JaxFone Corded Phone Instruction Manual
Dear Valued Customer, Thanks very much for your business! Welcome to use JaxFone products. We hope you're happy with our products as well as our service. If you have any problems (about products, refund or return), please contact us first. We are always here for you and will provide you the satisfactory solutions to let you have a great shopping experience. Welcome To Contact Us Customer Service Email: karenlee0916@yahoo.
FEATURE LIST: - Hands-free Speakerphone with Volume Control - Handset Volume Control - Ringer Volume Control - 10-Two Touch Speed Dial Memories - Last Number Redial - In Use Indicator and Ringer Indicator - Flash Function - Hold on Music Function - Tole/Pulse Dial Mode Selectable - Desktop/Wall Mounting LOCATION OF CONTROLS: 1. AUTO Button 2. STORE Button 4. SP-PHONE Volume 7. SP-PHONE Button 10. HANDSET Volume 3. HOLD Button 5. FLASH Button 8. RINGER Indicator 6. REDIAL Button 9.RINGER Volume 11.
INSTALLATION 1. Connect the coiled cord to handset and the telephone base. 2. Connect the telephone wire to the telephone base and wall jack. Please pick up the handset and you will hear the dial tone, that means the phone is ready for use. If not, please re-connect the phone line and make sure they are inserted in the correct jack. Please Note: This phone is powered by the telephone line. It will work after you complete the above 2 steps. No need any batteries or DC power.
RECEIVING A CALL 1. Pick up the handset or press “SP-PHONE” button when the phone rings. 2. When you finish the phone call, put the handset back on the phone base or press “SP-PHONE” button again. MAKING A CALL 1. Pick up the handset or press “SP-PHONE” button to hear a dialing tone. 2. Dial the number you want to call. 3. Hang up the handset or press “SP-PHONE” button again if you finish the conversation.
state. 2. To continue the phone call, just pick up the handset or press SP-PHONE button once again. TO STORE PHONE NUMBERS FOR SPEED DIAL 1. With the handset off the hook, press STORE button and then enter the phone number you want to store. 2. press STORE button and then press (0-9) button for number location. 3. Replace the handset. When you have finished these steps, this phone number will have been stored. TO SPEED DIAL FROM STORED NUMBER 1. pick up handset (or press SP-PHONE button) 2.
WALL MOUNTABLE When use it as wall-mounted, put the handset aside, slide the adjustable hook upwards to remove it from the slot. Rotate the adjustable hook by 180 degrees, then replace the adjustable hook into the slot until it locks into position. The handset will can stay on the phone base. Remove the filled sponge from the Hanging hole on the bottom of the telephone base. Align the holes with the wall-mounting plate, then slide the telephone base down until it locks securely.
IMPORTANT NOTES Telephone connections The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard EN60950). Following a power cut, the call in progress as well as the date and time settings is lost. Safety precautions - Do not allow the handset to come into contact with liquids or moisture. - Do not open the handset or base unit. This could expose you to high voltages. - There is a slight chance that your product could be damaged by an electrical storm.
