Use and Care Guide

Cleaning and lubrication help to maintain and restore smooth operation to movable parts of windows and patio doors and, in most cases, offer corrosion
protection. Always thoroughly clean hardware before lubricating.
Maintain hardware any time windows are not opening or closing
properly or at least biannually (monthly for coastal areas) for
the following:
• Cleandirt/debris
• Tighten loose screws
• Replacedamagedhardware
PRECAUTIONS
The following substances may damage protective hardware nishes. Do
not use:
• Vinegar-based cleaners
• Citrus-based cleaners (lemon, etc.)
• Paint removers
• Windowcleaners
• Brick/sidingwashes
• Any other industrial or abrasive cleaners
Use caution with silicone-based sprays. Apply only in small amounts and
donotoverspray.Wipeoffexcesslubricanttoavoidstainingand/or
damage to other window or patio door parts. Silicone may cause some
hard plastic parts to become brittle.
HARDWARETYPES
Metal hardware offers functionality, aesthetic appeal and resistance to
corrosionbutisnottotallycorrosionproof.Replacecorrodedhardware.
Plastic hardware offers high resistance to the elements; however,
over time, can deteriorate from ultraviolet light, heat, cold and
chemicalexposure.
HARDWARECLEANING
HARDWARELUBRICATION
General Cleaning
1.Removehardwareforeasiercleaning.
2. Use mild soap and water on a soft cloth or sponge; rinse and
wipedry.
Note! For stubborn dirt, use a soft bristle brush to gently scrub.
3.Applyseveralcoatsofhighquality,non-abrasivecarwax.
4.Reinstallhardware.
Heavy Cleaning
Solvents, abrasives, and other cleaners could cause damage to
protective coatings on hardware. If the general cleaning procedure is
not sufcient, call us for recommendations.
HARDWARECLEANINGANDLUBRICATION
Suggested Lubricant Types
Different hardware parts need different types of lubricants.
White or Lithium Grease:
Protects metal surfaces against corrosion, reduces friction and wear
on moving parts, and is an excellent multi-purpose lubricant.
Light Oil (such as 3-in-One
®
):
Useforslidingorrotatingjoints.
Graphite (spray black carbon powder):
Use for door lock key ways and hinges.
Note! Use care when applying graphite to prevent possible
staining of parts.
Spray Silicone:
Useforslidertracks,jamblinersandweatherstrip.
Note! Do not spray directly onto hardware surfaces. Spray onto
clean cloth to apply.
Plastic Hardware
Most hard plastic hardware
parts (e.g. sash retainer latches)
require periodic cleaning for
smooth operation and do not
requirelubrication.
Butt Hinges
Note! Butt hinges are located on
swinging patio doors and some
window styles. Lubricate hinges with
lightoil(3-In-One
®
oil or equivalent)
annually or when noisy.
SliderTracksandJambLiners
Slidertracksorjamblinerscanbecomedirtyanddifculttooperate.
Clean and lubricate as follows:
1.Removesash(es).
2. Vacuum track or wipe with a soft cloth.
3.Applyspraysiliconetodry,softcloth.Wipeontotrack,jambliner
and/orweatherstrip.Donotapplysiliconetopile
(fuzzy) weatherstrip.
4.Reinstallsash(es)andcheckoperation.
...Continued
RetainerLatch
CARE AND MAINTENANCE
Vinyl Windows and Patio Doors (JCM002)
12/17
5