Use and Care Guide

9
FINISHING AND REFINISHING
SELECT MATERIALS AND FINISHING PRODUCTS
This is a guideline for painting and nishing wood surfaces on
windows and patio doors. Consult a paint professional for specic
“how-to” instructions and additional materials.
During manufacturing of primed wood products, a waterborne,
modied acrylic primer is applied for good paint lm adhesion and
some wood protection during shipping, handling and installation.
If storing before installation, place in a dry, well-ventilated,
QSPUFDUFE BSFB %P OPU FYQPTF UP SBJO FYUSFNF IVNJEJUZ BOEPS
IFBU *G åOJTIJOH NPSF UIBO  EBZT BGUFS EFMJWFSZ BGUFS  EBZT
QSJNFST SBQJEMZ MPTF UIF BCJMJUZ PG PQUJNBM BEIFTJPO UP UIF UPQ DPBU
clean with mild soap and water, soft bristle brush, and rinse and
dry thoroughly. Lightly sand the surface and remove all dust with a
vacuum or tack cloth. Apply an additional coat of primer designed
for use with the nal top coat.
FINISHING AURALAST
®
WOOD
AuraLast wood is not nished any differently than any other wood,
XJUI POF FYDFQUJPO +&-%8&/ EPFT OPU SFDPNNFOE UIF VTF PG
water-based dye stains. AuraLast wood is water repellent, and as a
result, the dye cannot penetrate the wood. Water-based pigment
stains, however, will produce acceptable results. AuraLast accepts
any high quality paint.
4QFDJBM/PUFPO7FOFFSFE1BSUT
Many interior surfaces are not solid wood, but covered
XJUIBWFOFFSPSUIJOQJFDFPGXPPE7FOFFSFEQBSUTBSF
engineered for enhanced strength, warp-resistance and
surface consistency when accepting paint or stain. Many times
it will not be obvious if a part is veneered or not. Because of
the delicate nature of veneer, all parts of the wood window
should be treated as though they are veneered. Finishing
WFOFFSFEQSPEVDUTJTUIFTBNFBTåOJTIJOHTPMJEXPPEFYDFQU
it is possible to sand through the veneer. Components receive
a factory nish and should not require further sanding. If light
sanding is necessary, use closed grit 240 or ner.
FINISHING PRODUCTS
5IFSFBSFNBOZEJGGFSFOUPQUJPOTGPSQBJOUJOHPSTUBJOJOH7JTJUB
local paint store for recommendations on types, colors, sheens and
application methods. Many paint stores offer color sample cards you
may take home.
Note! Clear nishes are not recommended for exterior surfaces
because of the need for extensive annual inspections and
maintenance to repair/renish. Clear nish application is at the
owner’s own risk and may result in denial of warranty claims.
Finishing Product Recommendations
Primers:
t 1SJNFSTTFBMXPPETVSGBDFTBOEXJUIPVUUIFNBQBJOUFEXPPE
TVSGBDFNBZMPPLýBUJOQPSPVTBSFBT
t 4PNFQBJOUNBOVGBDUVSFSTPGGFSMPXUFNQFSBUVSFQSJNFSTUIBU
may still be applied below 50°.
t 4FMFDUQSJNFSBQQSPQSJBUFGPSUIFUPQDPBU
Paints:
t 6TFQBJOUEFTJHOFEGPSFYUFSJPSJOUFSJPSBQQMJDBUJPOT
t "WPJEEBSLDPMPSFEQBJOUT5IFZBCTPSCIFBUGSPNUIFTVOBOE
may crack more easily, increasing maintenance.
Stains and clear nishes:
t 4UBJOTBEEBOEFOIBODFDPMPS
t 6TFPOMZTPMJEDPMPSTUBJOTPOFYUFSJPSTVSGBDFTCFDBVTFUIFJS
high concentration of pigments protects wood against sun
damage. The natural wood color and grain is obstructed, but
UIFXPPEUFYUVSFJTSFUBJOFE
t 4FMFDUBDMFBSåOJTIXJUISFTJTUBODFUPXBUFSXFBSIFBU
solvents and chemicals. Without these characteristics, the
nished product may deteriorate, compromising its integrity.
t 6TFBDMFBSUPQDPBUDPOUBJOJOH67BCTPSCFST&YUFSJPSåOJTIJOH
QSPEVDUTQSPWJEFFYUSBQSPUFDUJPOBOEEVSBCJMJUZGPSJOUFSJPS
TVSGBDFTTUJMMFYQPTFEUPTVOMJHIU
8IFOQSFQBSJOHUPåOJTIPSSFåOJTIXPPEQSPEVDUTDPOTJEFSUIFUPPMTBOENBUFSJBMTZPVXJMMOFFEGPSUIFFOUJSFQSPKFDU-JTUFECFMPXBSFTPNF
common painting/nishing product types to consider. Specic tools or materials may vary.
Note! Areas with extreme climates and corrosive environments (coastal and humid areas) require specially designed products that offer extra
protection. Avoid using shellac, lacquer or oil and wiping varnish nishes on exterior surfaces. They do not meet the resistance characteristics
needed for window and patio door products.
1
PREPARE TO FINISH
2
1. Observe weather conditions.
t %POPUBUUFNQUQBJOUJOHåOJTIJOHJOXFUXFBUIFSPSBOZ
FYUSFNFFOWJSPONFOUBMDPOEJUJPOT
t 5IFOPSNBMUFNQFSBUVSFSBOHFSFDPNNFOEFECZQBJOU
manufacturers is 50°-85°. After nish application, the
temperature should not drop below the minimum for at least
four hours. Some products have a wider temperature range.
t 5IFSFMBUJWFIVNJEJUZTIPVMECFCFMPX3FMBUJWFIVNJEJUZ
can be measured with a hygrometer, found at a local hardware
store or home center.
t 1BJOUåOJTIJOBMPDBUJPOUIBUJTXFMMMJUCVUOPUJOEJSFDUTVOMJHIU
and allows plenty of ventilation.
2. Check wood moisture content.
%POPUCFHJOQSPKFDUJGXPPENPJTUVSFDPOUFOUFYDFFET$IFDL
VTJOHBIBOEIFMENPJTUVSFNFUFSTIPVMECFBWBJMBCMFBUMPDBM
IBSEXBSFIPNFJNQSPWFNFOUPSQBJOUTUPSFPSHFOUMZTBOEUIF
TVSGBDFXJUIåOFHSJUTBOEQBQFS'JOFýVGGZPSQPXEFSMJLFEVTU
means the wood is dry, but if the sandpaper lls with wood residue,
the wood is too wet.
1SFQBSFFOPVHINBUFSJBMUPDPNQMFUFUIFQSPKFDU
CARE AND MAINTENANCE
Wood Windows and Patio Doors (JCM003)