Use and Care Guide

PRODUCT GUIDE
Interior & Exterior Doors (JPG013)

FRAME TWISTS

string to frame, corner
to corner. If there is a
gap between strings
at center point larger


switching strings and

PROPER SHIMMING

frame at top, center,
and bottom. If any
two measurements
differ more than

is over or under

process and measure
height of frame.
LEVEL AND PLUMB
For plumb, place level

or use a plumb bob.
For level, place level

and sill.
SQUARE

top left to bottom
right corner and
from top right to
bottom left corner. If
measurements differ

square.

LEVEL INDICATOR


possible to measure all parts of the door.
Examine the horizontal indicator. If the bubble is centered between the
lines of the indicator, it is level.
If the bubble is not exactly centered, measure how far “out of level” or
“out of plumb” by maneuvering the end of the level until the bubble is







here

installed correctly.

improper installation are usually not covered by the manufacturer’s warranty. For installation instructions, contact us or your supplier.


Note: These instructions do not address inspection for proper “water tightness” or ashing where the product integrates with the structure. A “water
tight” inspection requires removal of the exterior siding and interior trim around the door. Seek professional assistance regarding this issue.