Use and Care Guide

Care and Maintenance
Wood Windows and Patio Doors (JCM003)
12/28/182
Materials
• Baby shampoo or mild soap, or vinegar and water.
• Several clean, soft, non-abrasive, absorbent, lint-free dry
cloths(cleaning).
• High quality, non-abrasive car wax (for hardware).
• Appropriate nishing supplies and solvents.
• Commercial glass cleaning products or solvents.
• Non-abrasive paste cleaner and baking soda
(for copper cladding).
• Plastic wrap (for label removal).
• Plenty of rags (for nishing or painting).
• Wood ller.
• High quality sealant (100% polyurethane if painted and
100% silicone if left exposed).
Precautions and Safety
• Some windows have opening control devices installed to help prevent
falls, while allowing full operation when manually released. Know
how to operate these devices before an emergency occurs. See the full
Safety and Operating Instructions at www.jeld-wen.com.
• Window insect screens are not security devices and will not prevent a
child or anyone from falling through.
• Never mix cleaners or solvents. This may be dangerous as well
asineffective.
• Use help when working with a large window sash or patio door panel
to avoid injury.
• Use proper/safe equipment and precautions when cleaning and
servicing the exterior side of windows above groundlevel.
• If using commercial cleaning or nishing products or solvents, carefully
read and follow safety instructions, warnings, cautions and disposal
instructions on manufacturer’s labels. Wear appropriate safety gear (e.g.
clothing, goggles, gloves) and provide plenty ofventilation.
• Immediately clean spills.
• Most solvents are ammable and/or toxic and must be handled with
extreme care. Do not use near open ame, sparks or electricalmotors.
Recommendations
• Do not power-wash windows or use a garden hose; this can cause seal
failure and allow water to enter the structure.
• When cleaning exterior, multi-story windows, begin with the upper
story and work down.
• Avoid using metal tools, razor blades, or other sharp objects and
abrasive cleaners. They can damage window surfaces, scratch glass and
remove glass coatings.
• Do not allow aggressive cleaners to come into contact with metal clad
or wood surfaces. Immediately rinse and dry.
• Do not allow cleaners to puddle or collect at glass edges near
glazingmaterials.
• Avoid cleaning in direct sunlight or in temperatures too hot or toocold.
• Avoid excessive rubbing and over-cleaning.
• Do not scour.
• Clean and rinse one area at a time.
• Clean twice a year (monthly in coastal areas) or when dirty.
• After-market tints and lms are not recommended, as they may cause
damage to the glass and/or sealant.
Tools
• Soft bristle brush
• Spray bottle
• Sponge
• Plastic putty knife (for paint or label removal).
• Metal putty knife or paint scraper.
• Brushes (small and large).
• Wire brush
• Sanding block with medium and ne sandpaper.
• Tack cloth
• Drop cloth
• Thin wire
PRECAUTIONS, SAFETY AND CLEANING RECOMMENDATIONS
NEEDED MATERIALS AND TOOLS