Instructions / Assembly

Barn Door Instructions
(JII114)
© 2016 JELD-WEN, inc. | JELD-WEN and the JW icon are trademarks or registered trademarks of JELD-WEN, inc., Oregon USA.
All other trademarks are the property of their respective owners.
(1/16)
IMPORTANT INFORMATION
MATERIALS AND TOOLS
NEEDED MATERIALS
• (1 or 2) Barn Door Kits
• Paint/Stain (Optional)
• Sand Paper (Optional)
NEEDED TOOLS
• Tape measure
• Level
• Speed Square
• Pencil
• Stud Finder
• (2) Clamps
• Cordless Drill
• 1/8" Drill Bit
• 1/4" Drill Bit
• 3/4" Spade Bit
• Phillips Head Screwdriver
• Crescent Wrench or Socket Set
CONTACT US
For questions, feel free to contact us by phone or email:
• Phone: 1-(800)-JELD-WEN/1-(800)-535-3936
• Email: [e-mail]
PRECAUTIONS AND SAFETY
• Read and fully understand ALL manufacturer’s instructions before
beginning. Failure to follow proper installation and nishing
instructions may result in the denial of warranty claims for
operational performance problems.
• Do not work alone. Two or more people are required. Use safe
liftingtechniques.
• Wear protective gear (e.g. safety glasses, gloves, ear protection, etc.).
• Operate hand/power tools safely and follow manufacturer’s
operating instructions.
• If disturbing existing paint, take proper precautions if lead paint
is suspected (commonly used before 1979). Your regional EPA
(www.epa.gov/lead) or Consumer Product Safety Commission ofces
provide information regarding regulations and lead protection.
• WARNING: Drilling, sawing, sanding or machining wood products
generates wood dust, a substance known to the State of California to
cause cancer. Use a respirator or other safeguards to avoid inhaling
wood dust.
MATERIALS AND DOOR HANDLING
• Allow doors to acclimate to local conditions for at least 24 hours
before nishing.
• Store door in dry, well-ventilated area.
• Do not drag on the oor.
• Protect from exposure to direct sunlight during storage.
IF INJURY OCCURS, IMMEDIATELY SEEK MEDICAL ATTENTION!