Specification

STATIONARYRIGHT
Multiple Assemblies
W-2500 Clad Sliding patio doors are available in a wide variety of multiple panel configurations from the factory,
all of which are assembled with continuous sills. Mulling of clad sliding patio doors to like products in the field is
not recommended. Instead, individual factory assembled units should be installed in contiguous rough openings,
in order to provide adequate framing support to assure the best performance of the door systems.
Dimensional Doors
W-2500 Clad Sliding patio doors are available in single, twin, and
triple doors. The standard size range includes sizes specifically
designed for replacement of older patio door models in existing
structures, as well as a full range of "true size" products for
architectural consistency.
Operation
W-2500 Clad Sliding patio doors are available in a
full range of operating and stationary styles.
Single panel doors are only available as stationary
(non-venting) styles. Two-panel doors are available with
left or right operation. Three-panel doors are available
with left and right operation and with center or end
operators. Configuration and handing is based on viewing
the door from the exterior.
GENERAL INFORMATION
Architectural Design Manual
November 2017
Product specifications may change without notice.
Questions? Consult JELD-WEN customer service.
W-2500 WOOD
CLAD-WOOD PATIO DOOR
SLIDING PATIO DOOR
Scale: NTS
2