Instructions / Assembly

Assembly and Installation Instructions

for F-2500 Fiberglass Folding Patio Doors (JII-90008)

MATERIALS

FRAME COMPONENTS

HARDWARE

HANDLE SET OPTIONAL HARDWARE

#10 x 2 1/2"

(Frame Assembly)

OPTIONAL

#8 x 1 1/4"

(Strike Plate)

#8 x 3/8"

(Cover Plate)

#10 x 1 1/2"

(Hinges/Handle/

D-Handle/Pivot

Hardware)

#6 x 1"

(Pivot Hardware)

Provided Fasteners

• #8 x 3/8" Phillips screws for cover plate.

• #6 x 1" Phillips at head screws for pivot hardware installation.

• #10 x 1 1/2" Phillips at head screws to fasten hinges/handle/D-handle/

pivot hardware to panels.

• #10 x 2 1/2" Phillips at head screws for frame assembly and securing

the door frame (side jambs, head and sill track) into framing. If installing

the sill onto concrete, these screws will need to be replaced with

masonry fasteners. See the Needed Materials section for appropriate

fasteners to use in concrete.

Optional

• #8 x 1 1/4" Phillips at head screw for strike plate.

Hinges

Top Directional Guide Top Directional Guide

Lower Pivot Cover

Directional Carrier Set -

Two Wheel (Left)

Directional Carrier Set -

Two Wheel (Right)

Lower Wall Pivot

Handle Ball Catch Strike Plate D-HandleFinger Pull

Upper Wall Pivot

Head Track Sill Track Seal

Pull Handle

Sill Track Side Jambs Weatherstrip

Box 1

Box 3

Box 2