Installation Guide

Table Of Contents

Installation Instructions

for F-4500 Retractable Screen System (JII-90043)

Next, install the Top

Guide (A on page 2) by

tucking each end into

the Side Guides and

centering it in the frame.

Secure with # 8 x 3/4”

Phillips Screws in the pre-

drilled holes (1B below).

INSTALL SIDES AND TOP GUIDES

INSTALL BOTTOM GUIDE

Clean the door threshold surface and ensure it is level before install.

Locate the Bottom Guide and position it so it is centered in the frame and

tucked into the Side Guides. The white paper backing should be facing

down. NOTE: The adhesive is very sticky. Use care when positioning.

Begin by locating the

Side Guides (B on page

2). Install one on each

side of the door frame

and push to the top.

Secure using #8 x 3/4”

Phillips Screws in the pre-

drilled holes on each side

(1A below).

Remove the paper

backing from the Bottom

Guide and adhere it to

the bottom sill.

Install the side guides ush with the interior face

of the frame.

Recessing the screen into the wall system frame

may cause operational issues and/or conict with

the door components.