Instructions / Assembly

Installation Instructions
for Siteline
®
Wood/Clad Wood Double Hung Pocket Windows (JII-90012)
10
6
ALUMINUM CLAD TRIM APPLICATION - CONTINUED
Trim Application:
1. Start at the bottom of the window. Measure and cut trim for desired t.
NOTE: Trim might need to be notched after cutting to length to
tproperly.
2. To install the aluminum trim, insert the barbed end of the trim into
the accessory groove on the exterior face of the window frame.
Accessory groove
Accessory groove
3. Align the barbed end of trim with the accessory groove in the frame.
Use a small piece of wood and a hammer or a non-marring mallet to
pound the trim into the groove.
(NOTE: If using wood and hammer, rmly lay the wood against the
cladding before using the hammer to avoid damage to the trim).
4. Repeat this process for the remaining two sides and the head
trimpieces.
Accessory
groove
Barb
on trim
Wood
Trim
Trim