Instructions / Assembly

INSTALLATION INSTRUCTIONS
for Swinging French and Patio Doors (JII105)
7
INSTALL PATIO DOOR - CONTINUED
7
T-ASTRAGAL FLUSH BOLT STRIKE PLATES (FRENCH DOORS ONLY)
To install the T-Astragal
ush bolt strike plates,
follow the instructions
that came with the
product. If they are
missing, complete
the next four steps,
otherwise, skip to
section 8, “INSTALL
SCREEN SYSTEM.”
1. Locate the T-Astragal
attached to the edge
of the inactive door
panel that secures
the panel when the
door is closed. There
are ush bolts at the
top and bottom of
the T-Astragal.
2. With the inactive
door closed, mark
where the ush bolts
touch the head jamb
and sill cap.
Head
Sill
T-Astragal
3. Drill 3/8" holes
(1" deep) at these
spots and apply
the strike plates
(provided) to the sill
cap and head jamb
asshown.
4. With the inactive
door closed, mark
the head jamb
weatherstrip with
a sharp utility knife
at the edge of the
T-Astragal where
it touches the
weatherstrip. Open
the inactive door
and cut through
the weatherstrip
so that when the
door is closed the
weatherstrip clears
theT-Astragal.
Caulk
Cut here
Weatherstrip
T-astragal
Weatherstrip
T-astragal