Instructions / Assembly

07/26/171
Barn Door Installation Instructions
(JII114)
IMPORTANT INFORMATION
MATERIALS AND TOOLS
NEEDED MATERIALS
•(1 or 2) Barn Door Kits
•Paint/Stain (Optional)
•Sand Paper (Optional)
NEEDED TOOLS
•Tape measure
•Level
•Speed Square
•Pencil
•Stud Finder
•(2) Clamps
•Cordless Drill
•1/8" Drill Bit
•1/4" Drill Bit
•3/4" Spade Bit
•Phillips Head Screwdriver
•Crescent Wrench or Socket Set
CONTACT US
For questions, feel free to contact us by phone or email:
•Phone:1-(800)-JELD-WEN/1-(800)-535-3936
•Email:[e-mail]
PRECAUTIONS AND SAFETY
•Read and fully understand ALL manufacturer’s instructions before
beginning.Failuretofollowproperinstallationandnishing
instructions may result in the denial of warranty claims for
operationalperformanceproblems.
•Kit contents are not to be resized, this will result in the denial of
warrantyclaims.
•Donotworkalone.Twoormorepeoplearerequired.Usesafe
liftingtechniques.
•Wearprotectivegear(e.g.safetyglasses,gloves,earprotection,etc.).
•Operate hand/power tools safely and follow manufacturer’s
operatinginstructions.
•Ifdisturbingexistingpaint,takeproperprecautionsifleadpaint
issuspected(commonlyusedbefore1979).YourregionalEPA
(www.epa.gov/lead)orConsumerProductSafetyCommissionofces
provideinformationregardingregulationsandleadprotection.
• WARNING:Drilling,sawing,sandingormachiningwoodproducts
generateswooddust,asubstanceknowntotheStateofCaliforniato
causecancer.Usearespiratororothersafeguardstoavoidinhaling
wooddust.
MATERIALS AND DOOR HANDLING
•Allow doors to acclimate to local conditions for at least 24 hours
beforenishing.
•Storedoorindry,well-ventilatedarea.
•Donotdragontheoor.
•Protectfromexposuretodirectsunlightduringstorage.
IF INJURY OCCURS, IMMEDIATELY SEEK MEDICAL ATTENTION!
Visit jeld-wen.com/product-supportforinstallationandnishing
instructionsandhow-tovideos.