Dimensions Guide

Architectural Detail Manual
December 2008
JELD-WEN reserves the right to change specifications without notice.
Pa
g
e6-2
PRODUCT SPECIFICATIONS
MATERIALS
The extruded vinyl profiles comply with the performance
requirements of AAMA 303-97. The colors extend through the profile
of the extrusion with White, Akmond a nd Desert Sand colors
available. The product is not available in the Western United States
markets.
FRAME
All frames and sash are assembled using fusion-welding technology
for added strength and durability. The frame jamb width is 3-1/4 ”
(90.49mm), and the nominal extrusion exterior wall thickness is
0.060“. The wall depth of the double hung product is 1-13/16“. The
frame incorporates an integral nailing fin which can be easily
removed to allow the unit to be used in a replacement window
application. Weep holes are included on the frame to ensure
standing water is directed to the exterior plane of the unit. An
interior and exterior accessory groove is standard to accommodate
various frame accessory and assembly options on the product.
Optional brickmould and snap in flat casing profiles are also
available.
GLAZING
3/4“ (19mm) insulated glass consist of two lites of glass sealed around
a spacer. The glass is mounted into the sash using a silicone-glazing
compound. The insulating glass units comply with the performance
requirements of the IGCC in accordance with either ASTM E774 or
E2190. All units are exterior glazed.
GLAZING OPT IONS
3/4” (19mm) insulated glass is available in clear, Low-E or Low-E 366,
tinted, obscure or other specialty insulating glass as specified. Many
glass options are available in tempered glazings.
GRILLES
GBG (Grilles between the Glass) - 5/8“ (16mm) and 7/8” (22.2mm) flat
or 1“ (26mm) contour grilles mounted between the glass panes
suspended within the air cavity and color matched to the extrusion
color.
EXTENSION JAMBS
Extension jambs are regionally available for JELD-WEN vinyl
products. The 9/16” extension jambs are available in pine clear vinyl
wrapped, primed wood, red oak and maple finishes and can be
specified on three or four sides of the product.
ADDITIONAL ACCESSORIES
Additional accessories are available for JELD-WEN Vinyl products.
Please contact your local building supply retailer for a complete
listing of the additional accessories.
INSTALLATION
Installation per JELD-WEN Installation Method for Vinyl Windows
JII001, JII010 or JII011. See www.jeld-wen.com/resources for
instructions.
PERFORMANCE
NFRC Certified - (rated and labeled in accordance with NF RC)
AAMA/NWDMA I.S.2-97
R20-DP rated
Optional R50 DP ratings are available (East only).
Builders Vinyl
Fixed, Radius and Geometric Windows