Instructions / Assembly

1
Assembly and Installation Instructions
for Smooth-Pro
™
F-4500 Fiberglass Folding Wall System (JII-90076)
Thank you for selecting JELD-WEN products. Attached are
JELD-WEN’s recommended installation instructions for Smooth-Pro
™
F-4500 Fiberglass Folding Wall System. Read these instructions
thoroughly before beginning. They are designed to work in most
existing applications, however; existing conditions may require
the use of alternative methods to these instructions. If changes are
needed, they are made at the installer’s risk. For installations other
than indicated in these instructions, contact a building professional.
JELD-WEN does not endorse the installation of our products into a
barrier-type install system unless a sill pan is present, incorporated
with through-wall ashing and can drain to the exterior (along with
other “required” components). Failure to do so may result in the denial
of any warranty claims. To adequately protect your wall system, please
refer to “Appropriate Protection for Exterior Doors” for information on
protection requirements at www.jeld-wen.com. Areas such as Florida
and the Texas TDI region have different anchoring requirements based
on product certication. For information on specic products, visit
www.floridabuilding.org or www.tdi.texas.gov and follow the
anchoring schedule given in the drawings for the product instead of
the anchoring schedule in this document.
A minimum of 3-people will be needed to
install and safely move wall system units.
Congurations
2-Slab Folding
2+1 Folding