Instructions / Assembly

Installation Instructions

for Premium

™

Vinyl Multi-Slide Atlantic Exterior Pocketing Door Systems (V-4500)

(JII-90004)

Remove Packaging

NOTE: Locate and review individual packaging labels on door panels

prior to removal of any packaging material.

• DO NOT REMOVE – Cardboard or packaging labels from the door

panels. Labels dene the overall conguration and location of each

door panel within the frame.

• Remove shipping material such as cardboard and plastic wrap from

the frame.

• If there is a protective lm on the glass, DO NOT remove until

installation and/or construction is complete.

Inspect Door

• Cosmetic damage.

• Correct product (size, color, grid pattern, handing, glazing, energy-

efciency requirements, etc.).

• Splits, cracks, holes, missing sections or other damage to the nailing n

longer than 6" and/or within 1/2" main door frame.

• If any of the above conditions represent a concern, or if you expect

environmental conditions to exceed the product’s performance

rating, DO NOT install the product. Contact your dealer or distributor

forrecommendations.

Prepare Dap Out Sill Condition

1. Outline where the door sill will sit within the opening. Scribe a line

where the front of the door frame meets the RO.

2. Apply a continuous layer of liquid applied membrane up the side and

back walls of the opening and along the entire width, making sure to

stay behind the line.

INSTALL SILL PAN AND/OR PREP SILL (CONTINUED)

REMOVE PACKAGING AND INSPECT DOOR