these tire types.
386 STARTING AND OPERATING Compact Spare Tire — If Equipped The compact spare is for temporary emergency use only. You can identify if your vehicle is equipped with a compact spare by looking at the spare tire description on the Tire and Loading Information Placard located on the driver’s side door opening or on the sidewall of the tire. Compact spare tire descriptions begin with the letter “T” or “S” preceding the size designation. Example: T145/ 80D18 103M.
STARTING AND OPERATING 387 spare tire needs to be replaced. Since it is not the same as your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity. Limited-Use Spare — If Equipped The limited-use spare tire is for temporary emergency use only. This tire is identified by a label located on the limited-use spare wheel. This label contains the driving limitations for this spare.
388 STARTING AND OPERATING Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, do not Tread wear indicators are in the original equipment tires spin your vehicle’s wheels above 30 mph (48 km/h) or to help you in determining when your tires should be for longer than 30 seconds continuously without stop- replaced. ping. Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information. WARNING! Fast spinning tires can be dangerous.
STARTING AND OPERATING 389 These indicators are molded into the bottom of the tread • Performance tires, tires with a speed rating of V or higher, and summer tires typically have a reduced grooves. They will appear as bands when the tread depth tread life. Rotation of these tires per the vehicle mainbecomes 1/16” (2 mm). When the tread is worn to the tenance schedule is highly recommended. tread wear indicators, the tire should be replaced.
390 STARTING AND OPERATING affect your vehicle’s handling. If you ever replace a The tires on your new vehicle provide a balance of many wheel, make sure that the wheel’s specifications match characteristics. They should be inspected regularly for those of the original wheels. wear and correct cold tire inflation pressures.
STARTING AND OPERATING 391 WARNING! (Continued) CAUTION! braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death. Use only the tire and wheel sizes with load ratings approved for your vehicle. • Never use a tire with a smaller load index or capacity, other than what was originally equipped on your vehicle.
392 STARTING AND OPERATING The suggested rotation method is the “rearward cross” The tires on the front and rear of your vehicle operate at shown in the following diagram. This rotation pattern different loads and perform different steering, driving, does not apply to some directional tires that must not be reversed. and braking functions. For these reasons, they wear at unequal rates. TIRE ROTATION RECOMMENDATIONS These effects can be reduced by timely rotation of tires.
STARTING AND OPERATING 393 The TPMS will warn the driver of a low tire pressure if The Tire Pressure Monitor System (TPMS) will warn the the tire pressure falls below the low-pressure warning driver of a low tire pressure based on the vehicle recom- limit for any reason, including low temperature effects, or natural pressure loss through the tire. mended cold placard pressure. TIRE PRESSURE MONITORING SYSTEM (TPMS) The tire pressure will vary with temperature by about 1 psi (7.0 kPa) for every 12°F (6.
394 STARTING AND OPERATING For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressure to approximately 23 psi (158 kPa). This tire pressure is sufficiently low enough to turn ON the Tire Pressure Monitoring Telltale Light.
STARTING AND OPERATING 395 CAUTION! (Continued) • After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the Tire Pressure Monitoring Sensor. • Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.
396 STARTING AND OPERATING Base System Tire Pressure Monitoring Low Pressure Warnings This is the TPMS warning indicator located in the The Tire Pressure Monitoring Telltale Light will illumiinstrument cluster. nate in the instrument cluster, a LOW TIRE message will be displayed for a minimum of five seconds, and an The TPMS uses wireless technology with wheel rim audible chime will be activated when one or more of the mounted electronic sensors to monitor tire pressure levels.
STARTING AND OPERATING 397 Check TPMS Warnings 5. Using wheels/tires not equipped with TPM sensors. The Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds and remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat providing the system fault still exists. The Tire Pressure Monitoring Telltale Light will turn off when the fault condition no longer exists.
398 STARTING AND OPERATING 4. For each subsequent ignition key cycle, a chime will sound and the Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds and then remain on solid. Premium System — If Equipped The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve 5.
STARTING AND OPERATING 399 • Various Tire Pressure Monitoring System Messages, which display in the Electronic Vehicle Information Center (EVIC) • Tire Pressure Monitoring Telltale Light Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illuminate in the instrument cluster and an audible chime will be activated when one or more of the four active road tire pressures are low.
400 STARTING AND OPERATING the graphic display of the pressure value(s) will stop flashing, and the Tire Pressure Monitoring Light will extinguish once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. Service TPMS Message The Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds, and remain on solid when a system fault is detected. The system fault will also sound a chime.
STARTING AND OPERATING 401 will be displayed instead of dashes. A system fault can pressure values still shown. This indicates that the presoccur with any of the following scenarios: sure values are still being received from the TPM sensors but they may not be located in the correct vehicle 1. Jamming due to electronic devices or driving next to position. The system still needs to be serviced as long as facilities emitting the same radio frequencies as the the #SERVICE TPM SYSTEM# message is displayed.
402 STARTING AND OPERATING warning limit in any of the four active road tires. The 3. However, after driving the vehicle for up to 20 minvehicle may need to be driven for up to 20 minutes utes above 15 mph (24 km/h), the Tire Pressure above 15 mph (24 km/h) in order for the TPMS to Monitoring Telltale Light will flash on and off for receive this information. 75 seconds and then remain on solid.
STARTING AND OPERATING 403 Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the World2.0L And 2.4L Engine wide Fuel Charter, WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, This engine is designed to meet all emis- and durability for your vehicle.
404 STARTING AND OPERATING Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-Flex Fuel Vehicles (FFV) are compatible with gasogenates such as Ethanol. line containing 10% ethanol (E10). Gasoline with higher ethanol content may void the New Vehicle Limited Warranty. CAUTION! DO NOT use gasoline containing Methanol or gasoline containing more than 10% Ethanol.
STARTING AND OPERATING 405 To fix a Non-FFV vehicle inadvertently fueled once with MMT. Gasoline blended with MMT reduces spark plug life and reduces emissions system performance in some E-85 perform the following: vehicles. The manufacturer recommends that gasoline • Drain the fuel tank (see your authorized dealer). without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump, • Change the engine oil and oil filter.
406 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat.
STARTING AND OPERATING 407 Carbon Monoxide Warnings WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
408 STARTING AND OPERATING CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler cap (gas cap). A poorly fitting cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the “Malfunction Indicator Light (MIL)” to turn on. • To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling.
STARTING AND OPERATING 409 WARNING! (Continued) • Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the MIL to turn on. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. • If the gas cap is not tightened properly, the MIL will come on. Be sure the gas cap is tightened every time the vehicle is refueled.
410 STARTING AND OPERATING VEHICLE LOADING The bar code allows a computer scanner to read the Vehicle Identification Number (VIN). As required by National Highway Traffic Safety Administration regulations, your vehicle has a certification label Gross Vehicle Weight Rating (GVWR) affixed to the driver’s side door or B-Pillar. The GVWR is the total allowable weight of your vehicle. Vehicle Certification Label This includes driver, passengers, and cargo.
STARTING AND OPERATING 411 The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for This is the cold tire inflation pressure for your vehicle for operation. Weigh it on a commercial scale to ensure that all loading conditions up to full GAWR. it is not over the GVWR. Curb Weight Overloading can cause potential safety hazards and The curb weight of a vehicle is defined as the total weight shorten useful service life.
412 STARTING AND OPERATING CAUTION! Do not load your vehicle any heavier than the GVWR. If you do, parts on your vehicle can break, or it can change the way your vehicle handles. This could cause you to lose control. Also, overloading can shorten the life of your vehicle. Common Towing Definitions The following trailer towing related definitions will assist you in understanding the following information: Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle.
STARTING AND OPERATING 413 measure GTW is to put your fully loaded trailer on a vehicle scale. The entire weight of the trailer must be supported by the scale. Gross Combination Weight Rating (GCWR) The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR.
414 STARTING AND OPERATING Trailer Sway Control The trailer sway control is a telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling. Weight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle.
STARTING AND OPERATING 415 WARNING! (Continued) • Weight Distributing Systems may not be compatible with Surge Brake Couplers. Consult with your hitch and trailer manufacturer or a reputable Recreational Vehicle dealer for additional information. Trailer Hitch Classification The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
416 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. 22 sq ft (2.04 sq m) 22 sq ft (2.04 sq m) 32 sq ft (3.0 sq m) Maximum GTW (Gross Trailer Wt.) 1,000 lbs (450 kg) 1,000 lbs (450 kg) 2,000 lbs (907 kg) Maximum Tongue Wt. (See Note) 150 lbs (68 kg) 150 lbs (68 kg) 300 lbs (136 kg) 32 sq ft (3.
STARTING AND OPERATING 417 NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to “Tire Safety Information” in “Starting and Operating” for further information. Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
418 STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle. Refer to the “Tire and Loading Information” placard for the maximum combined weight of occupants and cargo for your vehicle.
STARTING AND OPERATING 419 WARNING! WARNING! (Continued) Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision.
420 STARTING AND OPERATING WARNING! (Continued) • Total weight must be distributed between the tow vehicle and the trailer such that the following four ratings are not exceeded: 1. GVWR 2. GTW 3. GAWR 4. Tongue weight rating for the trailer hitch utilized. • Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “Tires – General Information” in “Starting And Operating” for proper tire inflation procedures.
STARTING AND OPERATING 421 Towing Requirements — Trailer Brakes • Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. • An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required.
422 STARTING AND OPERATING Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and sevenpin wiring harness. Use a factory approved trailer harness and connector. NOTE: Do not cut or splice wiring into the vehicles wiring harness.
STARTING AND OPERATING 423 Towing Tips Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from heavy traffic. Manual Transmission — If Equipped If using a manual transmission vehicle for trailer towing, all starts must be in first gear to avoid excessive clutch slippage.
424 STARTING AND OPERATING excessive shifting and heat buildup. This action will also Electronic Speed Control — If Equipped provide better engine braking. • Do not use in hilly terrain or with heavy loads.
STARTING AND OPERATING 425 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.
WHAT TO DO IN EMERGENCIES CONTENTS ! HAZARD WARNING FLASHERS . . . . . . . . . . .429 ▫ Road Tire Installation . . . . . . . . . . . . . . . . . . .440 ! IF YOUR ENGINE OVERHEATS . . . . . . . . . . . .429 ! TIRE SERVICE KIT — IF EQUIPPED . . . . . . . . .442 ! WHEEL AND TIRE TORQUE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . .430 ▫ Torque Specifications . . . . . . . . . . . . . . . . . .430 ! JACKING AND TIRE CHANGING . . . . . . . . . .432 ▫ Jack Location . . . . . . . . . . . . . . . . .
428 WHAT TO DO IN EMERGENCIES ! FREEING A STUCK VEHICLE . . . . . . . . . . . . .457 ! TOWING A DISABLED VEHICLE . . . . . . . . . . .460 ! SHIFT LEVER OVERRIDE . . . . . . . . . . . . . . . .458 ▫ With Ignition Key . . . . . . . . . . . . . . . . . . . . .
WHAT TO DO IN EMERGENCIES 429 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel below the climate controls. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning • On the highways — slow down. flasher.
430 WHAT TO DO IN EMERGENCIES CAUTION! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. Turn off the air conditioning and wait until the pointer drops back into the normal range. If the pointer remains on the H (red) mark for more than a minute, turn the engine off immediately and call for service.
WHAT TO DO IN EMERGENCIES 431 Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Torque Patterns After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated Tighten the lug nuts/bolts in a star pattern until each against the wheel. nut/bolt has been tightened twice.
432 WHAT TO DO IN EMERGENCIES WARNING! WARNING! (Continued) To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
WHAT TO DO IN EMERGENCIES 433 Jack Location Spare Tire Stowage The jack and jack-handle are stowed under the load floor The compact spare tire is stowed under the rear load floor in the cargo area. in the cargo area. Spare Tire Removal Lift up the load floor cover and remove the hold down. Preparations For Jacking 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas.
434 WHAT TO DO IN EMERGENCIES 3. Set the parking brake. 4. Place the shift lever in PARK (automatic transmission) or REVERSE (manual transmission). 5. Turn OFF the ignition. 6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked.
WHAT TO DO IN EMERGENCIES 435 WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway, be extremely careful of motor traffic.
436 WHAT TO DO IN EMERGENCIES NOTE: Refer to “Tires — General Information” in “Starting And Operating” for further information about the spare tire, it’s use, and operation. 1. Remove the scissors jack and lug wrench from the spare wheel as an assembly. Turn the jack screw to the left to loosen the lug wrench and remove the wrench from the jack assembly. NOTE: The jack handle attaches to the side of the jack with two attachment points.
WHAT TO DO IN EMERGENCIES 437 assembly. The rear location is the same but with two rectangular cutouts. For vehicles equipped with plastic trim, the plastic has been cut away to expose the jacking locations in the body. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated.
438 WHAT TO DO IN EMERGENCIES WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. Rear Jacking Location Do not raise the vehicle until you are sure the jack is securely engaged. 3. Turn the jack screw to the left until the jack can be placed under the jacking location.
WHAT TO DO IN EMERGENCIES 439 WARNING! CAUTION! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. WARNING! To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges.
440 WHAT TO DO IN EMERGENCIES 7. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage. Tighten the lug nuts in a star pattern until each lug nut has been tightened twice. Refer to “Torque Specifications” in this section for proper lug nut torque. WARNING! A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle. Have the deflated (flat) tire repaired or replaced immediately. 8.
WHAT TO DO IN EMERGENCIES 441 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 4. Lower the vehicle to the ground by turning the jack handle counterclockwise. Tire And Wheel Cover Or Center Cap 1 — Valve Stem 2 — Valve Notch 3 — Wheel Lug Nut 4 — Wheel Cover 5 — Road Wheel 3.
442 WHAT TO DO IN EMERGENCIES Vehicles Without Wheel Covers 1. Mount the road tire on the axle. 5. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts are properly seated against the wheel. 2. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts. TIRE SERVICE KIT — IF EQUIPPED Small punctures up to ¼” (6 mm) in the tire tread can be WARNING! sealed with Tire Service Kit. Foreign objects (e.g.
WHAT TO DO IN EMERGENCIES 443 Tire Service Kit Components And Operation Using The Mode Select Knob And Hoses Your Tire Service Kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only. Use the Black Air Pump Hose (7) when selecting this mode.
444 WHAT TO DO IN EMERGENCIES Using The Power Button Push and release the Power Button (4) once to turn On the Tire Service Kit. Push and release the Power Button (4) again to turn Off the Tire Service Kit. Using The Deflation Button Press the Deflation Button (2) to reduce the air pressure in the tire if it becomes over-inflated.
WHAT TO DO IN EMERGENCIES 445 from the vehicle or tire and wheel components. Once the sealant dries, it can easily be peeled off and properly discarded. • For optimum performance, make sure the valve stem on the wheel is free of debris before connecting the Tire Service Kit. • You can use the Tire Service Kit air pump to inflate bicycle tires.
446 WHAT TO DO IN EMERGENCIES WARNING! (Continued) WARNING! (Continued) • Keep Tire Service Kit away from open flames or heat source. • A loose Tire Service Kit thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the Tire Service Kit in the place provided. Failure to follow these warnings can result in injuries that are serious or fatal to you, your passengers, and others around you.
WHAT TO DO IN EMERGENCIES 447 on the ground. This will provide the best positioning 4. Remove the cap from the valve stem and then screw the fitting at the end of the Sealant Hose (6) onto the of the kit when injecting the sealant into the deflated valve stem. tire and running the air pump. Move the vehicle as necessary to place the valve stem in this position 5. Uncoil the Power Plug (8) and insert the plug into the before proceeding. vehicle’s 12 Volt power outlet. 3.
448 WHAT TO DO IN EMERGENCIES NOTE: Sealant may leak out through the puncture in the NOTE: If the Mode Select Knob (5) is on Air Mode and tire. the pump is operating, air will dispense from the Air Pump Hose (7) only, not the Sealant Hose (6). If the sealant (white fluid) does not flow within 0 – 10 seconds through the Sealant Hose (6): If the sealant (white fluid) does flow through the 1. Press the Power Button (4) to turn Off the Tire Service Sealant Hose (6): Kit.
WHAT TO DO IN EMERGENCIES 449 3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the Tire Service Kit in the vehicle • The tire is too badly damaged. Do not attempt to drive storage location. Quickly proceed to (D) “Drive Vethe vehicle further. Call for assistance. hicle.
450 WHAT TO DO IN EMERGENCIES (D) Drive Vehicle: (E) After Driving: Immediately after injecting sealant and inflating the tire, Pull over to a safe location. Refer to “Whenever You Stop drive the vehicle 5 miles (8 km) or 10 minutes to ensure to Use Tire Service Kit” before continuing. distribution of the Tire Service Kit Sealant within the tire. 1. Push in the Mode Select Knob (5) and turn to the Air Do not exceed 55 mph (90 km/h). Mode position.
WHAT TO DO IN EMERGENCIES 451 If the tire pressure is 19 psi (1.3 Bar) or higher: 5. Remove the Speed Limit sticker from the instrument panel after the tire has been repaired. 1. Press the Power Button (4) to turn on Tire Service Kit and inflate the tire to the pressure indicated on the tire 6. Replace the Sealant Bottle (1) and Sealant Hose (6) and loading information label on the driver-side door assembly at your authorized dealer as soon as posopening. sible.
452 WHAT TO DO IN EMERGENCIES 4. Clean any remaining sealant from the Tire Service Kit pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully. housing. 5. Position the new Sealant Bottle (1) in the housing so NOTE: When using a portable battery booster pack that the Sealant Hose (6) aligns with the hose slot in follow the manufacturer’s operating instructions and the front of the housing. Press the bottle into the precautions. housing.
WHAT TO DO IN EMERGENCIES 453 Preparations For Jump-Start The battery in your vehicle is located in the front of the engine compartment below the air intake duct. To access the battery remove the air intake duct by turning the two finger screws, located on the radiator support.
454 WHAT TO DO IN EMERGENCIES WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive.
WHAT TO DO IN EMERGENCIES 455 CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. NOTE: Remove Air Intake before proceeding with this Jump-Starting procedure. Connecting The Jumper Cables 1. Connect the positive (+) end of the jumper cable to the positive (+) post of the discharged vehicle. 4.
456 WHAT TO DO IN EMERGENCIES 6. Once the engine is started, remove the jumper cables If frequent jump-starting is required to start your vehicle in the reverse sequence: you should have the battery and charging system inspected at your authorized dealer. Disconnecting The Jumper Cables 1. Disconnect the negative (-) end of the jumper cable from the engine ground of the vehicle with the discharged battery. 2.
WHAT TO DO IN EMERGENCIES 457 FREEING A STUCK VEHICLE CAUTION! (Continued) If your vehicle becomes stuck in mud, sand or snow, it can often be moved using a rocking motion. Turn the steering wheel right and left to clear the area around the front wheels. Then shift back and forth between DRIVE and REVERSE (with automatic transmission) or 2nd gear and REVERSE (with manual transmission), while gently pressing the accelerator.
458 WHAT TO DO IN EMERGENCIES CAUTION! (Continued) SHIFT LEVER OVERRIDE • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h) while in gear (no transmission shifting occurring). If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever: WARNING! 3.
WHAT TO DO IN EMERGENCIES 459 4. Turn the ignition switch to the ACC or ON/RUN position, but do not start the engine. 5. Press and maintain firm pressure on the brake pedal. 6. Insert the screwdriver or similar tool into the access port, and push and hold the override release lever forward. 7. Move the shift lever to the NEUTRAL position. 8. The vehicle may then be started in NEUTRAL. 9. Reinstall the shift lever override access cover.
460 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service.
WHAT TO DO IN EMERGENCIES 461 With Ignition Key Automatic Transmission • Front Wheel Drive (FWD) vehicles can be towed with the front wheels elevated, or on a flatbed truck (all four wheels OFF the ground). • Four-Wheel Drive (4WD) vehicles can be towed on a flatbed truck (all four wheels OFF the ground).
462 WHAT TO DO IN EMERGENCIES Manual Transmission • Front Wheel Drive (FWD) or Four-Wheel Drive (4WD) vehicles can be flat towed (all four wheels on the ground) with the transmission in NEUTRAL. • FWD vehicles can be towed with the front wheels elevated. CAUTION! (Continued) • Towing this vehicle in violation of the above requirements can cause severe engine, transmission, or drivetrain damage. Damage from improper towing is not covered under the New Vehicle Limited Warranty.
WHAT TO DO IN EMERGENCIES 463 CAUTION! • Do not use sling-type equipment when towing. Vehicle damage may occur. • When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK/OFF position. The only approved method of towing without the ignition key is with a flatbed truck.
MAINTAINING YOUR VEHICLE CONTENTS ! ENGINE COMPARTMENT — 2.0L . . . . . . . . . .467 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . .476 ! ENGINE COMPARTMENT — 2.4L . . . . . . . . . .468 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . .476 ! ONBOARD DIAGNOSTIC SYSTEM — OBD II . . .469 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . .477 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . .469 ▫ Air Conditioner Maintenance . . . . . . . . . . . . .
466 MAINTAINING YOUR VEHICLE ▫ Automatic Transmission (Six-Speed) — ! REPLACEMENT BULBS . . . . . . . . . . If Equipped . . . . . . . . . . . . . . . . . . . . . . . . .494 ! BULB REPLACEMENT . . . . . . . . . . ▫ Automatic Transmission (CVT) — ▫ Headlamps . . . . . . . . . . . . . . . . . If Equipped . . . . . . . . . . . . . . . . . . . . . . . . .496 ▫ Fog Lamps . . . . . . . . . . . . . . . . . . ▫ Manual Transmission — If Equipped . . . . . . .
MAINTAINING YOUR VEHICLE 467 ENGINE COMPARTMENT — 2.
468 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 2.
MAINTAINING YOUR VEHICLE 469 ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
470 MAINTAINING YOUR VEHICLE RESET button to turn off the message. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the MIL. Resolving the problem will turn the MIL light off. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS Normally, the OBD II system will be ready.
MAINTAINING YOUR VEHICLE 471 3. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced • The MIL will flash for about 10 seconds and then before going to the I/M station. The I/M station can fail return to being fully illuminated until you turn OFF your vehicle because the MIL is on with the engine the ignition or start the engine.
472 MAINTAINING YOUR VEHICLE available which include detailed service information for MAINTENANCE PROCEDURES your vehicle. Refer to these Service Manuals before The pages that follow contain the required maintenance attempting any procedure yourself. services determined by the engineers who designed your NOTE: Intentional tampering with emissions control vehicle.
MAINTAINING YOUR VEHICLE 473 CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
474 MAINTAINING YOUR VEHICLE CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Also, be sure the oil fill cap is replaced and tightened after adding oil. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “Maintenance Schedule” for further information.
MAINTAINING YOUR VEHICLE 475 CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty. Synthetic Engine Oils You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed.
476 MAINTAINING YOUR VEHICLE station or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your area. Engine Oil Filter The engine oil filter should be replaced with a new filter at every engine oil change. Engine Oil Filter Selection WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.
MAINTAINING YOUR VEHICLE 477 Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic maintenance required. WARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water.
478 MAINTAINING YOUR VEHICLE CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and are identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion.
MAINTAINING YOUR VEHICLE 479 WARNING! (Continued) Refrigerant Recovery And Recycling • The air conditioning system contains refrigerant under high pressure. To avoid risk of personal injury or damage to the system, adding refrigerant or any repair requiring lines to be disconnected should be done by an experienced technician. R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product.
480 MAINTAINING YOUR VEHICLE WARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result. The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following procedure to replace the filter: 1. Open the glove compartment and remove all contents. 2. Push in on the sides of the glove compartment and lower the door. 3. Pivot the glove compartment downward. A/C Air Filter Replacement 5.
MAINTAINING YOUR VEHICLE 481 CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it more often. Particular attention should also be given to hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated.
482 MAINTAINING YOUR VEHICLE Avoid using the wiper blades to remove frost or ice from exceeds the temperature range of your climate. This the windshield. Keep the blade rubber out of contact with rating information can be found on most washer fluid containers. petroleum products such as engine oil, gasoline, etc. NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor performance of blades may be present with chattering, marks, water lines or wet spots.
MAINTAINING YOUR VEHICLE 483 have an authorized technician inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, have the exhaust system inspected each time the vehicle is raised for lubrication or oil change. Replace as required. WARNING! • Exhaust gases can injure or kill.
484 MAINTAINING YOUR VEHICLE CAUTION! (Continued) • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involving engine misfire or other apparent loss of performance, have your vehicle serviced promptly. Continued operation of your vehicle with a severe malfunction could cause the converter to overheat, resulting in possible damage to the converter and vehicle.
MAINTAINING YOUR VEHICLE 485 Coolant Checks Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator.
486 MAINTAINING YOUR VEHICLE Cooling System — Drain, Flush And Refill NOTE: Some vehicles require special tools to add coolant properly. Failure to fill these systems properly could lead to severe internal engine damage. If any coolant is needed to be added to the system please contact your local authorized dealer. If the engine coolant (antifreeze) is dirty or contains visible sediment, have an authorized dealer clean and flush with OAT coolant (antifreeze) (conforming to MS12106).
MAINTAINING YOUR VEHICLE 487 CAUTION! (Continued) • Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the radiator engine coolant and may plug the radiator. • This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended.
488 MAINTAINING YOUR VEHICLE • Use only high purity water such as distilled or deion- • Mixing engine coolant (antifreeze) types is not recomized water when mixing the water/engine coolant mended and can result in cooling system damage. (antifreeze) solution. The use of lower quality water If HOAT and OAT coolant are mixed in an emergency, will reduce the amount of corrosion protection in the have a authorized dealer drain, flush, and refill engine cooling system.
MAINTAINING YOUR VEHICLE 489 WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure. • Do not use a pressure cap other than the one specified for your vehicle.
490 MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for the coolant freeze point or replacing the engine coolant (antifreeze). Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven.
MAINTAINING YOUR VEHICLE 491 • Make sure that the coolant expansion bottle overflow hoses are not kinked or obstructed. WARNING! • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage.
492 MAINTAINING YOUR VEHICLE fluid reservoir. Fluid level can be expected to fall as the Use only manufacturer’s recommended brake fluid. Rebrake pads wear. The brake fluid level should be checked fer to “Fluids, Lubricants, and Genuine Parts” in “Mainwhen the pads are replaced. However, low fluid level taining Your Vehicle” for further information. may be caused by a leak and a checkup may be needed.
MAINTAINING YOUR VEHICLE 493 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point. This may cause it to boil unexpectedly during hard or prolonged braking, resulting in sudden brake failure. This could result in a collision.
494 MAINTAINING YOUR VEHICLE Automatic Transmission (Six-Speed) — If Equipped Selection Of Lubricant (Six-Speed Transmission) It is important to use the proper transmission fluid to ensure optimum transmission performance and life. Use only the manufacturer’s specified transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for fluid specifications. It is important to maintain the transmission fluid at the correct level using the recommended fluid.
MAINTAINING YOUR VEHICLE 495 CAUTION! CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission components. Such damage is not covered by the New Vehicle Limited Warranty. If a transmission fluid leak occurs, visit your authorized dealer immediately. Severe transmission damage may occur. Your authorized dealer has the proper tools to adjust the fluid level accurately.
496 MAINTAINING YOUR VEHICLE Automatic Transmission (CVT) — If Equipped Selection Of Lubricant (CVT) CAUTION! Using a transmission fluid other than the manufacIt is important to use the proper transmission fluid to turer’s recommended fluid may cause belt slip and ensure optimum transmission performance and life.
MAINTAINING YOUR VEHICLE 497 CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission components. Such damage is not covered by the New Vehicle Limited Warranty. Fluid Level Check The fluid level is preset at the factory and does not require adjustment under normal operating conditions. Routine fluid level checks are not required, therefore the transmission filler tube is capped and no dipstick is provided.
498 MAINTAINING YOUR VEHICLE Manual Transmission — If Equipped Lubricant Selection NOTE: If contaminated with water, the fluid should be changed immediately. Rear Drive Assembly (RDA) — AWD/4WD Models Use only the manufacturers recommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in Only “Maintaining Your Vehicle” for further information. Lubricant Selection Use only the manufacturers recommended transmission fluid.
MAINTAINING YOUR VEHICLE 499 Power Transfer Unit (PTU) — AWD/4WD Models Only Appearance Care And Protection From Corrosion Protection Of Body And Paint From Corrosion Lubricant Selection Vehicle body care requirements vary according to geoUse only the manufacturer’s recommended fluid. Refer graphic locations and usage. Chemicals that make roads to “Fluids, Lubricants, and Genuine Parts” in “Maintain- passable in snow and ice and those that are sprayed on ing Your Vehicle” for further information.
500 MAINTAINING YOUR VEHICLE • If insects, tar, or other similar deposits have accumulated on your vehicle, use MOPAR® Super Kleen Bug Corrosion is the result of deterioration or removal of and Tar Remover to remove. paint and protective coatings from your vehicle. • Use a high quality cleaner wax, such as MOPAR® The most common causes are: Cleaner Wax to remove road film, stains and to protect • Road salt, dirt and moisture accumulation. your paint finish. Take care never to scratch the paint.
MAINTAINING YOUR VEHICLE 501 • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well • If you drive on salted or dusty roads or if you drive packaged and sealed. near the ocean, hose off the undercarriage at least once a month. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel.
502 MAINTAINING YOUR VEHICLE NOTE: If your vehicle is equipped with Dark Vapor or Black Satin Chrome wheels DO NOT USE wheel cleaners, abrasives or polishing compounds. They will permanently damage this finish and such damage is not covered by the New Vehicle Limited Warranty. USE ONLY MILD SOAP AND WATER WITH A SOFT CLOTH. Used on a regular basis this is all that is required to maintain this finish. CAUTION! Do not use scouring pads, steel wool, a bristle brush, or metal polishes.
MAINTAINING YOUR VEHICLE 503 Interior Care Use MOPAR® Total Clean to clean fabric upholstery and carpeting. Use MOPAR® Total Clean to clean vinyl upholstery. MOPAR® Total Clean is specifically recommended for leather upholstery. Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth.
504 MAINTAINING YOUR VEHICLE To minimize the possibility of scratching the lenses and When cleaning the rear view mirror, spray cleaner on the reducing light output, avoid wiping with a dry cloth. To towel or rag that you are using. Do not spray cleaner remove road dirt, wash with a mild soap solution fol- directly on the mirror. lowed by rinsing.
MAINTAINING YOUR VEHICLE 505 If the belts need cleaning, use MOPAR® Total Clean, a mild soap solution, or lukewarm water. Do not remove The lenses in front of the instruments in this vehicle are the belts from the vehicle to wash them. Dry with a soft molded in clear plastic. When cleaning the lenses, care cloth. must be taken to avoid scratching the plastic. Replace the belts if they appear frayed or worn or if the 1. Clean with a wet soft rag. A mild soap solution may be buckles do not work properly.
506 MAINTAINING YOUR VEHICLE FUSES WARNING! (Continued) WARNING! • When replacing a blown fuse, always use an appropriate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material. Failure to use proper fuses may result in serious personal injury, fire and/or property damage.
MAINTAINING YOUR VEHICLE 507 Integrated Power Module The Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini-fuses. A label that identifies each component may be printed on the inside of the cover. Refer to “Engine Compartment” in “Maintaining Your Vehicle” for further information.
508 MAINTAINING YOUR VEHICLE Cavity 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Cartridge Fuse Mini-Fuse 10 Amp Red 15 Amp Lt Blue 10 Amp Red 30 Amp Green 30 Amp Green 40 Amp Green 20 Amp Yellow 15 Amp Lt Blue 20 Amp Yellow 20 Amp Yellow 10 Amp Red 40 Amp Green 15 Amp Lt Blue 10 Amp Red Description Ignition Switch/Occupant Classification Module Battery Feed For Power Tech Power Mirror/Steering Control Satellite Radio/Hands-Free Phone Ignition Off Draw Ignition Off Draw Power Seats Power Locks/Interior Lighting
MAINTAINING YOUR VEHICLE 509 Cavity 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Cartridge Fuse 40 Amp Green Mini-Fuse 20 Amp Yellow 15 Amp Lt Blue 10 Amp Red 10 Amp Red 15 Amp Lt Blue 15 Amp Lt Blue 10 Amp Red 15 Amp Lt Blue 10 Amp Red 10 Amp Red 20 Amp Yellow 10 Amp Red Description Auto Shutdown Relay Radio Amplifiers Radio Intrusion Module/Siren – If Equipped Heating, AC/Compass Auto Shutdown Relay Power Sunroof – If Equipped Heated Mirror – If Equipped Auto Shutdown Relay Airbag Control Module Airbag
510 MAINTAINING YOUR VEHICLE Cavity 32 33 34 35 36 Cartridge Fuse 30 Amp Pink Mini-Fuse 10 Amp Red 30 Amp Pink 40 Amp Green 30 Amp Pink Description Auto Shutdown Relay J1962 Conn/Powertrain Control Module Antilock BrakeValve Antilock Brake Pump Headlamp/Washer Control/Smart Glass – If Equipped CAUTION! CAUTION! (Continued) • When installing the IPM cover, it is important to ensure the cover is properly positioned and fully latched.
MAINTAINING YOUR VEHICLE 511 VEHICLE STORAGE REPLACEMENT BULBS If you will not be using your vehicle for more than 21 days, Interior Bulbs you may want to take steps to preserve your battery. • Disengage the mini-fuse in the Power Distribution Center labeled IOD (Ignition Off-Draw). • Or disconnect the negative cable from the battery. Front Header Lamp Center Dome Lamp Rear Cargo Lamp/ Flashlight • Anytime you store your vehicle, or keep it out of service (i.e.
512 MAINTAINING YOUR VEHICLE Premium Front Park Lamp Front Park/Turn Signal Lamp Front Side Marker Lamp Front Fog Lamp Center High Mounted Stop Lamp (CHMSL) Rear Tail/Stop Lamp Rear Turn Lamp Backup Lamp License Lamp Bulb Number 3157K 7444NA 194 H11LL LED Assembly (Serviced at Authorized Dealer) LED Assembly (Serviced at Authorized Dealer) 7440NA (WY21W) Amber 7440 (W21W) Crystal W5W BULB REPLACEMENT NOTE: Lens fogging can occur under certain atmospheric conditions.
MAINTAINING YOUR VEHICLE 513 4. Twist the bulb to the left. 5. Pull bulb outward from assembly. NOTE: These are halogen bulbs. Take care not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life. Fog Lamps 1. Access lamp through the lower fascia cutout. 2. Remove electrical connector from bulb. 3. Remove bulb from housing. Rear Turn Signal And Backup Lamp 1. Remove the two push-pins from the taillamp housing. Taillamp Push-Pins 2.
514 MAINTAINING YOUR VEHICLE License Lamps Center High-Mounted Stoplamp 1. Use a screw driver to gently pry against the side of the This light is an LED assembly. See your authorized dealer for replacement. snap tab to remove the lamp from the liftgate. 2. Rotate the socket 1/4 turn counterclockwise. 3. Pull bulb from socket. FLUID CAPACITIES Fuel (Approximate) Engine Oil with Filter 2.0L and 2.4L Engine (SAE 5W-20, API Certified) Cooling System * 2.0L and 2.
MAINTAINING YOUR VEHICLE 515 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Engine Oil Filter Spark Plugs Fuel Selection Fluid, Lubricant, or Genuine Part We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106.
516 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) • Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze).
MAINTAINING YOUR VEHICLE 517 Chassis Component Automatic Transmission (CVT) — If Equipped Automatic Transmission (Six-Speed) — If Equipped Manual Transmission — If Equipped Rear Drive Assembly (RDA) Power Transfer Unit (PTU) Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part Use only MOPAR® CVTF+4® Continuously Variable Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission.
M A I N T E N A ▫ Maintenance Chart. . . . . . . . . . . . . . . . . . . . .522 N C E MAINTENANCE SCHEDULES CONTENTS ! MAINTENANCE SCHEDULE . . . . . . . . . . . . .
M A I N T E N A N C E S C H E D U L E S 8 520 MAINTENANCE SCHEDULES On Electronic Vehicle Information Center (EVIC) Your vehicle is equipped with an automatic oil change equipped vehicles, “Oil Change Required” will be disindicator system. The oil change indicator system will played in the EVIC and a single chime will sound, indicating that an oil change is necessary. remind you that it is time to take your vehicle in for scheduled maintenance.
MAINTENANCE SCHEDULES 521 M Severe Duty All Models Change Engine Oil at 4000 miles (6,500 km) if the vehicle is operated in a dusty and off road environment. This type of vehicle use is considered Severe Duty.
8 Maintenance Chart Additional Inspections Inspect the CV joints. Inspect front suspension, boot seals. tie rod ends, and replace if necessary. Inspect brake linings, replace if necessary. Check park brake function, adjust if necessary.
Additional Maintenance Replace engine air cleaner filter. Replace air conditioning/cabin air filter. Replace spark plugs** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Replace rear drive assembly (RDA) fluid. Replace power transfer unit (PTU) fluid.
S C H E D U L E S 8 Change automatic transmission fluid and filter if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing. (CVT only) Change the automatic transmission fluid and filter.
30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 2 3 4 5 6 7 8 9 10 11 12 13 14 15 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Or Years: Or Kilometers: 20,000 Mileage or time passed (whichever comes first) 32,000 MAINTENANCE SCHEDULES 525 M Change the manual transmission fluid if using your vehicle for any of the following: trailer towing, heavy loading, taxi,
M 526 MAINTENANCE SCHEDULES A I WARNING! N T E • You can be badly injured working on or around a motor vehicle. Do only service work for which you N A have the knowledge and the right equipment. If N you have any doubt about your ability to perform a C service job, take your vehicle to a competent meE S C H E D U L E S 8 chanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ! SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE . . . . . . . . . . . . . . . . . . .529 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . .531 ▫ Prepare For The Appointment. . . . . . . . . . . . .529 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . .531 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . .529 ! WARRANTY INFORMATION . . . . . . . . . . . . .532 ▫ Be Reasonable With Requests . .
528 IF YOU NEED CONSUMER ASSISTANCE ! PUBLICATION ORDER FORMS . . . . . . . . . . . .534 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . .536 ! DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES . . . . . . . .535 ▫ Temperature Grades. . . . . . . . . . . . . . . . . . . .536 ▫ Treadwear. . . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 529 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment Be Reasonable With Requests If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it is advisable to make these arrangements when you call for an appointment.
530 IF YOU NEED CONSUMER ASSISTANCE facilities, factory-trained technicians, special tools, and • Authorized dealer name the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized dealer service manager first. Most matters can be re- Chrysler Group LLC Customer Center solved with this process. P.O.
IF YOU NEED CONSUMER ASSISTANCE 531 Mexico, D. F. Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered by Bell Canada. For TTY teletypewriter users, dial 711 and for Voice callers, dial 1-800-855-0511 to connect with a Bell Relay Service operator.
532 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract. If you purchased a service contract that is not a manufacturer’s service contract, and you require service after the manufacturer’s New Vehicle Limited Warranty expires, please refer to the contract documents, and contact the person listed in those documents.
IF YOU NEED CONSUMER ASSISTANCE 533 MOPAR® PARTS individual problems between you, your authorized dealer, and the manufacturer. MOPAR® fluids, lubricants, parts, and accessories are available from an authorized dealer. They are recom- To contact NHTSA, you may either call the Auto Safety mended for your vehicle in order to help keep the vehicle Hotline toll free at 1–888–327–4236 (TTY: 1–800–424–9153), or go to http://www.safercar.gov; or write to: Adminoperating at its best.
534 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your payment, please call for an order form. Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations.
IF YOU NEED CONSUMER ASSISTANCE 535 Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1143 (Canada) All passenger car tires must conform to Federal safety requirements in addition to these grades. Treadwear The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For Visit us on the Worldwide Web at: example, a tire graded 150 would wear one and one-half • www.techauthority.
536 IF YOU NEED CONSUMER ASSISTANCE Traction Grades The Traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tire’s ability to stop on wet pavement, as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
INDEX 10
538 INDEX ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . . .356 Adding Engine Coolant (Antifreeze) . . . . . . . . . . . .487 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .407 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . .482 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .405 Air bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Air Bag Advance Front Air Bag . . . . . . . . . . . . . . . . . . . .
INDEX 539 Anti-Lock Brake System (ABS) . . . . . . . . . . . . . . . .356 Anti-Lock Warning Light . . . . . . . . . . . . . . . . . . . .216 Appearance Care . . . . . . . . . . . . . . . . . . . . . . . . .499 Assistance Towing. . . . . . . . . . . . . . . . . . . . . . . . .125 Automatic Dimming Mirror . . . . . . . . . . . . . . . . . .108 Automatic Door Locks . . . . . . . . . . . . . . . . . . . . . .32 Automatic Temperature Control (ATC) . . . . . . . . . .301 Automatic Transaxle . . . . . . . . . . .
540 INDEX Calibration, Compass . . . . . . . . . . . . . . . . . . . . . .239 Camera, Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . .176 Capacities, Antifreeze (Engine Coolant) . . . . . . . . . .514 Capacities, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . .514 Caps, Filler Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .407 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . . . .467 Power Steering . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 541 Older Children And Child Restraints . . . . . . . . . .79 Seating Positions . . . . . . . . . . . . . . . . . . . . . . . .82 Child Safety Locks . . . . . . . . . . . . . . . . . . . . . . . . .34 Clean Air Gasoline . . . . . . . . . . . . . . . . . . . . . . . .403 Cleaning Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .501 Climate Control . . . . . . . . . . . . . . . . . . . . . . . . . .297 Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
542 INDEX Data Recorder, Event . . . . . . . . . . . . . . . . . . . . . . .75 Dealer Service. . . . . . . . . . . . . . . . . . . . . . . . . . . .471 Defroster, Rear Window. . . . . . . . . . . . . . . . . . . . .205 Defroster, Windshield . . . . . . . . . . . . . . . . . . . . . .100 Delay (Intermittent) Wipers . . . . . . . . . . . . . . . . . .169 Diagnostic System, Onboard . . . . . . . . . . . . . . . . .469 Dimmer Switch, Headlight. . . . . . . . . . . . . . . . . . .165 Dipsticks Power Steering .
INDEX 543 Emission Control System Maintenance . . . . . . . . . .470 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .467 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . .476 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . . .319 Break-In Recommendations . . . . . . . . . . . . . . . . .97 Checking Oil Level . . . . . . . . . . . . . . . . . . . . . .473 Coolant (Antifreeze) . . . . . . . . . . . . . . . . . . . . .485 Cooling . . . . . . . . . . . . . .
544 INDEX Automatic Transmission . . . . . . . Cooling System . . . . . . . . . . . . . . Power Steering . . . . . . . . . . . . . . Fluids, Lubricants and Genuine Parts Fog Lights . . . . . . . . . . . . . . . . . . . Folding Rear Seat . . . . . . . . . . . . . . Folding Rear Seat (Sedan) . . . . . . . . Four-Way Hazard Flasher . . . . . . . . Four Wheel Drive . . . . . . . . . . . . . . Systems . . . . . . . . . . . . . . . . . . . Four Wheel Drive Operation . . . . . . Freeing A Stuck Vehicle . . . . .
INDEX 545 Fuel . . . . . . . . . . . . . . . . Odometer . . . . . . . . . . . . Tachometer . . . . . . . . . . . Gear Ranges . . . . . . . . . . . . Gear Select Lever Override . General Information . . . . . . Glass Cleaning . . . . . . . . . . Gross Axle Weight Rating . . Gross Vehicle Weight Rating. GVWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
546 INDEX Instrument Cluster . . . . . . . . . . . . . . . . . . . . . . . .214 Instrument Panel and Controls . . . . . . . . . . . . . . . .212 Instrument Panel Cover . . . . . . . . . . . . . . . . . . . . .504 Instrument Panel Lens Cleaning . . . . . . . . . . . . . . .505 Integrated Power Module (Fuses) . . . . . . . . . . . . . .507 Interior Appearance Care . . . . . . . . . . . . . . . . . . . .503 Intermittent Wipers (Delay Wipers). . . . . . . . . . . . .169 Introduction . . . . . . . . . . . . . .
INDEX 547 Back-Up . . . . . . . . . . . . . . . . Brake Assist Warning . . . . . . Brake Warning . . . . . . . . . . . Bulb Replacement . . . . . . . . . Cargo . . . . . . . . . . . . . . . . . Center Mounted Stop . . . . . . Daytime Running . . . . . . . . . Dimmer Switch, Headlight . . . Engine Temperature Warning . Exterior . . . . . . . . . . . . . . . . Fog . . . . . . . . . . . . . . . . . . . Hazard Warning Flasher . . . . Headlights . . . . . . . . . . . . . . Headlight Switch . . . . . . . . .
548 INDEX Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Power Door . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Lubrication, Body . . . . . . . . . . . . . . . . . . . . . . . . .481 Luggage Rack (Roof Rack) . . . . . . . . . . . . . . . . . . .206 Lug Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .430 Lumbar Support . . . . . . . . . . . . . . . . . . . . . . . . . .154 Maintenance Free Battery. . . . . . . . . . . . . . Maintenance Procedures . .
INDEX 549 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . . . .39 Octane Rating, Gasoline (Fuel) . . . . . . . . . . . . . . . .403 Odometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223 Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221 Oil Change Indicator . . . . . . . . . . . . . . . . . . . . . . .233 Oil Change Indicator, Reset . . . . . . . . . . . . . . . . . .233 Oil, Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
550 INDEX Outlet (Auxiliary Electrical Outlet) . . . . . . . . . . .191 Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .351 Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 Transfer Unit . . . . . . . . . . . . . . . . . . . . . . . . . .499 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Power Steering Fluid . . . . . . . . . . . . . . . . . . . . . . .517 Power Transfer Unit . . . . . . . . . . . . . . . . . . . . . . .
INDEX 551 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . . . . .511 Schedule, Maintenance . . . . . . . . . . . . . . . . . . . . .520 Replacement Keys . . . . . . . . . . . . . . . . . . . . . . . . .16 Seat Belt Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . .471 Adjustable Upper Shoulder Belt Anchorage . . . . . .52 Replacement Tires . . . . . . . . . . . . . . . . . . . . . . . . .390 Automatic Locking Retractor (ALR) . . . . . . . . . . .54 Reporting Safety Defects . . . .
552 INDEX Front Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 Operating Instructions . . . . . . . . . . . . . . . . . . . .45 Pregnant Women . . . . . . . . . . . . . . . . . . . . . . . .54 Pretensioners . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Rear Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Untwisting Procedure . . . . . . . . . . . . . . . . . . . . .51 Seats . . . . . . . . .
INDEX 553 Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .316 Automatic Transmission . . . . . . . . . . . . . . . . . .317 Cold Weather . . . . . . . . . . . . . . . . . . . . . . . . . .318 Engine Fails to Start . . . . . . . . . . . . . . . . . . . . .318 Manual Transmission . . . . . . . . . . . . . . . . . . . .316 Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Starting Procedures . . . . . . . . . . . . . . . . . . . . . . . .316 Steering Power . . . .
554 INDEX Jacking . . . . . . . . . . . . . . . . . . . Life of Tires . . . . . . . . . . . . . . . Load Capacity . . . . . . . . . . . . . Pressure Monitor System (TPMS) Pressure Warning Light . . . . . . . Quality Grading . . . . . . . . . . . . Radial . . . . . . . . . . . . . . . . . . . Replacement . . . . . . . . . . . . . . . Rotation . . . . . . . . . . . . . . . . . . Safety . . . . . . . . . . . . . . . . . . . Sizes . . . . . . . . . . . . . . . . . . . . Snow Tires . . . . . . . . . . . . . . .
INDEX 555 Things You Should Know About Your Transmission Uconnect® Phone . . . . . . . . . . . . . . . . . . . . . . .130 Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . .322 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .494 Uconnect® 130 Operating Instructions Auxiliary Mode . . . . . . . .270 Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .319 Transmitter Battery Service (Remote Keyless Entry) . . .25 Operating Instructions CD Mode . . . . . . . .
556 INDEX Vanity Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . .110 Variance, Compass . . . . . . . . . . . . . . . . . . . . . . . .239 Vehicle Certification Label . . . . . . . . . . . . . . . . . . .410 Vehicle Identification Number (VIN) . . . . . . . . . . . . .7 Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . . . . .377 Vehicle Modifications/Alterations . . . . . . . . . . . . . . .8 Vehicle Security Alarm (Security Alarm) . . . . . . . . . .18 Vehicle Storage . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Chrysler Group LLC 15WK741-126-AA First Edition Printed in U.S.A.
