Installation Instructions
Table Of Contents
- Range Safety
- Installation Requirements
- Installation Instructions
- GAS CONVERSIONS
- Sécurité de la cuisinière
- Exigences d’installation
- Instructions d’installation
- Déballage de la cuisinière
- Retirer la porte
- Installation de la bride antibasculement
- Raccordement au gaz
- Vérification de l’emplacement de la bride antibasculement
- Ajustement de l’aplomb de la cuisinière
- Installer le plateau d’égouttement
- Système d’allumage électronique
- Installer la plinthe
- Terminer l’installation
- Conversions pour changement de gaz
4
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools Needed
For Propane/Natural Gas Conversions
Pipe wrench Adjustable wrench or
5/8"(16mm) wrench
1/8" x 4
1
/
4
" (3mmx100mm)
at‑blade screwdriver
#2 Phillips screwdriver
Drill 3/8" (9.5 mm) drive ratchet 15/16" (24 mm)
combinationwrench
Pliers
Level Tubing cutter 1/4" (6.4 mm), 3/8" (9.5 mm),
5/16" (7.9 mm) nut drivers
Marker or pencil
3/16" (4.8 mm) carbide tip
masonry bit
1/8" (3.2 mm) drill bit Pipe‑joint compound
resistanttoPropanegas
Noncorrosive leak‑detection
solution
Tape measure
Large at‑blade screwdriver Adjustable wrench T‑20 Torx Driver Masking tape
1/2" (1.3 cm) open end
wrench