Installation Instruction

INSTALLATION | 21
INSTALLATION
APPLIES TO:
1. Slightly loosen the panel bracket screws to allow
the panel to move to the left or right.
2. Adjust panels to achieve a 1/8" gap between
panels and adjacent cabinets. For French door
bottom mount and bottom mount models, align
the outside edge of the refrigerator panel to
the outside edge of the freezer panel on both
the sides. For side by side models, align the
refrigerator and freezer panels with adjacent
cabinets.
NOTE: Adjust the panel not the door, if
adjustments are needed to achieve alignment or
required spacing.
3. Tighten the panel bracket screws.
Installation Bloc
k
INSTALLATION
ADJUSTING REFRIGERATOR PANEL(S)
1/8"
1
2
3