Dimensions Guide

Architectural Detail Manual
July 2010
JELD-WEN reserves the right to change specifications without notice.
Pa
g
e2-2
PRODUCT SPECIFI CATIONS
MATERIALS
Extruded vinyl profiles comply with the performance requirements of
AAMA 303-97. Colors are White and Desert Sand. Available in the
West.
FRAME
All frames are assembled utilizing fusion-welded technology for
added strength and durability. Frame jamb depth is 3-1/4”, and the
exterior wall thickness is 0.070 of an inch. Frames come standard with
integral nailing fin that can be easily removed for replacement
purposes.
SASH
Sas h is 2-1 /4” (no m inal ) thick, and is assembl ed uti l izing fusion-welded
technology for addedstrengthanddurability .
GLAZING
3/4” (19mm) insulating glass consists of two lites of glass sealed
around a spacer. All insulating glass units comply with the
performance requireme nts of the IGCC in accordance with either
ASTM E774 or E2190.
GLAZING OPTIONS
3/4” (19mm) insulated glass available in clear, Low-E, tinted, obscure,
or other specialty insulating glass as specified. All glass is available
tempered. Up to 1” insulating available as an option.
WEATHER-STRIPPING
Fin-pile weather -strip applied along full perimeter of operating sash.
Double row of nylon encased closed cell foam weather-stripalong
full perimeter of the frame.
HARDWARE
Awnings utilize scissor hardware with corrosion resistant coating and
two-single actuating handle locks. Color matched lock and operator.
INSECT SCREENS
Optional fiberglass charcoal color insectscreen in an aluminum frame
to match the color of the unit. Insect screens are intended to allow
air and light in and to keep insects out. They are not intended to keep
anyone or anything from falling through an open door or window.
Forsafety screensor other security devices contact your localbuilding
supply retailer.
GRILLES
SDL (S imulated Divided Lite) - 7/8“ (23mm), 1-1/8“ (29mm), 1-3/8“
(35mm), or 2-1/8” (58mm) contour grilles surface mounted on the
exterior surfaces of the insulating glass, with shadow bars mounted
between the glass panes suspended within the air cavity.
GBG (Grilles between the Glass) - 5/8” (16mm) flat or 1” (26mm)
contour grilles mounted between the glass panes suspended within
the air cavity and color matched to the extrusion color.
INSTALLATION
Installation per JELD-WEN Installation Method for Vinyl Windows
JII001, JII010 or JII011. See www.jeld-wen.com/resources for
instructions.
PERFORMANCE
NFRC Certified -(ratedandlabeledinaccordancewithNFRC)
Awning Windows
Premium Vinyl