Instructions / Assembly

8
Installation Instructions
for Premium
™
Vinyl Multi-Slide Atlantic Exterior Pocketing Door Systems (V-4500)
(JII-90004)
4. Seat #8 x 3" stainless steel at head screws in frame side jamb until
screw tips are approximately 1/16" through the gasket. Fig A
5. Align door frame side jamb to the sill. Ensure screws seat into screw
bosses on the sill. Fig B
ASSEMBLE SINGLE POCKET FRAME
1. Stage all frame parts on a clean at surface with the exterior surface
face down.
Fig C
#8 x 3" at head
NOTE: Remove the aluminum roller track(s) if installed into the sill (see
page 6 for part description). Aluminum roller track(s) can be removed by
sliding them out of the end of the sill.
2. Apply silicone to the walls of the sill (only to the end that will attach
to the side jamb).
3. Peel backing off of gasket and apply to side jamb leg.
6. First, tighten the outer row of screws until snug. Next, tighten the
inner row of screws until snug. Refer to Fig C for suggested order
screws are to be installed.
7. Ensure each screw is tightened equally and the gasket is compressed
to a hairline thickness.
8. Repeat for the remaining corner.
9. Remove any sealant squeeze out from the frame corners.
Sill
Gasket
Side Jamb Leg with Gasket Applied
Fig B
No leg – exterior
Leg – interior
Silicone
Fig A
5