Installation Guide

Barn Door Instructions
(JII114)
© 2016 JELD-WEN, inc. | JELD-WEN and the JW icon are trademarks or registered trademarks of JELD-WEN, inc., Oregon USA.
All other trademarks are the property of their respective owners.
(4/16)
IMPORTANT INFORMATION
MATERIALS AND TOOLS
NEEDED MATERIALS
(1 or 2) Barn Door Kits
Paint/Stain (Optional)
Sand Paper (Optional)
NEEDED TOOLS
Tape measure
Level
Speed Square
Pencil
Stud Finder
(2) Clamps
Cordless Drill
1/8" Drill Bit
1/4" Drill Bit
3/4" Spade Bit
Phillips Head Screwdriver
Crescent Wrench or Socket Set
CONTACT US
For questions, feel free to contact us by phone or email:
Phone: 1-(800)-JELD-WEN/1-(800)-535-3936
Email: customerserviceagents@jeld-wen.com
PRECAUTIONS AND SAFETY
Read and fully understand ALL manufacturer’s instructions before
beginning. Failure to follow proper installation and nishing
instructions may result in the denial of warranty claims for
operational performance problems.
Kit contents are not to be resized, this will result in the denial of
warranty claims.
Do not work alone. Two or more people are required. Use safe
liftingtechniques.
Wear protective gear (e.g. safety glasses, gloves, ear protection, etc.).
Operate hand/power tools safely and follow manufacturer’s
operating instructions.
If disturbing existing paint, take proper precautions if lead paint
is suspected (commonly used before 1979). Your regional EPA
(www.epa.gov/lead) or Consumer Product Safety Commission ofces
provide information regarding regulations and lead protection.
WARNING: Drilling, sawing, sanding or machining wood products
generates wood dust, a substance known to the State of California to
cause cancer. Use a respirator or other safeguards to avoid inhaling
wood dust.
MATERIALS AND DOOR HANDLING
Allow doors to acclimate to local conditions for at least 24 hours
before nishing.
Store door in dry, well-ventilated area.
Do not drag on the oor.
Protect from exposure to direct sunlight during storage.
IF INJURY OCCURS, IMMEDIATELY SEEK MEDICAL ATTENTION!
Visit jeld-wen.com/product-support for installation and nishing
instructions and how-to videos.

Summary of content (27 pages)