Instructions / Assembly

Installation Instructions
for Genius
®
ZigZag1 Retractable Screen System (JII-90043)
6
Remove the magnet strip to expose the Cord Lock Tensioners. Ensuring the screen is fully collapsed, adjust the tension by sliding the top and bottom Cord
Lock Tensioners in even increments until there is slight tension and no slack in the cords (4A & 4B below). Secure the Cord Lock Tensioner using the 2mm
Allen wrench provided. Cut the remaining wrapping and test the operation of the screen. Separate the pleats with your ngers as needed. If necessary,
fully collapse the screen and readjust the tension. Push the magnet strip back in the groove of the Magnet Prole (4C below). Refer to the troubleshooting
guide (page 7) if the operation continues to be unsatisfactory.
4A
4B
Lower
Cord Lock
Tensioner
Upper
Cord Lock
Tensioner
Insert Magnet
Strip into the
Magnet Prole
4C
ADJUST TENSION AND TEST OPERATION
4