Instructions / Assembly

1
Installation Instructions
for Siteline
®
Wood/Clad Wood Double Hung Pocket Windows
(JII-90012)
Thank you for selecting JELD-WEN products. Attached are
JELD-WEN’s recommended installation instructions for Siteline Pocket
(replacement) Double Hung, Picture or Transom Windows designed
to be installed into an existing window frame. Pocket windows
may be installed from either the exterior or interior. Exterior detail
work is needed in both installation types. Not all windows can be
installed into every wall condition in all areas. Consult your local
building department for applicable building codes and regulations
(particularly regarding minimum egress requirements). Local building
code requirements supersede recommended installation instructions.
JELD-WEN does not endorse the installation of our products into a
barrier-type system unless a sill pan is present, incorporated with
through-wall ashing and can drain to the exterior (along with other
“required” components) Failure to do so may result in the denial of
any warranty claims. Areas such as Florida and the Texas TDI region
have different anchoring requirements based on product certication.
For information on specic products, visit www.oridabuilding.org
or www.tdi.texas.gov and follow the anchoring schedule given in
the drawings for the product instead of the anchoring schedule in
thisdocument.
Double Hung
Head Parting Stop
Lower Sash
Upper Sash
Jamb Liner and Filler
Frame
Sill
Not pictured: Double Hung Picture Unit or Transom