Instructions / Assembly
2
JELD-WEN DesignGlide Barn Door Hardware System Installation
(JII-90003)
SELECTING THE CORRECT SIZED DOOR FOR THE INSTALLATION
DOOR HEIGHT
The height of the door used with the kit is dependent on the opening
height. Consult Table 1 for common opening sizes. If installing above
thick carpet, be sure to rmly press the tape measure to base of carpet
to obtain the opening height (X).
DOOR WIDTH
The selected door should be no wider than the kit's rail width, but at
least 6" wider than the opening width.
STILE WIDTH
Denition: Stile – a vertical piece in the frame of a paneled door.
To install the included finger pull, it is recommended a door without
stiles is used, or a door with stiles that are at least 4 11/16"
in width, 5" in width if door includes glass panels.
DOOR SPECIFICATIONS
• Door being used for kit must have two top rails.
• Door must weigh less than 120 lbs.
Opening Height (X) Door Height
X ≤ 81 80"
X ≤ 81 1/8" 80 1/8"
X ≤ 81 1/4" 80 1/4"
X ≤ 85" 84"
X ≤ 85 1/8" 84 1/8"
X ≤ 85 1/4" 84 1/4"
X ≤ 97" 96"
X ≤ 97 1/8" 96 1/8"
X ≤ 97 1/4" 96 1/4"
Custom Opening Height = X − 1"
Table 1. Opening Height vs. Door Height
Figure 1. Opening Width and Height
Figure 2. Door Width, Height and Stile Width
Stile
Width
Door
Height
Door
Width
Opening
Height
Opening
Width