Instructions / Assembly

6
3
Sealant
Self-Adhered
Flashing
Self-Adhered
Flashing
Sealant
Sealant
Sealant
Rigid Flashing Rigid Flashing
Building Wrap
Brick
Sheathing
Rigid Flashing
Sealant
Sealant
2x4
Trim
Drywall
Sill Pan
5 5/8" Min.
Building Wrap
Drywall
Trim
2x4
Stucco
Sheathing
Sill Pan
5 5/8" Min.
Building
Wrap
Building
Wrap
Stucco Stucco
Sheathing Sheathing
Common Brick Veneer Rough Opening –
Rigid Flashing and Sill Pan Detail
Horizontal View
• Use rigid ashing to bridge any air gap between brick and
sheathing.
Vertical View
• Rigid ashing is suggested to bridge the gap between the header
and the lintel.
• The required sill pan must not extend past the leading edge of the
slab/suboor. The minimum sill pan depth is 5 5/8".
Typical Stud Framed Rough Opening –
Flashing and Sill Pan Detail
Horizontal View
• Flash the rough opening sides in a weatherproof manner
and incorporate with the water-resistive barrier or exterior
drainage plane.
Vertical View
• Flash the rough opening head in a weatherproof manner
and incorporate with the water-resistive barrier or exterior
drainage plane.
• The required sill pan must not extend past the leading edge of
the slab/suboor. The minimum sill pan depth is 5 5/8".
Self-Adhered
Flashing
Assembly and Installation Instructions
for Smooth-Pro
™
F-4500 Fiberglass Folding Wall System (JII-90076)
ADDITIONAL CONSIDERATIONS - PREP AND FLASHING