Instructions / Assembly

ManualsBrandsJELD-WEN ManualsDoors & Windows72 in. x 80 in. Primed Fiberglass Left-Hand Full-Lite F-2500 2-Panel Folding Patio Door Kit

Assembly and Installation Instructions

for F-2500 Fiberglass Folding Patio Doors (JII-90008)

Please visit jeld-wen.com for warranty

and care and maintenance information.

Thank you for choosing

©2018 JELD-WEN, inc.; This publication and its contents are owned by JELD-WEN, inc. and are protected under the U.S. Copyright Act and other intellectual property laws. All trademarks, service marks, logos

and the like (whether registered or unregistered) are owned or controlled by JELD-WEN, inc. or others. Unauthorized use or duplication of JELD-WEN intellectual property is prohibited.

JELD-WEN reserves the right to change product specications without notice. Please check our website, jeld-wen.com, for current information.

JII-90008 01/19

OPTIONAL HARDWARE INSTALLATION CONTINUED

D-Handle Installation

NOTE: The location of the D-handle is on the exterior and the nal

positioning is at the discretion of the end user. Do not install the D-handle

in a location that impedes the operation of the panel hinges. The

installation steps below provide a suggested location.

1. Align the D-handle with the exterior edge of the panel above the

centerhinge.

2. Mark the location of the D-handle screws and pre-drill using a 5/32"

drillbit.

3. Attach the D-handle with the # 10 x 1 1/2" at head screws.

4. Check for operation.

5. Pre-drill the location of the

screws in the strike plate

using a 1/8" drillbit.

6. Install the strike plate

with the #8 x 1 1/4" at

headscrews.

7. Close the door and check

for operation. Make

adjustments as necessary.

NOTE: The ball catch is adjustable. Rotate the ball catch housing to the

left to raise the ball and to the right to lower the ball.

Ball catch closed Ball catch adjusted

D-Handle

Weatherstrip

Head jamb