Manual

INSTALLATION INSTRUCTIONS
AuraLast
®
Exterior Door Frame Assembly Instructions
3
Mortise for Hinges
NewDoor
Ifusinganewdoorandhinges,measurefromthetopofthe
jambasillustrated.
Placeahingeonthejambbetweenthemarks.Makesurethe
barrelisoutfarenoughsothatthedoorcanopenwithout
interferingwiththetrim.Markthejambattheedgeofthe
hinge.Measurefromthemarktotheedgeofthejamb.Use
thatmeasurementtomarkfortheremaininghinges. 
Usearouter-or-hammer&chisel(Note:Makesurethechiselis
verysharp)tocreatedthehingemortise.
Routorchiselaroundthehingeoutline.
Routorchiselthehingemortisethesamedepthasthehinge
leafthickness.   
Bevelof
Chisel
Jamb Face DoorEdge
7/8"
6-3/4"
7-5/8"
36"
36-7/8"
66-1/8"
65-1/4"
HingeBarrel
Clearance
Markfor
Measurement
Door
Rough
Wall