User Manual

If you need any help, please contact us at [e-mail]
INSTALLATION
1. Connect the coiled cord to handset and the telephone base.
2. Connect the telephone wire to the telephone base and wall jack.
Please pick up the handset and you will hear the dial tone, that means the
phone is ready for use. If not, please re-connect the phone line and make
sure they are inserted in the correct jack.
Please Note: This phone is powered by the telephone line. It will work
after you complete the above 2 steps. No need any batteries or DC power.
It still works when power outage in the house.
OPERATION
RINGER VOLUME HI/LO SWITCH
To control the volume of the Ringer.
SP-PHONE VOLUME HI/LO SWITCH
To control the volume of the handsfree speakerphone.
HANDSET VOLUME HI/LO SWITCH
To control the volume of the handset.
RINGER INDICATOR
LED will flash when a call comes in.
IN USE INDICATOR
Led will be bright when the phone is in use.