Operation Manual

2. Remove the hard top. Refer to “Freedom Top™ Three-

Piece Modular Hard Top — Front/Rear Panel Re-

moval” in this section.

3. Remove the soft top bow assembly pivot bracket

screws (two per side) using a #T30 Torx® head driver.

4. Disconnect the knuckles from the left and right metal

pivot brackets. Remove the soft top from the vehicle

and store in a clean, dry location.

NOTE: To aid in disconnecting the knuckles, you may

carefully tap on the knuckles using a rubber mallet.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195