Installation Instruction

TOOLS + PARTS
NOT PROVIDED
TOOLS

Cordless drill and drill bits or impact driver

Drill bit set including 3/32" and 1/8" diameter bits

Two adjustable wrenches

#2 Phillips bit

1/4" magnetic nut driver

#2 square-drive bit

48" or longer level or straight edge

3/8" and 1/2" open-end wrenches

Tape measure

Utility knife

Masking tape

Appliance dolly

Right angle drill adapter

6" drill extension

#8 pan head wood screws of assorted lengths
including 1", 1-1/4", 1-1/2"
PARTS

Flexible code-approved water supply line

Custom door overlay panels
• Stainless steel panels: order from JennAir
• Custom wood panels: consult a qualified
cabinetmaker or carpenter

Additional fasteners will be required according
to the kitchen furniture construction
This recommended process might be unfamiliar to you as an installer, but it adds
enormous value to both you and your client. Use the Rotter system to:
• Help position column without scratching
• Create precise 1/8" reveals on each side
• Always have ready-made shims tailored to each site
• Keep column stable in cutout over lifetime
• Eliminate misalignment issues for your client
WHY USE
ROTTER
SYSTEM
SHIMS?
INTRODUCTION 7
9/32”
1/4”
3/16” 1/8”
1/16”