Installation Guide
2
JELD-WEN DesignGlide Barn Door Hardware System Installation
(JII-90003)
SELECTING THE CORRECT SIZED DOOR FOR THE INSTALLATION
Door Height Opening Height - 1"
Figure 2. Opening Width and Height
Figure 1. Left and Right Hand Congurations
Figure 3. Door Width, Height and Stile Width
Stile
Width
Door
Height
Door
Width
Opening
Height
Opening
Width
DOOR SPECIFICATIONS
Solid core doors must have two internal top rails.
Hollow core doors must have one internal top rail.
Door must weigh less than 120 lbs.
DOOR CONFIGURATION
This kit will accommodate a nished opening to the left or a nished
opening to the right of the barn door hardware.
DOOR HEIGHT
The height of the door used with the kit is dependent on the opening
height. Subtract 1" from the opening height to determine the door
height. If installing above thick carpet, be sure to rmly press the tape
measure to base of carpet to obtain the opening height.
Door Width Opening Width + 6"
STILE WIDTH
Denition: Stile – a vertical piece in the frame of a paneled door.
To install the included nger pull, it is recommended a door without
stiles is used, or a door with stiles that are at least 4 11/16"
in width, 5" in width if door includes glass panels.
DOOR WIDTH
The selected door should be no wider than the kit's rail width.
Recommended door width is least 6" wider than the opening width.