Instructions / Assembly

Installation Instructions
for Siteline
®
Wood/Clad Wood Double Hung Pocket Windows (JII-90012)
4
INSPECT PRODUCT
Remove Packaging
Remove packaging materials such as corner covers, shipping blocks
or pads. If there is a protective lm on the glass, DO NOT remove it until
installation and construction are complete.
1
Scan the QR Code for our Measurement Guide for
Siteline
®
Double Hung Pocket Windows (JMI004)
or locate the document in the Product Support section
at jeld-wen.com.
3
REMOVE EXISTING SASH
Original Frame Prep
Installing a Pocket Window from the Exterior:
• Remove or cut the exterior blind
stops at the head and sides, ush
with the jambs.
Head
Remove
trim stops
DO NOT
remove sill stop
Remove old
balance system
Jamb
Remove
blind stops
Head
Installing a Pocket Window from the Interior:
• Remove or cut any interior trim
stops at the head and sides
ush with the jambs. Interior
trim stops may be reused if
notdamaged.
• Remove and dispose/recycle the
existing sash, balance system
(cut balance cords and unscrew
pulleys), head and jamb parting/
trim stops.
• DO NOT remove the interior sill
stop or the exterior blind stops at
the head and side jambs.
Remove old
balance system
Disposal
After removing the old window, contact your local waste management
entities for proper disposal or recycling of products being removed.
• Remove and dispose/recycle the
existing sash, balance system
(cut balance cords and unscrew
pulleys), head and jamb blind/
parting stops.
• DO NOT remove the interior trim
stops or the sill stop.
CONFIRM MEASUREMENTS
2
Inspect Window
• Cosmetic damage and/or shipping damage.
• Included parts.
• Correct product (size, color, grid pattern, glass type, energy-efciency
requirements, etc.).
• Manufacturing abnormalities (e.g., warp, bow, squareness).
If any of the above represents a concern, BEFORE installing, contact your
dealer or distributor for recommendations.