Sizing Guide

Architectural Detail Manual
May 2007
JELD-WEN reserves the right to change specifications without notice.
Pa
g
e8-2
PRODUCT SPECIFICATIONS
MATE RIALS
Extruded vinyl profiles comply with the performance requirements of
AAMA 303-97. Colors are White and Desert Sand. Available in the
West and Upper Mid-West.
FRAME
All frames are assembled utilizing fusion-welded technology for
added strength and durability. Frame jamb depth is 4-5/8 “ , and the
exterior wall thickness is 0.080 of an inch. Frames come standard with
integral nailing fin that can be easily removed for replacement
purposes. Optional factory applied flush fin is available for some
retrofit applications.
PANEL
Panels are 1-1/2” thick, and are assembled utilizing fusion-welded
technology for added strength and durability. Reinforcement is used
in the operating and stationary panels.
GLAZING
3/4” to 1” insulated glass consists of two lites of glass sealed around
a spacer. All insulating glass units comply with the performance
requirements of the IGCC in accordance with either ASTM E774 or
E2190.
GLAZING OPT IONS
3/4” to 1” insulated glass available in Low-E, LowE 366, clear, tinted,
obscure, or other specialty insulating glass as specified. All glass is
tempered.
WEATHER-STRIPPING
Fin-pile weather-strip is applied along the frame and the interlock.
HARDWARE
Two point locking handle set and sealed, face adjustable bearing
rollers are standard on all patio doors.
INSECT SCREENS
Standard fiberglass charcoal color insect screen in a heavy-duty
aluminum frame to match the color of the unit. Insect screens are
intended to allow air and light in and to keep insects out. They are
not intended to keep anyone or anything from falling through an
open door or window. For safety screens or other security devices
contact your local building supply retailer.
GRILLES
SDL (Simulated Divided Lite) - 7/8“ (23mm), 1-1/8“ (29mm), 1-3/8“
(35mm), or 2-1/8” (58mm) contour grilles surface mounted on the
exterior surfaces of the insulating glass, with shadow bars mounted
between the glass panes suspended within the air cavity.
GBG (Grilles between the Glass) - 5/8” (16mm) flat or 1” (26mm)
contour grilles mounted between the glass panes suspended within
the air cavity and color matched to the extrusion color.
INSTALLATION
Installation per JELD-WEN Installation Method for Vinyl Patio Doors
JII006, and/or JII015. See www .jeld-wen.com/resources for
instructions.
PERFORMANCE
NFRC Certified - (rated and labeled in accordance with NFRC)
AAMA/NWDMA I.S.2-97
R20-DP rated standard
Optional C35-DP rated (optional glazing required)
Sliding Patio Doors
Premium Vinyl